Master Pozzolith

WhatsApp Order

Master Pozzolith is a high-performance concrete admixture designed to improve the workability, strength, and durability of concrete. It acts as a water-reducing agent and plasticizer, enabling reduced water content while maintaining slump and flow characteristics. This results in enhanced compressive strength, reduced permeability, and improved resistance to weathering and chemical attack. Master Pozzolith is widely used in ready-mix concrete, precast elements, and structural applications to optimize concrete performance and longevity.

Compare

Add to wishlist

Category: Admixtures Tags: Cement additive, Concrete admixture, Concrete plasticizer, MasterPozzolith, Water-reducing admixture

Description

Table of Contents

Master Pozzolith

Primary Uses

Water Reduction and Workability Enhancement

Reduces water content in concrete mixes without compromising workability, allowing for stronger concrete.
Improves slump retention and flow for easier placement and finishing.

Strength Improvement

Increases early and ultimate compressive strength of concrete.
Enhances cement hydration efficiency.

Durability Enhancement

Reduces permeability, improving resistance to chloride ingress, sulfate attack, and freeze-thaw cycles.
Enhances concrete’s resistance to cracking and surface scaling.

Secondary Uses

Precast Concrete

Used to improve surface finish and reduce curing time in precast concrete products.

Shotcrete Applications

Improves pumpability and cohesion in sprayed concrete for tunnels and retaining walls.

Grouting

Enhances flow and strength in grout mixes used for anchoring and repairs.

KEY PRODUCT FEATURES

1. Basic Identification Attributes

Chemical Name (IUPAC): Polycarboxylate-based water reducer (varies by formulation)
Common/Trade Name: Master Pozzolith
CAS Number: Proprietary mixture
HS Code: 3824.90.90 (Chemical preparations not elsewhere specified)
Synonyms: Water reducer; plasticizer; concrete admixture

2. Physical & Chemical Properties

Physical State: Liquid
Color & Odor: Amber to brown; mild chemical odor
pH: 6.5 – 8.5
Solubility: Miscible with water
Density: Approx. 1.1 – 1.2 g/cm³

3. Safety & Hazard Attributes

GHS Classification: Not classified as hazardous under normal handling
Toxicity: Low toxicity; avoid ingestion and prolonged skin contact
Exposure Limits: No specific limits; standard chemical handling precautions advised

4. Storage & Handling Attributes

Storage Conditions: Store in a cool, dry place away from freezing and direct sunlight
Container Type: Supplied in sealed plastic drums or containers
Shelf Life: Typically 12 months if stored properly
Handling Precautions: Use protective gloves and eye protection; avoid inhalation of mist

5. Regulatory & Compliance Attributes

Complies with ASTM and other international concrete admixture standards
Registered under relevant chemical safety regulations (e.g., REACH)

6. Environmental & Health Impact

Biodegradability: Readily biodegradable
Ecotoxicity: Low environmental impact when used as directed
Bioaccumulation: Not expected to bioaccumulate
Carcinogenicity/Mutagenicity: Not classified as hazardous

SAFETY HANDLING PRECAUTIONS

Safety Handling Precautions

PPE Required: Gloves and safety goggles recommended
Handling Guidelines: Use in well-ventilated areas; avoid direct skin and eye contact
Storage Measures: Keep containers tightly closed and stored away from incompatible materials

First Aid Measures

Inhalation: Move to fresh air if irritation occurs
Skin Contact: Wash thoroughly with soap and water
Eye Contact: Rinse with plenty of water for at least 15 minutes; seek medical attention if irritation persists
Ingestion: Rinse mouth; do not induce vomiting; seek medical advice

Firefighting Measures

Fire Hazards: Non-flammable liquid
Extinguishing Media: Use water spray, foam, or dry chemical extinguishers if needed for surrounding fires
Special Precautions: Use standard protective equipment
Hazardous Combustion Products: May produce carbon oxides under fire conditions