Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Back to products
Ferric Chloride Anhydrous
Original price was: $ 2.00.$ 1.02Current price is: $ 1.02.
Nitro Cellulose
Whatsapp Order
Nitro Cellulose is a highly flammable compound produced by nitrating cellulose through exposure to nitric acid and sulfuric acid. It is a versatile material widely used in coatings, lacquers, explosives, and propellants due to its film-forming properties and rapid drying capability. Nitro Cellulose is available in various grades depending on the nitrogen content and viscosity, making it suitable for industrial, commercial, and military applications.
Description
Nitro Cellulose
Primary UsesÂ
- Coatings and Lacquers
- Used extensively in wood finishes, automotive coatings, and nail polishes for its quick drying and glossy finish properties.
- Serves as a binder in paints and varnishes.
- Explosives and Propellants
- Key ingredient in smokeless gunpowder and other propellants due to its high energy release and clean combustion.
- Used in military ammunition and pyrotechnics.
- Printing Inks
- Used as a binder in flexographic and gravure printing inks.
- Provides excellent adhesion and gloss to printed materials.
- Adhesives and Films
- Utilized in adhesive formulations for packaging and lamination.
- Forms thin, flexible films in photographic and industrial applications.
Secondary Uses
- Cosmetics
- Used in nail polish and hair sprays as a film-forming agent.
- Leather Finishing
- Provides protective coatings on leather goods.
- Textile Finishing
- Applied as a sizing agent or finish to improve fabric strength and sheen.
- Specialty Applications
- Used in the manufacture of cellulose-based plastics and lacquers for musical instruments and toys.
KEY PRODUCT FEATURES
Key Attributes
Basic Identification Attributes
- Chemical Name (IUPAC): Cellulose nitrate
- Common/Trade Name: Nitro Cellulose, Gun Cotton
- CAS Number: 9004-70-0
- HS Code: 3912.10.00
- Synonyms: Pyroxylin, guncotton
Physical & Chemical Properties
- Physical State: White to pale yellow fibrous or granular solid
- Odor: Mild acidic odor
- Nitrogen Content: Typically 11-13% (varies by grade)
- Solubility: Soluble in acetone, ether, ethanol; insoluble in water
- Density: Approx. 1.6 g/cm³
- Flammability: Highly flammable and explosive under certain conditions
Safety & Hazard Attributes
- GHS Classification: Flammable solids (Category 1), Explosive (varies by grade)
- Toxicity: Moderate; dust inhalation can cause irritation
- Exposure Limits: Use in controlled environments to limit dust and vapors
Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry, well-ventilated area away from heat, sparks, and open flames
- Container Type: Supplied in sealed, non-metallic containers or drums
- Shelf Life: Typically 1–2 years under proper storage
- Handling Precautions: Avoid friction, impact, static discharge; use explosion-proof equipment
Regulatory & Compliance Attributes
- Complies with military and industrial standards for explosives and coatings
- Subject to strict transport regulations due to explosive potential
- Registered under relevant chemical safety and explosives control laws
Environmental & Health Impact
- Biodegradability: Partially biodegradable under environmental conditions
- Ecotoxicity: Low environmental risk when handled properly
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Flame-resistant clothing, gloves, eye protection, and respiratory protection if dusty
- Handling Guidelines: Use grounding and bonding to prevent static; avoid open flames
- Storage Measures: Segregate from incompatible materials such as acids and reducing agents
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if respiratory symptoms persist
- Skin Contact: Wash with soap and water; seek medical help if irritation occurs
- Eye Contact: Rinse immediately with water for 15 minutes; consult a physician if irritation continues
- Ingestion: Do not induce vomiting; seek medical advice promptly
Firefighting Measures
- Fire Hazards: Highly flammable and explosive under heat or friction
- Extinguishing Media: Use water spray or fog; do not use dry chemical extinguishers on large fires
- Special Precautions: Evacuate area; wear full protective and respiratory equipment
- Hazardous Combustion Products: Nitrogen oxides, carbon monoxide, and other toxic gases
Related products
Calcium Carbonate Filler
Calcium Carbonate Filler is a high-quality, uncoated ground calcium carbonate (GCC) specially engineered for use as a filler in polyethylene (PE) and other polyolefin resins. This grade of calcium carbonate is designed to enhance the physical and mechanical properties of plastics while providing cost-effective bulk and improved processing. It is a fine, white, odorless powder with excellent brightness, high purity, and uniform particle size distribution. Its use improves stiffness, impact resistance, dimensional stability, and surface finish in polyethylene applications such as films, sheets, pipes, and molded parts.
Calcium Carbonate Light
Calcium Carbonate Light is a finely ground, low bulk density natural mineral composed primarily of calcium carbonate (CaCO₃). Compared to standard grades, it has a lower density and larger particle size distribution, making it suitable for applications where light weight and high brightness are important. This form is extensively used as a filler and extender in industries such as plastics, paints, rubber, paper, adhesives, and construction materials to improve opacity, brightness, and texture, while maintaining low weight and cost efficiency. Its chemical inertness and whiteness provide functional and aesthetic advantages across formulations.
Domacryl 251 50X
Domacryl is a high-performance acrylic polymer latex designed for use as a binder in water-based coatings, adhesives, sealants, and construction materials. It is a styrene-acrylic copolymer emulsion offering excellent film formation, adhesion, durability, and chemical resistance. Domacryl provides superior mechanical strength and flexibility in formulated products, making it ideal for applications requiring long-lasting protection and enhanced aesthetic qualities. The polymer is supplied as a stable aqueous dispersion with approximately 50% solids content, packed in bulk (190 kg drums) for industrial use.
Melamine
Melamine is an organic compound widely used as a raw material in the production of melamine-formaldehyde resins, laminates, adhesives, coatings, and flame retardants. It offers excellent hardness, thermal stability, and chemical resistance. Supplied in 25kg bags, melamine is a white crystalline powder with high nitrogen content, making it a valuable additive in plastics, construction materials, and surface treatments.
Polywhite B Chinaclay
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
PP Raffia 1003
PP Raffia 1003 is a polypropylene homopolymer resin commonly used for manufacturing raffia fibers and woven sacks. It offers high tensile strength, excellent dimensional stability, and good resistance to chemicals and environmental stress. This grade is ideal for producing durable woven fabrics used in packaging, agriculture, and construction applications.
PP Raffia RH03 (Woven)
PP Raffia RH03 is a woven polypropylene fabric made from homopolymer polypropylene resin, designed for high strength, durability, and excellent dimensional stability. It is widely used in the manufacturing of woven sacks, bags, and other flexible packaging solutions. The woven structure enhances tear resistance and load-bearing capacity, making it suitable for industrial and agricultural packaging applications.
Propylene PP Non Woven RH 38
Propylene PP Non Woven RH 38 is a polypropylene-based non-woven fabric known for its strength, durability, and lightweight properties. Manufactured through a process that binds polypropylene fibers without weaving, it results in a fabric that is breathable, resistant to chemicals and moisture, and highly versatile. This product is widely used in various industrial, medical, and consumer applications where disposable or reusable fabric is needed.
