Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Zinc Sulphide Extra Pure
Original price was: $ 18.00.$ 17.87Current price is: $ 17.87.
Zinc Sulphide Extra Pure is a high-purity, white to pale yellow, odorless crystalline or powdery inorganic compound with the formula ZnS. It is widely used as a phosphorescent and luminescent material in laboratory and industrial applications. Known for its excellent optical properties, it serves as a key reagent in analytical chemistry for spectroscopic standards and as an activator in glass and ceramics. In pharmaceuticals and cosmetics, it acts as a UV blocker and luminescent agent.
Due to its inert nature and stability, Zinc Sulphide Extra Pure is ideal for use in paints, safety coatings, and electronic devices requiring phosphor materials. It requires careful handling to avoid dust inhalation and must be stored away from acids and moisture to prevent release of toxic hydrogen sulfide gas.
Zinc Sulphide Extra Pure
PRIMARY USES
- Analytical Reagent & Laboratory Applications:
- Used as a luminescent material in qualitative and quantitative chemical analysis.
- Acts as a phosphorescent reagent for detection and measurement in analytical chemistry.
- Employed in preparation of calibration standards for optical and spectroscopic studies.
- Glass & Ceramics Manufacturing:
- Used as an activator and opacifier in glass and ceramic formulations.
- Enhances luminescent and fluorescence properties in specialty glass materials.
- Pharmaceutical & Cosmetic Industry:
- Utilized in certain topical formulations for skin protection and cosmetic luminescence.
- Applied in sunscreen formulations as a UV light blocking agent.
SECONDARY USES
- Paints and Pigments:
- Used as a pigment and phosphorescent agent in luminescent paints and coatings.
- Employed in safety signs and emergency lighting for glow-in-the-dark effects.
- Electronics and Optoelectronics:
- Key component in phosphor materials for cathode ray tubes and LED displays.
- Used in infrared sensors and other optical devices.
1. Basic Identification Attributes
- Chemical Name: Zinc Sulphide
- CAS Number: 1314-98-3
- HS Code: 2833.29.00
- Molecular Formula: ZnS
- Synonyms:
- Zinc sulfide
- Sphalerite (natural mineral form)
2. Physical & Chemical Properties
- Physical State: Solid (powder or crystalline)
- Color & Odor: White to pale yellow, odorless
- Boiling Point & Melting Point:
- Melting Point: ~1,185 °C
- Sublimes before boiling under atmospheric pressure
- Density/Specific Gravity: ~4.09 g/cm³
- Solubility:
- Insoluble in water
- Slightly soluble in acids and alkalis
- pH Level: Neutral to slightly alkaline in aqueous suspensions
- Vapor Pressure & Volatility: Not volatile
- Flash Point: Not applicable (non-flammable)
- Autoignition Temperature: Not applicable
- Viscosity: Not applicable
3. Safety & Hazard Attributes
- Hazard Class (GHS Classification):
- May cause mild eye and skin irritation
- Inhalation of dust may cause respiratory irritation
- NFPA Ratings:
- Health: 1
- Flammability: 0
- Reactivity: 0
- Exposure Limits:
- No specific OSHA PEL or ACGIH TLV established
- Reactivity:
- Stable under normal laboratory conditions
- Reacts with strong acids releasing hydrogen sulfide (H₂S) gas
4. Storage & Handling Attributes
- Storage Conditions:
- Store in a tightly sealed container in a dry, cool, well-ventilated area
- Protect from moisture and acids
- Incompatible Materials:
- Strong acids (release toxic H₂S gas)
- Oxidizing agents
- Container Type:
- Plastic or glass containers with airtight seals
- Shelf Life & Expiration Date:
- Stable for several years if stored properly
- Special Handling Requirements:
- Use gloves, safety goggles, and dust masks when handling powder
- Avoid inhaling dust and contact with eyes and skin
5. Regulatory & Compliance Attributes
- Regulatory Status:
- Approved for laboratory use and industrial applications
- Listed under REACH and OSHA inventories
- Transportation Restrictions:
- Not classified as hazardous for transport under normal conditions
- Waste Disposal Method:
- Dispose of according to local environmental regulations
- Avoid release into water systems
6. Environmental & Health Impact
- Ecotoxicity:
- Low toxicity to aquatic organisms but avoid environmental release
- Persistence in Environment:
- Inorganic, stable compound, does not biodegrade
- Carcinogenicity/Mutagenicity:
- Not classified as carcinogenic or mutagenic
- Biodegradability:
- Inorganic; not biodegradable
SAFETY PRECAUTIONS
Personal Protective Equipment (PPE):
- Wear chemical-resistant gloves (e.g., nitrile or butyl rubber).
- Use safety goggles or face shield to prevent eye contact.
- Wear a lab coat or protective clothing.
- If dust is generated, use a suitable dust mask or respirator.
Handling:
- Handle in a well-ventilated area.
- Avoid contact with skin, eyes, and clothing.
- Do not breathe dust.
- Wash hands thoroughly after handling.
Storage:
- Store in a tightly sealed container.
- Keep in a dry, cool, well-ventilated place.
- Protect from moisture and incompatible materials such as acids and oxidizing agents.
FIRST AID MEASURES
Inhalation:
- Move to fresh air immediately.
- Seek medical attention if breathing becomes difficult.
Skin Contact:
- Wash thoroughly with soap and water.
- Remove contaminated clothing.
- Seek medical advice if irritation occurs.
Eye Contact:
- Rinse immediately with plenty of water for at least 15 minutes.
- Keep eyelids open during rinsing.
- Seek medical attention promptly.
Ingestion:
- Rinse mouth with water.
- Do not induce vomiting unless advised by medical personnel.
- Seek medical attention if symptoms appear.
FIRE FIGHTING MEASURES
Flammability:
- Non-flammable solid.
Extinguishing Media:
- Use dry chemicals, CO₂, foam, or water spray.
Hazardous Combustion Products:
- When heated, may release toxic zinc oxide fumes.
Firefighter Protection:
- Wear self-contained breathing apparatus (SCBA) and full protective gear.
- Avoid inhaling any thermal decomposition products.
Related products
Bismuth Nitrate Extra Pure
Bismuth Nitrate Extra Pure is a high-purity inorganic compound composed of bismuth and nitrate ions, typically supplied as a crystalline solid or powder. It is widely used as a precursor in chemical synthesis, pharmaceuticals, cosmetics, and industrial applications. Known for its excellent solubility in nitric acid and water, this compound serves as a source of bismuth ions in various chemical reactions and formulations. Its high purity ensures minimal impurities, making it suitable for sensitive applications requiring consistent quality and performance.
Octyl Methoxycinnamate Extra Pure
Octyl Methoxycinnamate Extra Pure is a high-purity organic compound widely used as a UV-B filter in sunscreen formulations and personal care products. Known chemically as Ethylhexyl Methoxycinnamate, it functions by absorbing ultraviolet light in the 280–320 nm range, thereby protecting skin from sunburn and photoaging.
In its Extra Pure form, OMC offers exceptional quality for cosmetic-grade applications, pharmaceutical formulations, and research requiring stringent purity levels. It is typically a clear, oily liquid with good solubility in oils and alcohols, making it ideal for incorporation into emulsions, creams, and lotions. Aside from its cosmetic uses, it is occasionally used in plastic and polymer stabilization where UV protection is needed. It should be stored in cool, dark conditions to maintain its stability and efficacy.
Polyglycerol-10-Laurate Extra Pure
Polyglycerol-10-laurate Extra Pure is a high-purity, non-ionic surfactant and emulsifier composed of ten glycerol units esterified with lauric acid. This versatile compound is especially valued in cosmetic, pharmaceutical, and food-grade applications where ultra-high purity and biocompatibility are critical.
Known for its excellent emulsifying, dispersing, and solubilizing properties, Polyglycerol-10-laurate is widely used in formulations for creams, lotions, and other personal care products, particularly those designed for sensitive skin. In pharmaceuticals, it aids in enhancing bioavailability and improving the stability of active ingredients, while in food applications, it serves as a safe emulsifier and texturizer, often used in dairy and confectionery products.
Potassium Carbonate Extra Pure
Potassium Carbonate Extra Pure is a high-purity, white, hygroscopic, water-soluble salt with the chemical formula K₂CO₃. It is known for its alkaline properties and exceptional solubility in water, forming a strongly basic solution that is widely used in laboratory and industrial processes. Its Extra Pure grade ensures it meets stringent standards for research, analytical, and high-spec formulation work.
This compound is essential in buffer preparation, pH adjustment, and titration analysis in laboratory chemistry. It also serves as a drying agent for certain solvents and gases due to its moisture-absorbing nature. In industrial applications, Potassium Carbonate is a key ingredient in the manufacture of glass, soaps, and dyes, and is also used in fermentation processes to control acidity. In the food industry, it functions as a food additive (E501), commonly used as a buffering or raising agent in baking.
To maintain its quality, Potassium Carbonate Extra Pure should be stored in a tightly sealed container, in a dry and cool environment, away from acids and moisture, as it readily absorbs water and carbon dioxide from the air. Proper handling using protective gloves and eye protection is advised, especially in concentrated solutions, due to its caustic nature.
Sodium Acetate Trihydrate Extra Pure
Sodium Acetate Trihydrate Extra Pure is a white crystalline solid with the formula C₂H₃NaO₂·3H₂O. It serves primarily as a buffering agent in laboratory and biochemical applications and is widely used in food as a preservative and flavor enhancer (E262). This compound is essential in molecular biology for protein and nucleic acid precipitation and serves as a stabilizer in pharmaceutical and cosmetic formulations. It should be stored dry and handled with proper protective equipment due to its mildly irritating nature.
Sodium Sulphate Anhydrous Extra Pure
Sodium Sulphate Anhydrous Extra Pure is a high-purity, white, odorless crystalline powder widely used in laboratories and industry as a drying agent, filler, and reagent. It plays a vital role in chemical manufacturing, including detergents, glass, and paper production. Its non-toxic nature and stable chemical properties make it suitable for pharmaceutical formulations and food processing under controlled conditions. Sodium Sulphate Anhydrous Extra Pure must be stored in a dry environment to maintain its quality and handled with proper protective equipment to avoid dust inhalation.
Sodium Thiosulphate Pentahydrate Extra Pure
Sodium Thiosulphate Pentahydrate Extra Pure is a white, crystalline, odorless compound widely used in laboratories and industry as a reducing agent, titrant, and water dechlorination chemical. It plays a vital role in photographic fixing, water treatment, and pharmaceutical antidotes for cyanide poisoning. This Extra Pure grade ensures high quality and reliability for analytical, pharmaceutical, and industrial applications. It must be stored in a dry, cool environment away from acids and oxidizers and handled with appropriate personal protective equipment to avoid irritation.
Soluble Starch Powder Extra Pure
Soluble Starch Powder Extra Pure is a fine, white to off-white powder derived from natural starch. It dissolves readily in hot water forming viscous solutions and is widely used as a thickener, binder, and stabilizer in laboratory, pharmaceutical, and food industries. Its Extra Pure grade ensures high purity suitable for analytical and formulation purposes. It is also utilized as an indicator in iodine titrations and in microbiological media preparation. Proper storage in a dry, cool environment and handling with dust protection are recommended to maintain quality and safety.
