Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Talcum Powder (Talc)
Original price was: $ 0.90.$ 0.77Current price is: $ 0.77.
Talcum Powder is a naturally occurring mineral composed primarily of hydrated magnesium silicate. It is known for its softness, absorbency, and lubricating properties. Talc is widely used in cosmetic, pharmaceutical, industrial, and consumer products due to its ability to absorb moisture, improve texture, and provide a smooth, silky feel. The powder form allows easy dispersion and application across diverse sectors.
Talcum Powder (Talc)
Primary Uses
- Cosmetics & Personal Care
- Body Powder: Used in talcum powders, baby powders, and deodorants for moisture absorption and skin soothing.
- Makeup & Foundation: Functions as a filler and texture enhancer in various makeup products.
- Pharmaceuticals
- Tablet & Pill Manufacturing: Acts as a glidant and anti-caking agent to improve powder flow and prevent clumping during production.
- Topical Applications: Used in medicated powders for skin conditions.
- Industrial Applications
- Plastics & Rubber: Serves as a filler to improve processing and mechanical properties.
- Paints & Coatings: Provides smoothness, improves opacity, and acts as a matting agent.
- Paper Industry: Enhances paper gloss, brightness, and printability.
Secondary Uses
- Ceramics
- Fluxing Agent: Used to improve the firing characteristics and finish of ceramic products.
- Agriculture
- Insecticide Carrier: Acts as a carrier and anti-caking agent in pesticide formulations.
- Food Industry
- Anti-caking Agent: Used in powdered food products to prevent clumping (food-grade talc only).
| PACK SIZE | 50kg |
|---|
1. Basic Identification Attributes
- Chemical Name (IUPAC): Hydrated magnesium silicate
- Common/Trade Name: Talcum Powder, Talc
- CAS Number: 14807-96-6
- HS Code: 2526.20.00
- Synonyms: Talcum, talc powder, soapstone
2. Physical & Chemical Properties
- Physical State: Fine, soft powder
- Color & Odor: White to off-white; odorless
- Melting Point: Approx. 1500 °C (decomposes)
- Solubility: Insoluble in water and organic solvents
- Density: Approx. 2.58 g/cm³
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous; respirable talc dust may cause respiratory issues
- Toxicity: Generally low; prolonged inhalation of fine dust should be avoided
- Exposure Limits: Follow occupational exposure limits for respirable dust (e.g., OSHA PEL: 2 mg/m³)
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry, dust-free environment
- Container Type: Bags, drums, or bulk containers
- Shelf Life: Indefinite if stored properly
- Handling Precautions: Minimize dust generation; use appropriate PPE
5. Regulatory & Compliance Attributes
- Complies with cosmetic and pharmaceutical regulations where applicable
- Food-grade talc meets FDA and Codex Alimentarius standards
- Manufactured under GMP conditions for applicable uses
- Meets safety and environmental regulations (REACH, OSHA, GHS)
6. Environmental & Health Impact
- Biodegradability: Inert mineral; not biodegradable
- Ecotoxicity: Low environmental impact; avoid release of fine dust in air or water
- Bioaccumulation: Not applicable
Safety Handling Precautions
- PPE Required: Use dust mask or respirator, gloves, and eye protection when handling powders
- Handling Guidelines: Work in well-ventilated areas to reduce dust exposure
- Storage Measures: Keep containers tightly closed and dry
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if breathing difficulty occurs
- Skin Contact: Wash with soap and water if irritation occurs
- Eye Contact: Rinse eyes with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Rinse mouth; seek medical advice if symptoms occur
Firefighting Measures
- Fire Hazards: Non-flammable; dust may pose explosion risk in confined spaces
- Extinguishing Media: Use water spray, foam, or dry chemical extinguishers as appropriate
- Hazardous Combustion Products: None
Related products
Calcined Kaolin
Calcined Kaolin is a fine, white to off-white powder produced by heating natural kaolin clay to high temperatures (typically between 600°C and 900°C) in a controlled process called calcination. This thermal treatment removes chemically bound water, changes the crystalline structure, and enhances the physical and chemical properties of kaolin. The resulting product exhibits increased brightness, hardness, and opacity, making it highly valuable as a functional additive and filler in numerous industrial applications. Calcined Kaolin is widely used in coatings, ceramics, plastics, rubber, paper, and paint industries to improve durability, brightness, and performance.
Calcium Carbonate Light
Calcium Carbonate Light is a finely ground, low bulk density natural mineral composed primarily of calcium carbonate (CaCO₃). Compared to standard grades, it has a lower density and larger particle size distribution, making it suitable for applications where light weight and high brightness are important. This form is extensively used as a filler and extender in industries such as plastics, paints, rubber, paper, adhesives, and construction materials to improve opacity, brightness, and texture, while maintaining low weight and cost efficiency. Its chemical inertness and whiteness provide functional and aesthetic advantages across formulations.
Calcium Sulphate
 Calcium Sulphate is an inorganic compound composed of calcium, sulfur, and oxygen, commonly found in two forms: dihydrate (gypsum, CaSO4·2H2O) and anhydrous (CaSO4). It appears as a white or off-white crystalline powder or granules with low solubility in water. Calcium Sulphate is widely used in construction, agriculture, pharmaceuticals, food industry, and various industrial applications. It acts as a filler, hardening agent, and drying agent due to its physical and chemical properties. The dihydrate form (gypsum) is notable for use in plaster and cement, while the anhydrous form is often used as a drying agent and in refractory materials.
Master Fibre
 Master Fibre is a high-quality synthetic fiber additive designed to reinforce concrete and mortar mixtures. It improves structural integrity by enhancing tensile strength, reducing cracking, and increasing durability. The fibers disperse uniformly within the mix, providing better load distribution and impact resistance in industrial, commercial, and residential construction applications. Master Fibre enhances performance without compromising workability, making it ideal for use in concrete slabs, pavements, beams, and repair mortars.
Polywhite B
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
Silicon Dioxide
Silicon Dioxide (SiO₂), commonly known as silica, is a naturally occurring inorganic compound found abundantly in the Earth’s crust. In its refined, powdered form, it is used as an anti-caking agent, filler, absorbent, and thickener across a wide range of industries. It is odorless, tasteless, chemically inert, and stable under normal conditions. Packaged in 10kg units, silicon dioxide is highly versatile and widely accepted for use in food, pharmaceutical, cosmetic, and industrial applications.
Sodium Sulphate Anhydrous
Sodium Sulphate Anhydrous (Naâ‚‚SOâ‚„) is a white crystalline powder, odorless and highly soluble in water. Unlike the decahydrate form (Glauber's salt), this anhydrous grade contains minimal water content, making it ideal for industrial applications requiring low moisture levels. Supplied in 25kg packaging, it is widely used as a filler, drying agent, and raw material in detergents, glass manufacturing, pulp and paper, and chemical synthesis. Its excellent stability, non-hygroscopic nature, and cost-effectiveness make it an essential bulk chemical.
