Acidulants
Antioxidants
Nutraceutical Ingredients (food)
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Chromatography Chemicals
Spectroscopy Reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
HDPE Injection
Whatsapp Order
HDPE Injection is a high-density polyethylene resin specially formulated for injection molding processes. This grade exhibits excellent flow characteristics with moderate melt flow index optimized for producing precise, high-strength molded parts with superior surface finish. It combines good impact resistance, stiffness, and chemical resistance with excellent dimensional stability. The resin ensures reliable processing performance across a broad temperature range and is suitable for complex, detailed, or large injection-molded components. It is supplied as uniform granules designed for smooth melting and consistent molding cycles.
Description
HDPE Injection
Primary UsesÂ
- Injection Molding Applications
- Production of automotive components such as interior panels, caps, covers, and fuel system parts requiring chemical resistance and toughness.
- Manufacturing consumer goods including household containers, lids, toys, and durable plastic parts with high mechanical strength.
- Used extensively for industrial parts like gears, housings, electrical enclosures, and machine components demanding dimensional precision and durability.
- Fabrication of medical device components where chemical inertness and cleanliness are necessary (subject to certification).
- Production of packaging closures and caps with excellent sealing properties and toughness.
- Electrical & Electronics Industry
- Used for electrical connectors, insulators, and housings that require dielectric properties and impact resistance.
- Components for cable conduits and protective covers.
- Construction & Infrastructure
- Fabrication of plumbing fittings, valve bodies, and pipe components resistant to corrosion and environmental stress.
- Production of fixtures and fasteners requiring high mechanical strength and environmental resistance.
Secondary UsesÂ
- Household & Office Products
- Items like storage bins, drawer components, and office equipment parts.
- Fabrication of toys and recreational equipment requiring safety and durability.
- Packaging Industry
- Manufacturing of heavy-duty containers and crates with impact resistance and chemical durability.
- Agricultural Applications
- Components for irrigation systems, plant pots, and equipment parts requiring UV resistance and toughness.
- Recycling and Sustainability
- This resin grade is recyclable and can be repurposed into injection molded products of similar or lower specifications, supporting circular economy initiatives.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Polyethylene, high-density (HDPE)
- Common/Trade Name: HDPE Injection HMA035/3255
- CAS Number: 9002-88-4
- HS Code: 3901.20.00
- Polymer Type: High-density polyethylene (HDPE) injection molding grade
- Synonyms: HDPE Injection Grade; HDPE molding resin
- Physical & Chemical Properties
- Physical State: Pellet resin
- Color & Odor: Natural/translucent; odorless
- Density: ~0.945 g/cm³
- Melt Flow Index (MFI): Approx. 3.5 g/10 min (typical for HMA035 grade)
- Melting Point: Approx. 130°C
- Tensile Strength: High, generally 20–30 MPa
- Impact Strength: Excellent impact resistance at room temperature
- Environmental Stress Crack Resistance: Good
- Chemical Resistance: Resistant to acids, bases, alcohols, and hydrocarbons
- Thermal Stability: Suitable for molding temperatures between 190–260°C
- Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: Non-toxic, suitable for food contact (batch certification required)
- Handling: Non-irritant under normal handling conditions
- Storage & Handling Attributes
- Container Type: Supplied in moisture-proof bags or bulk containers
- Storage Conditions: Store in dry, cool places away from direct sunlight
- Shelf Life: Up to 2 years if stored properly
- Handling Notes: Minimize dust generation; use PPE when handling bulk
- Regulatory & Compliance Attributes
- Compliant with FDA and EFSA regulations for food contact use (subject to certification)
- REACH and RoHS compliant
- Meets ASTM and ISO standards for injection molding resins
- Environmental & Health Impact
- Biodegradability: Non-biodegradable but recyclable
- Recycling: Accepted in plastic recycling streams; can be reprocessed for injection molding or other polymer uses
- Ecotoxicity: Low, inert polymer
- Carcinogenicity/Mutagenicity: Not classified
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Protective gloves, goggles, dust masks when handling dry pellets
- Handling Guidelines: Use in well-ventilated areas; avoid dust inhalation
- Hygiene Practices: Wash hands after handling; avoid ingestion and eye contact
- First Aid Measures
- Inhalation: Move to fresh air if irritation develops
- Skin Contact: Wash with soap and water
- Eye Contact: Rinse thoroughly with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Not harmful in small amounts; seek medical advice if large quantities ingested
- Firefighting Measures
- Fire Hazards: Combustible solid; emits dense smoke and toxic gases such as carbon monoxide and carbon dioxide when burned
- Extinguishing Media: Water spray, foam, dry chemical, COâ‚‚
- Combustion Products: Carbon oxides and hydrocarbons
- Firefighter PPE: Use self-contained breathing apparatus and full protective gear
Related products
Emulsifier (Emulgator)
Emulsifier is a nonionic surfactant belonging to the family of Nonylphenol Ethoxylates (NPEs), specifically with an average of 9 ethylene oxide (EO) units. It is widely used as an effective emulsifying, wetting, dispersing, and solubilizing agent. NP-9 is typically a pale yellow to amber viscous liquid, soluble in water and various organic solvents. It is valued for its strong emulsifying ability to stabilize oil-in-water (O/W) and water-in-oil (W/O) emulsions, excellent detergency, and good compatibility with other surfactants and formulation ingredients. NP-9 is commonly employed in industrial, agricultural, cosmetic, pharmaceutical, and cleaning applications.
Epikote 828 (Epoxy Resin)
Epikote 828 is a liquid bisphenol-A-based epoxy resin with a low molecular weight. It is one of the most widely used general-purpose epoxy resins in industrial applications due to its excellent mechanical, chemical, and thermal properties. Epikote 828 cures with various hardeners, especially amines, to form thermoset polymers with outstanding adhesion, chemical resistance, and dimensional stability. The resin is typically a clear to pale yellow viscous liquid and is soluble in most organic solvents. It is primarily used in coatings, adhesives, composites, electrical encapsulation, flooring systems, and structural materials.
Isophorone
Isophorone is a colorless to pale yellow liquid with a pungent, ketone-like odor. Chemically classified as a cyclic α,β-unsaturated ketone (3,5,5-trimethyl-2-cyclohexen-1-one), it is a solvent widely used in industrial applications. It has good solvency properties for resins, paints, coatings, and inks, combined with relatively slow evaporation compared to other ketones. Isophorone is miscible with many organic solvents and used extensively in manufacturing and chemical synthesis.
Isopropyl Myristate IPM
Isopropyl Myristate IPM is a clear, colorless, and oily liquid ester formed by the reaction of isopropyl alcohol and myristic acid. It has a mild, pleasant odor and excellent spreading properties. IPM is widely used in cosmetics, pharmaceuticals, and industrial applications as an emollient, solvent, and penetration enhancer due to its ability to improve texture and absorption of topical formulations.
LLDPE injection 6201XR
LLDPE injection 6201XR is a linear low-density polyethylene resin specially formulated for injection molding applications. It offers excellent processability, high impact strength, and good flexibility. The material provides a balance of mechanical performance and ease of molding, making it ideal for producing thin-walled and complex-shaped parts. With superior clarity and toughness, LLDPE Injection 6201XR is widely used in manufacturing durable consumer goods, automotive components, and packaging items.
PVC Resin 701
PVC Resin 701 is a high-quality suspension-grade polyvinyl chloride resin with a K-value of approximately 70–71, indicating high molecular weight. It is widely used in the production of flexible PVC products where excellent strength, elongation, and plasticizer absorption are required. PVC Resin 701 offers superior mechanical properties, high thermal stability, and good compatibility with plasticizers, making it suitable for calendaring, extrusion, and molding applications in diverse industries.
Sasol Phenol
Sasol Phenol is a high-purity, industrial-grade phenol produced by Sasol, widely used as a key raw material in the manufacture of plastics, resins, and chemicals. Phenol is an aromatic organic compound characterized by a hydroxyl group (-OH) attached to a benzene ring. It serves as a precursor in producing bisphenol A, caprolactam, and phenolic resins. Sasol Phenol is known for its consistent quality, purity, and suitability for diverse industrial applications including chemical synthesis, pharmaceuticals, and adhesives.
Styrene Polymer Copolymer (230kg)
Styrene Polymer Copolymer is a high-performance copolymer consisting primarily of styrene combined with other monomers such as acrylonitrile or butadiene, designed to offer enhanced mechanical properties, chemical resistance, and processability. Supplied in bulk packaging of 230kg, it is widely used in plastics, adhesives, coatings, and rubber industries. This copolymer provides excellent toughness, thermal stability, and versatility, making it suitable for demanding industrial applications.
