Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
HDPE Pipe HS CRP
Whatsapp Order
HDPE Pipe HS CRP is a high-density polyethylene (HDPE) pipe grade resin specially designed for the manufacture of high-performance pressure pipes. This grade corresponds to PE 100 classification, meaning it has enhanced strength and durability characteristics suitable for high-pressure applications. The resin exhibits excellent resistance to slow crack growth, outstanding chemical resistance, and superior impact strength even at low temperatures. HDPE PE 100 pipe is widely used in demanding infrastructure, water supply, gas distribution, and industrial piping systems due to its long service life, flexibility, and corrosion resistance.
Description
HDPE Pipe HS CRP
Primary Uses
- Water Supply and Distribution
- Manufacturing of potable water pipelines with excellent resistance to internal pressure and external loads.
- Used in drinking water distribution networks due to its non-toxic and corrosion-free properties.
- Employed in irrigation systems for agriculture requiring durable and flexible piping.
- Gas Distribution
- Fabrication of natural gas and LPG distribution pipelines meeting stringent safety and pressure requirements.
- Suitable for underground gas piping systems due to its leak-proof and corrosion-resistant nature.
- Sewage and Wastewater Systems
- Used for sewage and drainage piping where chemical resistance and impact toughness are essential.
- Applied in stormwater drainage systems to withstand harsh environmental conditions.
- Industrial Applications
- Employed in chemical transport pipelines resistant to a wide range of corrosive fluids.
- Suitable for industrial process piping in sectors like mining, manufacturing, and food processing.
- Infrastructure and Construction
- Utilized in district heating and cooling systems requiring high pressure and temperature resistance.
- Used in cable ducting and conduit applications protecting electrical and communication cables.
Secondary Uses
- Marine and Offshore
- Used for submarine pipelines and underwater cable protection requiring resistance to saltwater corrosion.
- Renewable Energy
- Applied in geothermal and solar thermal systems piping where chemical and temperature resistance is needed.
- Compressed Air Systems
- Fabrication of compressed air piping in industrial settings requiring pressure resistance and durability.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Polyethylene, high-density (HDPE)
- Common/Trade Name: HDPE Pipe HS CRP 100-PE 100
- CAS Number: 9002-88-4
- HS Code: 3901.20.00
- Polymer Type: High-density polyethylene, PE 100 pipe grade
- Synonyms: PE 100 HDPE Pipe Resin; High Strength HDPE for pipes
- Physical & Chemical Properties
- Physical State: Pellet resin for pipe extrusion
- Color & Odor: Natural/translucent or black (carbon black compounded); odorless
- Density: ~0.955 g/cm³ (carbon black grade)
- Melt Flow Index (MFI): Approx. 0.25–0.40 g/10 min (depending on specific grade)
- Melting Point: Approx. 130°C
- Tensile Strength: Very high, typically >30 MPa
- Environmental Stress Crack Resistance: Excellent, suitable for long-term pressure use
- Chemical Resistance: Resistant to acids, bases, solvents, and hydrocarbons
- Thermal Stability: Suitable for continuous use at temperatures up to 60°C (PE 100)
- Safety & Hazard Attributes
- GHS Classification: Not hazardous
- Toxicity: Non-toxic, suitable for potable water contact (subject to certification)
- Handling: Non-irritant under normal conditions
- Storage & Handling Attributes
- Container Type: Supplied in bags or bulk containers
- Storage Conditions: Store in cool, dry areas protected from UV radiation
- Shelf Life: Up to 2 years under proper storage
- Handling Notes: Avoid moisture and contamination; use gloves and dust masks if needed
- Regulatory & Compliance Attributes
- Compliant with ISO 4427, ASTM F714, and EN 12201 standards for PE pipe materials
- Certified for potable water applications by NSF/ANSI 61, WRAS, or equivalent (subject to certification)
- REACH and RoHS compliant
- Environmental & Health Impact
- Biodegradability: Non-biodegradable but recyclable
- Recycling: Accepted in PE pipe recycling streams
- Ecotoxicity: Low; inert polymer
- Carcinogenicity/Mutagenicity: Not classified
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Gloves, safety goggles, and dust mask during handling of resin pellets
- Handling Guidelines: Use in well-ventilated areas; avoid inhalation of dust
- Hygiene Practices: Wash hands thoroughly after handling
- First Aid Measures
- Inhalation: Remove to fresh air if irritation occurs
- Skin Contact: Wash skin with soap and water
- Eye Contact: Flush eyes with plenty of water for at least 15 minutes; seek medical attention if irritation persists
- Ingestion: Not expected to be harmful; seek medical advice if large amounts ingested
- Firefighting Measures
- Fire Hazards: Combustible polymer; produces dense smoke and toxic gases (carbon monoxide, carbon dioxide) on burning
- Extinguishing Media: Water spray, foam, dry chemical, or CO₂
- Combustion Products: Carbon oxides, hydrocarbons
- Firefighter PPE: Use self-contained breathing apparatus and full protective clothing
Related products
Diethyl Phthalate
Diethyl Phthalate is a high-purity, colorless, oily liquid with a faint, sweet aromatic odor. With a minimum of 99% active content, DEP 99% is a trusted solvent and plasticizer that offers excellent stability, low volatility, and high compatibility with a wide range of organic and polymeric materials. It is widely used in the cosmetic, pharmaceutical, plastics, coatings, and fragrance industries where purity is critical for both performance and safety. Its mild toxicological profile and solvency characteristics make it a versatile component in numerous sensitive and industrial applications.
HDPE Injection
HDPE Injection is a high-density polyethylene resin specially formulated for injection molding processes. This grade exhibits excellent flow characteristics with moderate melt flow index optimized for producing precise, high-strength molded parts with superior surface finish. It combines good impact resistance, stiffness, and chemical resistance with excellent dimensional stability. The resin ensures reliable processing performance across a broad temperature range and is suitable for complex, detailed, or large injection-molded components. It is supplied as uniform granules designed for smooth melting and consistent molding cycles.
Isopropyl Myristate
Isopropyl Myristate is a clear, colorless, and oily liquid ester formed by the reaction of isopropyl alcohol and myristic acid. It has a mild, pleasant odor and excellent spreading properties. IPM is widely used in cosmetics, pharmaceuticals, and industrial applications as an emollient, solvent, and penetration enhancer due to its ability to improve texture and absorption of topical formulations.
LLDPE film Opalene F20015
LLDPE film Opalene F20015 is a high-quality linear low-density polyethylene (LLDPE) film known for its excellent clarity, toughness, and flexibility. It is produced using linear low-density polyethylene resin, offering superior mechanical properties and puncture resistance compared to conventional low-density polyethylene films. Opalene F20015 is widely used in packaging applications where strength, transparency, and sealability are critical. Its balanced properties make it suitable for various industrial and consumer packaging needs.
N-Butanol
N-Butanol (1-butanol) is a four-carbon linear alcohol with the chemical formula C₄H₉OH. It is a colorless, flammable liquid with a mild, alcoholic odor. N-Butanol is widely used as a solvent in paints, coatings, adhesives, and chemical synthesis. It serves as an intermediate in the manufacture of plasticizers, butyl acrylate, and other chemicals. Its moderate volatility and solvent properties make it valuable in industrial and commercial applications.
Parallizer (UFABLEND)
Product Description
Parallizer (UFABLEND) is a versatile liquid paralytic agent used primarily in the formulation of pesticides and herbicides to enhance the immobilization of target pests. It acts by disrupting the nervous system of insects and other pests, providing quick knockdown effects. UFABLEND is valued for its fast action, compatibility with other agrochemicals, and stability under various environmental conditions.
PVC PE Wax
PVC PE Wax is a polyethylene-based wax additive used in PVC formulations to improve processing, lubrication, and surface finish. It serves as an internal and external lubricant in both rigid and flexible PVC products, enhancing extrusion, molding, and calendaring operations. It also contributes to better dispersion of fillers and pigments, reduced friction, and improved thermal stability. PE Wax for PVC is available in powder, flake, or granule form and is valued for its compatibility, thermal resistance, and cost-effectiveness.
Stabilizer
Stabilizers are additives used to maintain the physical and chemical properties of materials, preventing degradation caused by heat, light, oxygen, or mechanical stress. This product typically includes compounds like calcium stearate, magnesium stearate, or complex blends tailored for polymers, foods, cosmetics, or pharmaceuticals. They improve durability, shelf life, and performance of various formulations.
