Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Emulsifying Wax Non ionic
Emulsifying Wax Non ionic is a self-emulsifying, non-ionic wax blend composed primarily of fatty alcohols (typically cetostearyl alcohol or stearyl alcohol) and non-ionic surfactants like polyethylene glycol (PEG) derivatives. It is used to stabilize oil-in-water (O/W) emulsions without relying on ionic charges, making it highly compatible with a wide range of ingredients, including both cationic and anionic components. This wax is commonly found in white, odorless solid flakes or pellets and is dispersible in hot water to form smooth, stable emulsions. It is widely used in cosmetic, pharmaceutical, and industrial applications where gentle emulsification, stability, and broad pH compatibility are needed.
Emulsifying Wax Non ionic
Primary Uses
- Cosmetics & Personal Care
- Creams and Lotions: Primary emulsifier in facial moisturizers, body butters, and anti-aging products, offering stability and smooth texture.
- Hair Conditioners and Leave-in Treatments: Provides mild emulsification and a soft, silky finish without interfering with conditioning agents.
- Sunscreens and BB Creams: Emulsifies UV filters and other actives in oil-in-water systems, helping achieve uniform application.
- Eye Creams and Serums: Suitable for sensitive formulations due to its non-ionic, low-irritant profile.
- Baby Care Products: Preferred in formulations for infants and sensitive skin due to its non-reactive, non-irritant nature.
- Makeup Products: Used in foundations, primers, and cream-based cosmetics for consistent emulsification and product feel.
- Pharmaceuticals
- Topical Creams and Ointments: Used in medicated bases such as antifungal creams, corticosteroids, and antibiotic ointments to ensure emulsion stability.
- Transdermal Systems: Aids in even dispersion of APIs (active pharmaceutical ingredients) in creams and gels for better skin absorption.
- Dermatological Preparations: Helps stabilize emulsions for treatments targeting eczema, dermatitis, and psoriasis.
- Suppositories and Semi-solid Bases: Used in non-aqueous emulsions and pharmaceutical creams requiring non-ionic compatibility.
- Household & Industrial Products
- Fabric Conditioners: Used in emulsifying fragrances and softening agents without disrupting ionic surfactants.
- Polishes and Waxes: Stabilizes emulsions in wood, leather, or car care products, where ionic surfactants may interfere with other actives.
- Surface Cleaners: Mild emulsifier in premium household cleaning sprays, especially for surfaces sensitive to high alkalinity.
- Textile Auxiliaries: Helps disperse oils and softeners uniformly in non-ionic textile finishing agents.
Secondary Uses
- Food Industry (if food-grade variant)
- Cream Fillings and Icings: Acts as a stabilizer and emulsifier in food emulsions (only if food-grade certified).
- Nutraceutical Creams or Supplements: Used in topical or semi-solid delivery systems of vitamins or herbal extracts.
- Paints, Coatings & Adhesives
- Emulsion Polymerization: Stabilizes monomer droplets in water-based polymer synthesis.
- Adhesive Formulations: Maintains uniformity and texture in non-aqueous and aqueous adhesive blends.
- Agriculture
- Pesticide Formulations: Used as an emulsifier and dispersant in agrochemical sprays where ionic surfactants may destabilize active ingredients.
- Fertilizer Blends: Emulsifies oils and vitamins in foliar sprays and micronutrient solutions.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Blend of non-ionic polyoxyethylene ethers and fatty alcohols
- Common/Trade Name: Emulsifying Wax – Non-Anionic
- CAS Number: Mixture (common components include CAS 67762-27-0 and CAS 9005-00-9)
- HS Code: 3402.13.00
- Molecular Formula: Variable depending on PEG and alcohol chain length
- Synonyms:
- Non-Ionic Emulsifying Wax
- PEG-fatty alcohol condensates
- Self-Emulsifying Wax
- Emulsifying Wax NF
- Cetearyl Alcohol and PEG derivatives
2. Physical & Chemical Properties
- Physical State: White to off-white solid flakes or pellets
- Odor: Odorless or faintly waxy
- Melting Point: 50–55°C
- pH (1% dispersion): 6.0–8.0 (neutral to mildly alkaline)
- Solubility: Dispersible in hot water; soluble in alcohols and glycols
- Stability: Stable under normal conditions; compatible with wide pH range (4–9)
- Cloud Point: Typically above 70°C
- Emulsion Type: Primarily oil-in-water (O/W)
3. Safety & Hazard Attributes
- Hazard Class (GHS): Not classified as hazardous
- Toxicity: Low; generally recognized as safe for topical use
- Exposure Limits: Not established
- Flammability: Non-flammable; may burn under high heat
4. Storage & Handling Attributes
- Storage Conditions: Store in cool, dry, well-ventilated area away from direct heat and moisture
- Container Type: Fiber drums with PE liners or HDPE bags
- Shelf Life: 24 months under appropriate conditions
- Handling Precautions: Avoid moisture contamination and excessive heat during storage
5. Regulatory & Compliance Attributes
- FDA Status: Approved for use in topical drug and cosmetic formulations (not approved for ingestion unless food-grade variant)
- USP/NF Grade: Available for pharmaceutical use
- REACH Registered: Yes
- RoHS/TSCA Status: Compliant in many regions
6. Environmental & Health Impact
- Biodegradability: Readily biodegradable
- Ecotoxicity: Low; safe for use in rinse-off products
- Bioaccumulation: Not expected
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic or mutagenic
Safety Handling Precautions
PPE Required:
- Chemical-resistant gloves
- Safety goggles
- Protective apron or lab coat
- Dust mask or respirator if powder is airborne
Handling Guidelines:
- Use in a clean, ventilated workspace
- Avoid generating dust during transfer or mixing
- Add slowly into hot water under agitation to prevent clumping
- Avoid contact with eyes or prolonged skin exposure
Storage Measures:
- Keep containers tightly sealed when not in use
- Store away from oxidizing agents and moisture
- Protect from freezing or excessive heat
- Use dedicated, labeled storage containers
Hygiene Practices:
- Wash hands thoroughly after handling
- Do not eat, drink, or smoke during use
- Clean utensils and surfaces after processing
- Avoid contamination with other chemicals
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms occur
- Skin Contact: Wash with soap and water; consult physician if irritation develops
- Eye Contact: Flush eyes with water for at least 15 minutes; seek medical help if irritation persists
- Ingestion: Rinse mouth with water; not expected to be harmful in small quantities, but seek medical advice
Firefighting Measures
- Fire Hazards: Slightly combustible at high temperatures
- Extinguishing Media: Dry chemical, foam, carbon dioxide (CO₂), or water mist
- Special Precautions: Use self-contained breathing apparatus and protective gear in case of large fire
- Decomposition Products: May release carbon monoxide, carbon dioxide, and mild organic vapors
Related products
Booster Emulsifier
Booster Emulsifier is a specialized surfactant-based additive formulated to enhance the stability, texture, and uniformity of emulsions in food, cosmetic, and pharmaceutical formulations. It acts by reducing surface tension between immiscible liquids such as oil and water, facilitating the formation of stable, homogeneous emulsions. Booster Emulsifier is valued for its ability to improve product appearance, extend shelf life, and enhance sensory properties such as mouthfeel and creaminess. It is typically available as a liquid or powder and compatible with a wide range of ingredients.
Centrimonium Chloride Solution
Centrimonium Chloride Solution (also known as Cetyltrimethylammonium Chloride), with the chemical formula C₁₉H₄₂ClN, is a quaternary ammonium compound presented here as a 30% aqueous solution. It is a cationic surfactant widely used as an antistatic agent, conditioner, and emulsifier in personal care and industrial applications. This 25kg packaged solution is highly soluble and stable, providing excellent conditioning and antimicrobial properties in hair care formulations, fabric softeners, and disinfectants.
Ceteareth 25 Ginonic
Ceteareth 25 Ginonic CSA 25 is a nonionic surfactant and emulsifier derived from the ethoxylation of cetearyl alcohol, incorporating approximately 20 ethylene oxide units per molecule. It appears as a white to off-white waxy solid or viscous liquid, depending on temperature and formulation. This emulsifier is widely used in cosmetic, pharmaceutical, and industrial formulations for its excellent ability to stabilize oil-in-water emulsions, improve texture, and enhance the sensory properties of finished products. Its high hydrophilic-lipophilic balance (HLB) makes it especially effective in forming stable emulsions and solubilizing lipophilic ingredients in aqueous phases. Ceteareth 20 is valued for its mildness, broad compatibility, and multifunctional performance.
Cetomacrogol PEG1000 (Ginonic CSA 20)
Cetomacrogol PEG (Ginonic CSA) is a polyethylene glycol-based nonionic surfactant and emulsifier with an average molecular weight of approximately 1000 Da. It appears as a white to off-white waxy solid or flakes with a neutral odor. This high-quality grade is widely used in cosmetic, pharmaceutical, and personal care formulations due to its excellent emulsifying, solubilizing, and moisturizing properties. Cetomacrogol PEG1000 (Ginonic CSA 20) facilitates stable oil-in-water emulsions, improves product texture and skin feel, and enhances the bioavailability of active ingredients. Its hydrophilic nature and compatibility with a wide range of ingredients make it a versatile additive in creams, lotions, ointments, and topical gels.
Cetyl Trimethyl Ammonium Chloride
Cetyl Trimethyl Ammonium Chloride (CTAC) is a cationic surfactant and quaternary ammonium compound characterized by a long hydrophobic cetyl (C16) alkyl chain and a positively charged ammonium head group. It appears as a white to pale yellow powder or flakes, soluble in water, and exhibits strong surface-active properties. CTAC is widely used in cosmetics, personal care, and industrial applications for its excellent conditioning, antistatic, emulsifying, and disinfectant capabilities. It functions primarily as a fabric softener, hair conditioner, and antimicrobial agent.
Cocodiethanolamide (CDEA)
Cocodiethanolamide (CDEA) is a viscous, amber to dark brown liquid derived from the reaction of coconut oil fatty acids with diethanolamine. It is a non-ionic surfactant and foam stabilizer commonly used in personal care and cleaning products. CDEA enhances foam quality, viscosity, and skin conditioning properties in formulations. Due to its excellent emulsifying and thickening abilities, it is widely used as a secondary surfactant to boost the performance of primary detergents. It is valued for its biodegradability, mildness, and compatibility with various surfactants and other ingredients in cosmetics and industrial formulations.
Emulsifier ( Emulgator) NP-9
Emulsifier ( Emulgator) NP-9 is a nonionic surfactant belonging to the family of Nonylphenol Ethoxylates (NPEs), specifically with an average of 9 ethylene oxide (EO) units. It is widely used as an effective emulsifying, wetting, dispersing, and solubilizing agent. NP-9 is typically a pale yellow to amber viscous liquid, soluble in water and various organic solvents. It is valued for its strong emulsifying ability to stabilize oil-in-water (O/W) and water-in-oil (W/O) emulsions, excellent detergency, and good compatibility with other surfactants and formulation ingredients. NP-9 is commonly employed in industrial, agricultural, cosmetic, pharmaceutical, and cleaning applications.
Emulsifying Wax Anionic
Emulsifying Wax Anionic is a versatile surfactant blend composed primarily of fatty alcohols (such as cetyl or stearyl alcohol) and anionic surfactants like sodium lauryl sulfate. It is designed to stabilize oil-in-water (O/W) emulsions by reducing interfacial tension between water and oil phases. It appears as white to off-white solid flakes or pellets, with a mild fatty odor and is dispersible in water with agitation and mild heat. Known for its excellent emulsification, cleansing, and thickening properties, this emulsifying wax is widely used in cosmetics, pharmaceuticals, household cleaners, and industrial applications.
