Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-14%
Jasmine Fragrance Oil
Original price was: $ 20.05.$ 19.94Current price is: $ 19.94.
Talcum Powder (Talc)
Original price was: $ 0.90.$ 0.77Current price is: $ 0.77.
Whatsapp Order
Talcum Powder is a naturally occurring mineral composed primarily of hydrated magnesium silicate. It is known for its softness, absorbency, and lubricating properties. Talc is widely used in cosmetic, pharmaceutical, industrial, and consumer products due to its ability to absorb moisture, improve texture, and provide a smooth, silky feel. The powder form allows easy dispersion and application across diverse sectors.
Description
Talcum Powder (Talc)
Primary Uses
- Cosmetics & Personal Care
- Body Powder: Used in talcum powders, baby powders, and deodorants for moisture absorption and skin soothing.
- Makeup & Foundation: Functions as a filler and texture enhancer in various makeup products.
- Pharmaceuticals
- Tablet & Pill Manufacturing: Acts as a glidant and anti-caking agent to improve powder flow and prevent clumping during production.
- Topical Applications: Used in medicated powders for skin conditions.
- Industrial Applications
- Plastics & Rubber: Serves as a filler to improve processing and mechanical properties.
- Paints & Coatings: Provides smoothness, improves opacity, and acts as a matting agent.
- Paper Industry: Enhances paper gloss, brightness, and printability.
Secondary Uses
- Ceramics
- Fluxing Agent: Used to improve the firing characteristics and finish of ceramic products.
- Agriculture
- Insecticide Carrier: Acts as a carrier and anti-caking agent in pesticide formulations.
- Food Industry
- Anti-caking Agent: Used in powdered food products to prevent clumping (food-grade talc only).
Additional information
| PACK SIZE |
50kg |
|---|
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Hydrated magnesium silicate
- Common/Trade Name: Talcum Powder, Talc
- CAS Number: 14807-96-6
- HS Code: 2526.20.00
- Synonyms: Talcum, talc powder, soapstone
2. Physical & Chemical Properties
- Physical State: Fine, soft powder
- Color & Odor: White to off-white; odorless
- Melting Point: Approx. 1500 °C (decomposes)
- Solubility: Insoluble in water and organic solvents
- Density: Approx. 2.58 g/cm³
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous; respirable talc dust may cause respiratory issues
- Toxicity: Generally low; prolonged inhalation of fine dust should be avoided
- Exposure Limits: Follow occupational exposure limits for respirable dust (e.g., OSHA PEL: 2 mg/m³)
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry, dust-free environment
- Container Type: Bags, drums, or bulk containers
- Shelf Life: Indefinite if stored properly
- Handling Precautions: Minimize dust generation; use appropriate PPE
5. Regulatory & Compliance Attributes
- Complies with cosmetic and pharmaceutical regulations where applicable
- Food-grade talc meets FDA and Codex Alimentarius standards
- Manufactured under GMP conditions for applicable uses
- Meets safety and environmental regulations (REACH, OSHA, GHS)
6. Environmental & Health Impact
- Biodegradability: Inert mineral; not biodegradable
- Ecotoxicity: Low environmental impact; avoid release of fine dust in air or water
- Bioaccumulation: Not applicable
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Use dust mask or respirator, gloves, and eye protection when handling powders
- Handling Guidelines: Work in well-ventilated areas to reduce dust exposure
- Storage Measures: Keep containers tightly closed and dry
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if breathing difficulty occurs
- Skin Contact: Wash with soap and water if irritation occurs
- Eye Contact: Rinse eyes with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Rinse mouth; seek medical advice if symptoms occur
Firefighting Measures
- Fire Hazards: Non-flammable; dust may pose explosion risk in confined spaces
- Extinguishing Media: Use water spray, foam, or dry chemical extinguishers as appropriate
- Hazardous Combustion Products: None
Related products
Calcined Kaolin
Calcined Kaolin is a fine, white to off-white powder produced by heating natural kaolin clay to high temperatures (typically between 600°C and 900°C) in a controlled process called calcination. This thermal treatment removes chemically bound water, changes the crystalline structure, and enhances the physical and chemical properties of kaolin. The resulting product exhibits increased brightness, hardness, and opacity, making it highly valuable as a functional additive and filler in numerous industrial applications. Calcined Kaolin is widely used in coatings, ceramics, plastics, rubber, paper, and paint industries to improve durability, brightness, and performance.
Carbocisteine AJI 92
Carbocisteine AJI 92 is a high-purity pharmaceutical-grade amino acid derivative, chemically known as S-carboxymethyl-L-cysteine. It is a white to off-white crystalline powder with a slightly sulfurous odor and is freely soluble in water. Carbocisteine functions primarily as a mucolytic agent—reducing the viscosity of mucus and promoting expectoration in respiratory tract infections. The "AJI 92" specification refers to its compliance with the purity standards established by Ajinomoto's amino acid quality benchmarks, ensuring it meets stringent pharmaceutical-grade quality control for active pharmaceutical ingredients (APIs). It is widely used in oral syrups, tablets, and granules in both human and veterinary medicine.
Carbomer
Carbomer is a high molecular weight, crosslinked polyacrylic acid polymer used primarily as a rheology modifier, thickening agent, and suspension stabilizer. Supplied as a fluffy white powder, it exhibits high viscosity and excellent clarity when neutralized and dispersed in water or alcohol-water systems. Carbomer 940 is widely valued for its ability to form clear gels, control flow properties, and stabilize emulsions. It is commonly used in cosmetics, personal care, pharmaceuticals, and household formulations due to its consistency, compatibility, and efficient thickening performance at low concentrations.
Magnesium Carbonate Light
Magnesium Carbonate Light is a fine, white, odorless powder primarily composed of magnesium carbonate (MgCO₃). It is characterized by its light texture and high purity. This mineral compound is widely used across various industries due to its excellent absorption properties, mild alkalinity, and non-toxic nature. Magnesium Carbonate Light is commonly employed as an antacid, drying agent, filler, and flow aid in food, pharmaceutical, cosmetic, and industrial applications.
Master Fibre
Master Fibre is a high-quality synthetic fiber additive designed to reinforce concrete and mortar mixtures. It improves structural integrity by enhancing tensile strength, reducing cracking, and increasing durability. The fibers disperse uniformly within the mix, providing better load distribution and impact resistance in industrial, commercial, and residential construction applications. Master Fibre enhances performance without compromising workability, making it ideal for use in concrete slabs, pavements, beams, and repair mortars.
Polymer Fiber
Polymer Fiber refers to a wide range of synthetic fibers made from polymer materials such as polypropylene, polyester, nylon, polyethylene, and acrylics. These fibers are engineered for high tensile strength, durability, flexibility, and resistance to chemicals and moisture. Polymer fibers are widely used in construction, textiles, filtration, composites, and industrial applications to improve mechanical properties, enhance structural integrity, and provide specialized functional benefits.
Polywhite B
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
Sodium Sulphate
Sodium Sulphate (Na₂SO₄) is a white crystalline powder or granule, odorless and highly soluble in water. This 25kg packaged product is widely used in detergents, glass manufacturing, chemical industries, and pulp and paper processing. It acts as a filler, bulking agent, and drying agent, with excellent stability and non-reactivity under standard storage conditions. Its cost-effectiveness and availability make it an essential raw material in many industrial processes.
