Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Medium Oil (45/55)
Medium Oil (45/55) is a petroleum-derived mineral oil that falls within the mid-range viscosity category, typically comprising a blend of 45% light and 55% heavy paraffinic fractions. Known for its excellent solvency, thermal stability, and lubrication properties, Medium Oil is widely used in rubber processing, industrial applications, and chemical blending. It appears as a clear to pale amber liquid with a neutral odor, and it demonstrates good compatibility with various elastomers and polymers. This oil enhances the flexibility, softness, and processing efficiency of rubber compounds while maintaining stability under heat and mechanical stress.
Supplied in 180 kg industrial-grade drums, Medium Oil (45/55) is ideal for large-scale use in manufacturing and processing environments.
Medium Oil (45/55)
Primary Uses
- Rubber Processing & Plastics
- Used as a plasticizer and softening agent in SBR, EPDM, and natural rubber compounds.
- Enhances the elasticity and flow properties of molded and extruded rubber products.
- Applied in tire and tube manufacturing to improve processability and filler dispersion.
- Used in thermoplastic elastomers (TPE) to enhance flexibility and reduce hardness.
- Functions as a carrier oil for rubber chemicals and curatives.
- Industrial Lubrication & Manufacturing
- Employed as a base oil in industrial lubricants and metalworking fluids.
- Used as a mold release agent in foundry and plastic molding applications.
- Acts as a processing oil in adhesives, sealants, and caulking compounds.
- Applied in textile lubricants for fiber processing and spinning.
- Used in cable compounds and wire insulation manufacturing.
Secondary Uses
- Construction and Building Materials
- Incorporated in bitumen-based waterproofing and damp-proofing systems.
- Used in sealants and mastics for road construction and industrial flooring.
- Enhances workability of concrete additives and curing compounds.
- Other Industrial Applications
- Serves as a carrier for defoamers and emulsifiers in specialty chemical formulations.
- Used in printing inks, coatings, and synthetic waxes.
- Acts as a diluent and blending component in various solvent-based products.
1. Basic Identification Attributes
-
Chemical Type: Medium Oil Alkyd Resin
-
Common/Trade Name: Medium Oil (45/55) Alkyd
-
Composition: 45% Phthalic Anhydride, 55% Fatty Acids
-
CAS Number: 63148-69-6
-
HS Code: 3907.99
-
Synonyms: Medium Oil Alkyd Resin, Universal Alkyd Resin
2. Physical & Chemical Properties
-
Physical State: Viscous liquid
-
Color & Odor: Amber colored; characteristic resinous odor
-
Solubility: Soluble in mineral spirits, aromatic solvents
-
Viscosity: 8,000-15,000 mPa·s at 25°C
-
Main Components: Modified polyester resin, vegetable oil derivatives
3. Safety & Hazard Attributes
-
GHS Classification: Flammable liquid; may cause skin and eye irritation
-
Toxicity: Low acute toxicity; contains organic solvents
-
Exposure Limits: Follow solvent exposure limits for hydrocarbon mixtures
4. Storage & Handling Attributes
-
Storage Conditions: Store in cool, well-ventilated area away from heat sources
-
Container Type: 180 kg steel drums
-
Shelf Life: 24 months in sealed containers
-
Handling Precautions: Use proper grounding; avoid contact with strong oxidizers
5. Regulatory & Compliance Attributes
-
Complies with industry standards for alkyd resin specifications
-
Meets relevant safety standards for solvent-based products
-
Suitable for industrial coating formulations
6. Environmental & Health Impact
-
Biodegradability: Slow biodegradation
-
Ecotoxicity: Moderate impact due to solvent content
-
Bioaccumulation: Not expected for resin component
Safety Handling Precautions
-
PPE Required: Chemical-resistant gloves, safety glasses, organic vapor respirator
-
Handling Guidelines: Use in well-ventilated areas; avoid skin contact and breathing vapors
First Aid Measures
-
Inhalation: Move to fresh air; seek medical attention if symptoms persist
-
Skin Contact: Wash thoroughly with soap and water; remove contaminated clothing
-
Eye Contact: Rinse cautiously with water for several minutes; seek medical attention
-
Ingestion: Do not induce vomiting; seek immediate medical care
Firefighting Measures
-
Fire Hazards: Combustible liquid; vapors may explode if ignited
-
Extinguishing Media: Foam, CO₂, dry chemical powder
-
Special Precautions: Use water spray to cool exposed containers
Related products
Beeswax
Beeswax is a natural wax produced by honeybees of the genus Apis. It is secreted by worker bees from specialized glands and used to build honeycomb cells. Beeswax is a complex mixture of esters, fatty acids, and hydrocarbons, characterized by a pale yellow to brown color, a pleasant honey-like aroma, and a firm yet pliable texture. It has excellent emulsifying, binding, and protective properties, making it widely used in cosmetics, pharmaceuticals, food, and industrial applications. Beeswax is prized for its natural origin, biodegradability, and skin-friendly characteristics.
Eagle Styrene Acrylic 72/ 50
Eagle Styrene Acrylic 72/ 50 is a co-polymer emulsion consisting of styrene and acrylic monomers, offered at 50% active solids concentration in water. It appears as a milky-white, low-viscosity liquid with a mild odor. This polymer emulsion combines excellent film-forming properties, adhesion, and mechanical strength, making it widely used in coatings, adhesives, sealants, and functional binders across multiple industries.
Eagle Vam Veo( VV50/55)
Eagle VAM VEO VV50/55 is a water-based vinyl‑acetate–ethylene (VAM‑VEO) copolymer emulsion, formulated at 55% active solids. It presents as a milky-white, medium-viscosity liquid with a mild emulsion odor. This copolymer combines excellent film formation, adhesion, flexibility, and toughness, tailored for use in coatings, adhesives, sealants, and functional binders across multiple industries.
Epikote 828 (Epoxy Resin)
Epikote 828 (Epoxy Resin) is a liquid bisphenol-A-based epoxy resin with a low molecular weight. It is one of the most widely used general-purpose epoxy resins in industrial applications due to its excellent mechanical, chemical, and thermal properties. Epikote 828 cures with various hardeners, especially amines, to form thermoset polymers with outstanding adhesion, chemical resistance, and dimensional stability. The resin is typically a clear to pale yellow viscous liquid and is soluble in most organic solvents. It is primarily used in coatings, adhesives, composites, electrical encapsulation, flooring systems, and structural materials.
Petroleum Resin C9 Hydrocarbon
Petroleum Resin C9 Hydrocarbon is a thermoplastic hydrocarbon resin derived from the C9 fraction of petroleum cracking. It is a tackifying resin with excellent compatibility with various polymers, especially in adhesives, paints, rubber, and coatings industries. Known for its good color stability, fast curing, and strong adhesion properties, C9 Petroleum Resin enhances product performance in many industrial applications.
Short Oil Fast Drying (16/50) (SDA)
Short Oil Fast Drying (16/50) (SDA) Stand & Detail Alkyd (SDA) is a specially formulated alkyd resin designed for rapid drying and excellent film formation in coatings. It contains approximately 16% oil length, offering a balance between hardness and flexibility, and 50% solids content, which aids in build and coverage. This resin is widely used in industrial and decorative paints where quick drying and good adhesion are critical. Its fast curing properties make it ideal for applications requiring reduced downtime and enhanced productivity.
Styrene Acrylic
Styrene Acrylic is a copolymer emulsion combining styrene and acrylic monomers, widely used as a versatile binder in coatings, adhesives, and construction materials. It offers excellent film-forming properties, adhesion, water resistance, and durability. This product enhances the performance and longevity of paints, sealants, textiles, and paper coatings, with flexibility for both indoor and outdoor applications. Styrene Acrylic emulsions are designed to meet stringent industrial and environmental standards.
Styrene Acrylic Emulsion Polymer
Styrene Acrylic Emulsion Polymer is a water-based copolymer emulsion combining styrene and acrylic monomers, designed as a versatile binder with excellent film formation, adhesion, and durability. Widely used across paints, coatings, adhesives, textiles, and construction materials, this polymer offers superior weather resistance, water repellency, and flexibility. Its emulsified form enables easy incorporation into aqueous formulations, delivering enhanced performance and environmental benefits by reducing VOC emissions.
