Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Dip Circle
Original price was: $ 19.50.$ 19.35Current price is: $ 19.35.
A Dip Circle is a precision scientific instrument used for measuring the magnetic dip or inclination angle of the Earth’s magnetic field at a specific location. It consists of a magnetic needle or dip needle mounted on a graduated circular scale, which can rotate freely in the vertical plane. The instrument allows geologists, physicists, and surveyors to determine the angle between the horizontal plane and the Earth’s magnetic field lines, an important parameter in geomagnetic studies and navigation. Dip circles are commonly employed in academic research, mineral exploration, and educational demonstrations to analyze variations in Earth’s magnetism and assist in directional orientation.
Dip Circle
Primary Uses
- Geophysical and Laboratory Applications
- Measuring the magnetic dip (inclination angle) of Earth’s magnetic field.
- Used in geophysical surveys to map magnetic field variations.
- Employed in mineral exploration to detect magnetic anomalies.
- Assists in calibrating magnetic compasses and navigational instruments.
- Used in academic and research labs for studying geomagnetism and magnetic properties.
- Provides data for understanding Earth’s magnetic field behavior and shifts over time.
Secondary Uses
- Educational and Environmental Applications
- Utilized in universities and schools for teaching geomagnetism and Earth sciences.
- Demonstrates principles of magnetism and angular measurement to students.
- Supports environmental and archaeological investigations involving magnetic surveys.
- Can be used in conjunction with magnetometers for comprehensive magnetic mapping.
- Assists in wildlife tracking and orientation studies that rely on magnetic cues.
1.Basic Identification Attributes
- Instrument Type: Magnetic dip angle measuring device
- Scale: Circular graduated scale marked in degrees
- Needle: Magnetized dip needle balanced on a pivot
- Construction: Often mounted in a protective case or frame
2.Physical & Chemical Properties
- Material: Magnetic needle typically made from steel or alloy; frame may be wood, plastic, or metal
- Sensitivity: Calibrated to detect small changes in magnetic inclination
- Size: Portable models available for fieldwork; larger bench models for labs
- Durability: Designed for precision and repeatability under varied environmental conditions
3.Safety & Hazard Attributes
- Non-hazardous under normal use
- Handle needle carefully to avoid magnetic interference or damage
- Avoid exposure to strong external magnetic fields that may affect accuracy
4.Storage & Handling Attributes
- Store in a dry, dust-free environment to prevent corrosion and damage
- Protect needle and pivot from shock or mechanical damage
- Calibrate periodically to maintain accuracy
- Use protective covers or cases during transport
5.Regulatory & Compliance Attributes
- Manufactured in accordance with scientific instrument quality standards
- Suitable for use in research, educational, and professional survey environments
- Compliance with ISO standards for measurement accuracy where applicable
6.Environmental & Health Impact
- Minimal environmental impact due to mechanical and non-electrical nature
- No chemical or electronic waste generated during operation
- Promotes scientific understanding of Earth’s magnetic environment
Safety Handling Precautions
- Avoid sudden impacts or dropping the instrument to prevent misalignment
- Use away from electronic devices and magnets to avoid interference
- Follow calibration and maintenance guidelines for consistent results
First Aid Measures
- Not applicable; instrument poses no direct health risk
- If injury occurs from sharp needle ends, clean wounds and seek medical care if needed
Firefighting Measures
- Non-flammable device
- Use standard extinguishing methods for surrounding materials in case of fire
Related products
Absorption Tower
An Absorption Tower is a vertical vessel used in industrial processes to remove specific components from gas streams by contact with a liquid solvent. This equipment facilitates mass transfer between the gas and liquid phases, allowing targeted pollutants or valuable compounds to be absorbed efficiently. Absorption Towers are commonly employed in chemical plants, refineries, and environmental control systems for gas scrubbing, purification, and recovery applications. They are designed for optimal gas-liquid contact, often using packing materials or trays to enhance surface area and improve absorption efficiency.
Banana Plug
The Banana Plug is a single-wire electrical connector used to join wires to equipment in testing, measuring, and laboratory applications. It features a cylindrical metal pin with a spring mechanism to ensure a secure and reliable connection. The plug is widely used for quick and easy connections in electronic testing devices, audio systems, and laboratory instruments. Made from high-conductivity metals such as brass or copper and often gold- or nickel-plated for corrosion resistance, the Banana Plug provides consistent electrical conductivity and durability.
Bell in Vacuum
Bell in Vacuum is a crucial component used in vacuum systems to create an airtight seal and protect sensitive equipment from atmospheric contamination. Typically made of durable, corrosion-resistant materials, it forms part of vacuum chambers or devices requiring controlled environments. The bell ensures the maintenance of vacuum integrity by preventing air ingress, making it essential for experiments and industrial processes that depend on low-pressure or vacuum conditions.
Bell in Vacuum with Air Pump with Plate
Bell in Vacuum with Air Pump with Plate is an integrated vacuum apparatus used to create and maintain low-pressure environments for laboratory and industrial applications. This assembly includes a vacuum bell, an air pump to evacuate air from the chamber, and a sturdy plate to support or seal samples or components during vacuum processes. Designed for durability and reliability, it is widely used in experiments requiring controlled atmospheric pressure, including vacuum filtration, drying, and physical science demonstrations.
Centre of Gravity apparatus
The Centre of Gravity Apparatus is a precision instrument designed to demonstrate and measure the center of gravity of various objects. It consists of a rigid frame, adjustable clamps, and pointers that help identify the balance point of irregular shapes and composite bodies. Widely used in physics laboratories and industrial training, this apparatus aids in understanding the principles of equilibrium, stability, and moments. Its sturdy construction ensures accurate and repeatable measurements essential for educational and quality control purposes.
Crookes radiometer
The Crookes Radiometer, also known as a light mill, is a scientific apparatus consisting of a glass bulb containing a partial vacuum and a rotor with vanes coated black on one side and white or silver on the other. When exposed to light or radiant energy, the vanes rotate due to differential thermal transpiration, demonstrating principles of gas kinetics and energy conversion. It is commonly used for educational demonstrations of light pressure and thermodynamics.
Crucible Tongs
Crucible Tongs are specialized metal tools designed for safely handling hot crucibles, evaporating dishes, and other laboratory apparatus exposed to high temperatures. Made from durable, heat-resistant metals such as stainless steel or nickel-plated steel, these tongs provide a firm grip, ensuring the safe transfer of heated items during laboratory procedures, including heating, melting, and chemical reactions.
Dissecting scissors
Dissecting Pan with Wax is a specialized laboratory tool consisting of a shallow metal or plastic pan filled with a layer of soft, moldable wax used to securely position biological specimens during dissection. The wax surface allows specimens to be pinned or stabilized without damage, providing a firm and adjustable platform for precise anatomical work. This setup is commonly used in medical, veterinary, and educational laboratories to facilitate detailed examination, surgical practice, and teaching demonstrations. The pan is typically durable, easy to clean, and compatible with standard dissection instruments.
