Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Talcum Powder (Talc)
Original price was: $ 0.90.$ 0.77Current price is: $ 0.77.
Talcum Powder is a naturally occurring mineral composed primarily of hydrated magnesium silicate. It is known for its softness, absorbency, and lubricating properties. Talc is widely used in cosmetic, pharmaceutical, industrial, and consumer products due to its ability to absorb moisture, improve texture, and provide a smooth, silky feel. The powder form allows easy dispersion and application across diverse sectors.
Talcum Powder (Talc)
Primary Uses
- Cosmetics & Personal Care
- Body Powder: Used in talcum powders, baby powders, and deodorants for moisture absorption and skin soothing.
- Makeup & Foundation: Functions as a filler and texture enhancer in various makeup products.
- Pharmaceuticals
- Tablet & Pill Manufacturing: Acts as a glidant and anti-caking agent to improve powder flow and prevent clumping during production.
- Topical Applications: Used in medicated powders for skin conditions.
- Industrial Applications
- Plastics & Rubber: Serves as a filler to improve processing and mechanical properties.
- Paints & Coatings: Provides smoothness, improves opacity, and acts as a matting agent.
- Paper Industry: Enhances paper gloss, brightness, and printability.
Secondary Uses
- Ceramics
- Fluxing Agent: Used to improve the firing characteristics and finish of ceramic products.
- Agriculture
- Insecticide Carrier: Acts as a carrier and anti-caking agent in pesticide formulations.
- Food Industry
- Anti-caking Agent: Used in powdered food products to prevent clumping (food-grade talc only).
| PACK SIZE | 50kg |
|---|
1. Basic Identification Attributes
- Chemical Name (IUPAC): Hydrated magnesium silicate
- Common/Trade Name: Talcum Powder, Talc
- CAS Number: 14807-96-6
- HS Code: 2526.20.00
- Synonyms: Talcum, talc powder, soapstone
2. Physical & Chemical Properties
- Physical State: Fine, soft powder
- Color & Odor: White to off-white; odorless
- Melting Point: Approx. 1500 °C (decomposes)
- Solubility: Insoluble in water and organic solvents
- Density: Approx. 2.58 g/cm³
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous; respirable talc dust may cause respiratory issues
- Toxicity: Generally low; prolonged inhalation of fine dust should be avoided
- Exposure Limits: Follow occupational exposure limits for respirable dust (e.g., OSHA PEL: 2 mg/m³)
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry, dust-free environment
- Container Type: Bags, drums, or bulk containers
- Shelf Life: Indefinite if stored properly
- Handling Precautions: Minimize dust generation; use appropriate PPE
5. Regulatory & Compliance Attributes
- Complies with cosmetic and pharmaceutical regulations where applicable
- Food-grade talc meets FDA and Codex Alimentarius standards
- Manufactured under GMP conditions for applicable uses
- Meets safety and environmental regulations (REACH, OSHA, GHS)
6. Environmental & Health Impact
- Biodegradability: Inert mineral; not biodegradable
- Ecotoxicity: Low environmental impact; avoid release of fine dust in air or water
- Bioaccumulation: Not applicable
Safety Handling Precautions
- PPE Required: Use dust mask or respirator, gloves, and eye protection when handling powders
- Handling Guidelines: Work in well-ventilated areas to reduce dust exposure
- Storage Measures: Keep containers tightly closed and dry
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if breathing difficulty occurs
- Skin Contact: Wash with soap and water if irritation occurs
- Eye Contact: Rinse eyes with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Rinse mouth; seek medical advice if symptoms occur
Firefighting Measures
- Fire Hazards: Non-flammable; dust may pose explosion risk in confined spaces
- Extinguishing Media: Use water spray, foam, or dry chemical extinguishers as appropriate
- Hazardous Combustion Products: None
Related products
Aluminium Silicate
Aluminium silicate is an inorganic compound composed of aluminum, silicon, and oxygen, often found naturally as a major component of clay minerals such as kaolinite, halloysite, and other aluminosilicates. It is a white to off-white powder with excellent thermal stability, chemical inertness, and physical durability. Due to its wide range of physicochemical properties—including high melting point, non-toxicity, and adsorptive capabilities—aluminium silicate is extensively used across diverse industries including ceramics, paints, paper, rubber, plastics, cosmetics, and pharmaceuticals. Its unique structure imparts benefits such as heat resistance, improved mechanical strength, and anti-caking properties, making it a vital raw material in both industrial and consumer products.
Calcined Kaolin
Calcined Kaolin is a fine, white to off-white powder produced by heating natural kaolin clay to high temperatures (typically between 600°C and 900°C) in a controlled process called calcination. This thermal treatment removes chemically bound water, changes the crystalline structure, and enhances the physical and chemical properties of kaolin. The resulting product exhibits increased brightness, hardness, and opacity, making it highly valuable as a functional additive and filler in numerous industrial applications. Calcined Kaolin is widely used in coatings, ceramics, plastics, rubber, paper, and paint industries to improve durability, brightness, and performance.
Coated Calcium Carbonate
Coated Calcium Carbonate is a fine, white, odorless powder consisting of naturally occurring ground calcium carbonate (CaCO₃) treated with a surface coating—typically stearic acid or other fatty acids—to enhance compatibility with non-polar matrices. This coating improves dispersion in plastic and rubber formulations, reduces moisture pickup, and enhances the physical properties of the final product. Compared to uncoated grades, coated calcium carbonate offers better hydrophobicity, improved flow properties, and stronger interfacial bonding in polymeric systems. It is widely used in plastics, rubber, paints, sealants, adhesives, paper, and more.
Corn Starch Industrial Grade
Corn Starch Industrial Grade is a finely milled, white powder derived from the endosperm of maize (Zea mays). Unlike food-grade starch, industrial grade is tailored for non-food applications where its thickening, adhesive, and film-forming properties are exploited. It consists primarily of amylose and amylopectin polysaccharides and is valued for its biodegradability, renewability, and cost-effectiveness. Industrial corn starch is used extensively as a raw material or functional additive across a wide variety of manufacturing processes, including paper, textiles, adhesives, and packaging industries.
Sodium Alumina Silicate
 Sodium Alumina Silicate is an inorganic compound consisting of sodium, aluminum, and silicon oxides. It is typically found as a white, amorphous powder with excellent adsorption and ion-exchange properties. Commonly used as a detergent builder, water softener, and desiccant, sodium alumina silicate improves cleaning efficiency, controls water hardness, and aids moisture absorption. Its thermal stability and chemical inertness make it valuable across detergent manufacturing, water treatment, and various industrial processes.
Sodium Sulphate
 Sodium Sulphate (Na₂SO₄) is a white crystalline powder or granule, odorless and highly soluble in water. This 25kg packaged product is widely used in detergents, glass manufacturing, chemical industries, and pulp and paper processing. It acts as a filler, bulking agent, and drying agent, with excellent stability and non-reactivity under standard storage conditions. Its cost-effectiveness and availability make it an essential raw material in many industrial processes.
Xysil Fumed Silica
Xysil Fumed Silica is a high-purity fumed silica produced through flame hydrolysis of silicon tetrachloride. It is an ultra-fine, amorphous, white powder with a very high surface area and low bulk density. Xysil 200 is widely used as a reinforcing filler, thickening agent, anti-caking agent, and rheology modifier in various industrial applications. Its unique physical properties improve the mechanical strength, viscosity, and stability of formulated products.
