Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
LLDPE film Opalene F20015
LLDPE film Opalene F20015 is a high-quality linear low-density polyethylene (LLDPE) film known for its excellent clarity, toughness, and flexibility. It is produced using linear low-density polyethylene resin, offering superior mechanical properties and puncture resistance compared to conventional low-density polyethylene films. Opalene F20015 is widely used in packaging applications where strength, transparency, and sealability are critical. Its balanced properties make it suitable for various industrial and consumer packaging needs.
LLDPE film Opalene F20015
Primary Uses
- Flexible Packaging
- Used extensively for packaging food products such as snacks, bakery items, frozen foods, and fresh produce due to its excellent clarity and moisture barrier properties.
- Common in heat-sealable bags, pouches, and shrink films providing secure packaging and product visibility.
- Industrial Packaging
- Suitable for pallet wrapping and bundling of goods in warehousing and logistics to provide stability and protection during transport.
- Employed as protective overwrap for textiles, paper products, and other industrial goods.
- Agricultural Applications
- Utilized as greenhouse films, mulch films, and silage covers, benefiting from its flexibility and resistance to tearing under outdoor conditions.
Secondary Uses
- Consumer Products
- Used for manufacturing reusable shopping bags, trash liners, and liners for household storage.
- Medical Packaging
- Occasionally employed in sterile barrier packaging where clarity and seal integrity are essential.
- Printing and Lamination
- Acts as a substrate for flexible printed packaging and lamination with other films or materials to enhance barrier or mechanical properties.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Polyethylene, linear low-density
- Common/Trade Name: LLDPE Film (Opalene) F20015
- CAS Number: 9002-88-4
- HS Code: 3920.20.00
- Synonyms: Linear low-density polyethylene film; LLDPE film; Opalene film
2. Physical & Chemical Properties
- Physical State: Thin flexible film
- Color & Odor: Transparent/opal white; odorless
- Thickness: Typically 15-25 microns (varies by specification)
- Tensile Strength: High tensile strength and elongation at break
- Moisture Barrier: Moderate moisture vapor barrier
- Sealability: Excellent heat seal properties
- Temperature Resistance: Operating temperature range -50°C to 80°C
3. Safety & Hazard Attributes
- GHS Classification: Not hazardous under normal handling conditions
- Toxicity: Non-toxic and inert material
- Exposure Limits: No specific occupational exposure limits; standard hygiene practices apply
4. Storage & Handling Attributes
- Storage Conditions: Store in cool, dry environment away from direct sunlight and heat sources
- Container Type: Supplied in rolls wrapped with protective film or packaging
- Shelf Life: Stable for several years if stored properly
- Handling Precautions: Avoid puncturing or tearing during handling
5. Regulatory & Compliance Attributes
- Complies with food contact regulations where applicable (FDA, EFSA)
- Meets international standards for plastic packaging materials
- RoHS and REACH compliant
6. Environmental & Health Impact
- Biodegradability: Not biodegradable; recyclable depending on local facilities
- Ecotoxicity: Minimal environmental toxicity if managed properly
- Bioaccumulation: Not applicable
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic
Safety Handling Precautions
- PPE Required: Generally none required; gloves recommended for handling large rolls
- Handling Guidelines: Use proper lifting techniques for heavy rolls
- Storage Measures: Keep rolls covered to prevent dust and contamination
First Aid Measures
- Inhalation: Not applicable (solid film)
- Skin Contact: Wash with soap and water if irritation occurs (rare)
- Eye Contact: Not applicable; rinse if film particles contact eyes
- Ingestion: Not applicable
Firefighting Measures
- Fire Hazards: Combustible; burns with a sooty flame
- Extinguishing Media: Use water spray, foam, dry chemical, or CO₂ extinguishers
- Special Precautions: Avoid inhalation of smoke and decomposition products
- Hazardous Combustion Products: Carbon monoxide, carbon dioxide, and hydrocarbons
Related products
HDPE Blow HDB5502
HDPE Blow HDB5502 is a high-density polyethylene resin specifically formulated for blow molding applications. It is a semi-crystalline thermoplastic polymer characterized by excellent strength-to-density ratio, high chemical resistance, and superior processability in blow molding equipment. This grade exhibits high stiffness, good environmental stress crack resistance (ESCR), and excellent impact resistance, making it ideal for manufacturing durable hollow containers and complex-shaped products. The resin is supplied as granular pellets with consistent melt flow and homogeneity, optimized for efficient molding cycles and high throughput.
LLDPE injection 6201XR
LLDPE injection 6201XR is a linear low-density polyethylene resin specially formulated for injection molding applications. It offers excellent processability, high impact strength, and good flexibility. The material provides a balance of mechanical performance and ease of molding, making it ideal for producing thin-walled and complex-shaped parts. With superior clarity and toughness, LLDPE Injection 6201XR is widely used in manufacturing durable consumer goods, automotive components, and packaging items.
Pentaerythritol
Pentaerythritol is a high-purity, crystalline polyol used extensively in the production of alkyd resins, synthetic lubricants, explosives, and plasticizers. Its multifunctional alcohol structure provides excellent stability, high melting point, and good compatibility with various chemicals. Pentaerythritol 98% is valued for its role as a building block in chemical syntheses, offering enhanced durability, flexibility, and resistance in end products.
Polyvinyl Chloride Resin
Polyvinyl Chloride Resin is a white, odorless powder widely used as the base material in the production of both rigid and flexible PVC products. It is produced by polymerizing vinyl chloride monomer (VCM) and is categorized by K-value, which defines molecular weight and processing characteristics. PVC resin is valued for its durability, chemical resistance, electrical insulation, and flame retardancy. It is one of the most versatile plastics used across multiple industries including construction, electrical, automotive, packaging, and healthcare.
Polyvinyl Chloride Resin 701
Polyvinyl Chloride Resin 701 is a high-quality suspension-grade polyvinyl chloride resin with a K-value of approximately 70–71, indicating high molecular weight. It is widely used in the production of flexible PVC products where excellent strength, elongation, and plasticizer absorption are required. PVC Resin 701 offers superior mechanical properties, high thermal stability, and good compatibility with plasticizers, making it suitable for calendaring, extrusion, and molding applications in diverse industries.
PP Raffia 1003
PP Raffia 1003 is a polypropylene homopolymer resin commonly used for manufacturing raffia fibers and woven sacks. It offers high tensile strength, excellent dimensional stability, and good resistance to chemicals and environmental stress. This grade is ideal for producing durable woven fabrics used in packaging, agriculture, and construction applications.
Propylene PP Non Woven RH 38
Propylene PP Non Woven RH 38 is a polypropylene-based non-woven fabric known for its strength, durability, and lightweight properties. Manufactured through a process that binds polypropylene fibers without weaving, it results in a fabric that is breathable, resistant to chemicals and moisture, and highly versatile. This product is widely used in various industrial, medical, and consumer applications where disposable or reusable fabric is needed.
Styrene Polymer Copolymer
Styrene Polymer Copolymer is a high-performance copolymer consisting primarily of styrene combined with other monomers such as acrylonitrile or butadiene, designed to offer enhanced mechanical properties, chemical resistance, and processability. Supplied in bulk packaging of 230kg, it is widely used in plastics, adhesives, coatings, and rubber industries. This copolymer provides excellent toughness, thermal stability, and versatility, making it suitable for demanding industrial applications.
