Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Emulsifying Wax Non ionic
Whatsapp Order
Emulsifying Wax Non ionic is a self-emulsifying, non-ionic wax blend composed primarily of fatty alcohols (typically cetostearyl alcohol or stearyl alcohol) and non-ionic surfactants like polyethylene glycol (PEG) derivatives. It is used to stabilize oil-in-water (O/W) emulsions without relying on ionic charges, making it highly compatible with a wide range of ingredients, including both cationic and anionic components. This wax is commonly found in white, odorless solid flakes or pellets and is dispersible in hot water to form smooth, stable emulsions. It is widely used in cosmetic, pharmaceutical, and industrial applications where gentle emulsification, stability, and broad pH compatibility are needed.
Description
Emulsifying Wax Non ionic
Primary Uses
- Cosmetics & Personal Care
- Creams and Lotions: Primary emulsifier in facial moisturizers, body butters, and anti-aging products, offering stability and smooth texture.
- Hair Conditioners and Leave-in Treatments: Provides mild emulsification and a soft, silky finish without interfering with conditioning agents.
- Sunscreens and BB Creams: Emulsifies UV filters and other actives in oil-in-water systems, helping achieve uniform application.
- Eye Creams and Serums: Suitable for sensitive formulations due to its non-ionic, low-irritant profile.
- Baby Care Products: Preferred in formulations for infants and sensitive skin due to its non-reactive, non-irritant nature.
- Makeup Products: Used in foundations, primers, and cream-based cosmetics for consistent emulsification and product feel.
- Pharmaceuticals
- Topical Creams and Ointments: Used in medicated bases such as antifungal creams, corticosteroids, and antibiotic ointments to ensure emulsion stability.
- Transdermal Systems: Aids in even dispersion of APIs (active pharmaceutical ingredients) in creams and gels for better skin absorption.
- Dermatological Preparations: Helps stabilize emulsions for treatments targeting eczema, dermatitis, and psoriasis.
- Suppositories and Semi-solid Bases: Used in non-aqueous emulsions and pharmaceutical creams requiring non-ionic compatibility.
- Household & Industrial Products
- Fabric Conditioners: Used in emulsifying fragrances and softening agents without disrupting ionic surfactants.
- Polishes and Waxes: Stabilizes emulsions in wood, leather, or car care products, where ionic surfactants may interfere with other actives.
- Surface Cleaners: Mild emulsifier in premium household cleaning sprays, especially for surfaces sensitive to high alkalinity.
- Textile Auxiliaries: Helps disperse oils and softeners uniformly in non-ionic textile finishing agents.
Secondary Uses
- Food Industry (if food-grade variant)
- Cream Fillings and Icings: Acts as a stabilizer and emulsifier in food emulsions (only if food-grade certified).
- Nutraceutical Creams or Supplements: Used in topical or semi-solid delivery systems of vitamins or herbal extracts.
- Paints, Coatings & Adhesives
- Emulsion Polymerization: Stabilizes monomer droplets in water-based polymer synthesis.
- Adhesive Formulations: Maintains uniformity and texture in non-aqueous and aqueous adhesive blends.
- Agriculture
- Pesticide Formulations: Used as an emulsifier and dispersant in agrochemical sprays where ionic surfactants may destabilize active ingredients.
- Fertilizer Blends: Emulsifies oils and vitamins in foliar sprays and micronutrient solutions.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Blend of non-ionic polyoxyethylene ethers and fatty alcohols
- Common/Trade Name: Emulsifying Wax – Non-Anionic
- CAS Number: Mixture (common components include CAS 67762-27-0 and CAS 9005-00-9)
- HS Code: 3402.13.00
- Molecular Formula: Variable depending on PEG and alcohol chain length
- Synonyms:
- Non-Ionic Emulsifying Wax
- PEG-fatty alcohol condensates
- Self-Emulsifying Wax
- Emulsifying Wax NF
- Cetearyl Alcohol and PEG derivatives
2. Physical & Chemical Properties
- Physical State: White to off-white solid flakes or pellets
- Odor: Odorless or faintly waxy
- Melting Point: 50–55°C
- pH (1% dispersion): 6.0–8.0 (neutral to mildly alkaline)
- Solubility: Dispersible in hot water; soluble in alcohols and glycols
- Stability: Stable under normal conditions; compatible with wide pH range (4–9)
- Cloud Point: Typically above 70°C
- Emulsion Type: Primarily oil-in-water (O/W)
3. Safety & Hazard Attributes
- Hazard Class (GHS): Not classified as hazardous
- Toxicity: Low; generally recognized as safe for topical use
- Exposure Limits: Not established
- Flammability: Non-flammable; may burn under high heat
4. Storage & Handling Attributes
- Storage Conditions: Store in cool, dry, well-ventilated area away from direct heat and moisture
- Container Type: Fiber drums with PE liners or HDPE bags
- Shelf Life: 24 months under appropriate conditions
- Handling Precautions: Avoid moisture contamination and excessive heat during storage
5. Regulatory & Compliance Attributes
- FDA Status: Approved for use in topical drug and cosmetic formulations (not approved for ingestion unless food-grade variant)
- USP/NF Grade: Available for pharmaceutical use
- REACH Registered: Yes
- RoHS/TSCA Status: Compliant in many regions
6. Environmental & Health Impact
- Biodegradability: Readily biodegradable
- Ecotoxicity: Low; safe for use in rinse-off products
- Bioaccumulation: Not expected
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic or mutagenic
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
PPE Required:
- Chemical-resistant gloves
- Safety goggles
- Protective apron or lab coat
- Dust mask or respirator if powder is airborne
Handling Guidelines:
- Use in a clean, ventilated workspace
- Avoid generating dust during transfer or mixing
- Add slowly into hot water under agitation to prevent clumping
- Avoid contact with eyes or prolonged skin exposure
Storage Measures:
- Keep containers tightly sealed when not in use
- Store away from oxidizing agents and moisture
- Protect from freezing or excessive heat
- Use dedicated, labeled storage containers
Hygiene Practices:
- Wash hands thoroughly after handling
- Do not eat, drink, or smoke during use
- Clean utensils and surfaces after processing
- Avoid contamination with other chemicals
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms occur
- Skin Contact: Wash with soap and water; consult physician if irritation develops
- Eye Contact: Flush eyes with water for at least 15 minutes; seek medical help if irritation persists
- Ingestion: Rinse mouth with water; not expected to be harmful in small quantities, but seek medical advice
Firefighting Measures
- Fire Hazards: Slightly combustible at high temperatures
- Extinguishing Media: Dry chemical, foam, carbon dioxide (CO₂), or water mist
- Special Precautions: Use self-contained breathing apparatus and protective gear in case of large fire
- Decomposition Products: May release carbon monoxide, carbon dioxide, and mild organic vapors
Related products
Amphoteric Surfactants
Amphoteric surfactants are unique surface-active agents that can act as either anionic or cationic surfactants depending on the pH of the solution. These molecules contain both acidic (carboxyl or sulfonic) and basic (amine or quaternary ammonium) functional groups, giving them high versatility, mildness, and compatibility with other surfactants. Amphoteric surfactants are widely used in personal care, household cleaning, industrial applications, pharmaceuticals, and specialty formulations where low irritation and effective cleansing are critical. Common examples include Cocamidopropyl Betaine and Lauryl Betaine.
Booster Emulsifier
Booster Emulsifier is a specialized surfactant-based additive formulated to enhance the stability, texture, and uniformity of emulsions in food, cosmetic, and pharmaceutical formulations. It acts by reducing surface tension between immiscible liquids such as oil and water, facilitating the formation of stable, homogeneous emulsions. Booster Emulsifier is valued for its ability to improve product appearance, extend shelf life, and enhance sensory properties such as mouthfeel and creaminess. It is typically available as a liquid or powder and compatible with a wide range of ingredients.
Cetomacrogel 1000BP
Cetomacrogel 1000BP is a high molecular weight polyethylene glycol (PEG) derivative, typically used as a thickening agent, emulsifier, and stabilizer in pharmaceutical and cosmetic formulations. It appears as a white to off-white, waxy solid or flakes with a neutral odor. Known for its excellent water solubility and compatibility with various ingredients, Cetomacrogel 1000BP enhances texture, viscosity, and stability in creams, ointments, and gels. It serves as a hydrophilic vehicle base in topical and oral pharmaceutical preparations and improves product spreadability and skin feel.
Cocamino Propyl Betaine Desmocol
Cocamino Propyl Betaine Desmocol is a mild amphoteric surfactant derived from coconut oil fatty acids and amino acids. It appears as a clear to slightly hazy liquid with a faint coconut-like odor. CAPB is widely used in personal care and household cleaning products for its excellent foaming, cleansing, and conditioning properties. Being a zwitterionic surfactant, it is compatible with anionic, cationic, and nonionic surfactants, enhancing the mildness and stability of formulations. The 30% active solution is easy to handle and incorporate in various cosmetic and detergent products. It functions as a foam booster, viscosity builder, and anti-irritant agent, making it a versatile ingredient in mild formulations.
Cocodiethanolamide (CDEA)
Cocodiethanolamide (CDEA) is a viscous, amber to dark brown liquid derived from the reaction of coconut oil fatty acids with diethanolamine. It is a non-ionic surfactant and foam stabilizer commonly used in personal care and cleaning products. CDEA enhances foam quality, viscosity, and skin conditioning properties in formulations. Due to its excellent emulsifying and thickening abilities, it is widely used as a secondary surfactant to boost the performance of primary detergents. It is valued for its biodegradability, mildness, and compatibility with various surfactants and other ingredients in cosmetics and industrial formulations.
Myristic Acid
Myristic Acid is a saturated fatty acid with a 14-carbon chain, naturally found in nutmeg, coconut oil, palm kernel oil, and butter fat. It appears as a white crystalline solid with a faint odor. It is widely used in the manufacture of soaps, cosmetics, surfactants, and food additives due to its emollient and cleansing properties. Myristic Acid acts as a key intermediate in the production of esters, detergents, and lubricants.
Polyglyceryl
Polyglyceryl refers to a family of non-ionic surfactants and emulsifiers made by the polymerization of glycerol units. Depending on the number of glycerol units (e.g., Polyglyceryl-2, -3, -6, -10) and fatty acid esterification (e.g., laurate, oleate, stearate), they offer different emulsifying and solubilizing properties. These compounds are biodegradable, mild, and skin-friendly, making them ideal for use in cosmetics, food, pharmaceuticals, and personal care products. Polyglyceryl esters are often chosen in natural and organic product formulations due to their origin and non-toxic profile.
Triethanolamine (TEA)
Triethanolamine (TEA) is a viscous, colorless to pale yellow liquid with a mild ammonia-like odor. It is a multifunctional organic compound widely used in cosmetics, pharmaceuticals, and industrial applications as a pH adjuster, emulsifier, surfactant, and corrosion inhibitor. Triethanolamine neutralizes fatty acids to form soaps and helps stabilize emulsions, making it essential in personal care formulations and various chemical manufacturing processes. Its versatility and compatibility with other ingredients make it a valuable additive in numerous industries.
