Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
PP Copolymer 37MK10
PP Copolymer 37MK10 is a polypropylene copolymer resin characterized by enhanced clarity, impact resistance, and flexibility compared to homopolymer polypropylene. This copolymer combines propylene with a small percentage of ethylene, resulting in improved toughness and processability. It is widely used in injection molding, extrusion, and film applications across various industries, offering excellent chemical resistance and durability.
PP Copolymer 37MK10
Primary Uses
- Packaging Industry
- Used for manufacturing rigid and flexible packaging films, containers, and caps.
- Employed in food packaging due to its chemical resistance and safety.
- Utilized in shrink films and stretch films.
- Automotive Industry
- Used in producing interior and exterior automotive parts requiring toughness and impact resistance.
- Applied in manufacturing bumpers, trims, and housings.
- Consumer Goods
- Used for injection molded products such as toys, household items, and appliances.
- Employed in durable goods requiring flexibility and chemical resistance.
- Medical Applications
- Used in medical device components and packaging requiring sterilizability and biocompatibility.
Secondary Uses
- Textile Industry
- Utilized in fiber and non-woven fabric production for improved strength and elasticity.
- Construction
- Applied in pipe fittings, profiles, and insulation materials.
- Electrical Industry
- Used in electrical housings and insulating components due to its dielectric properties.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Polypropylene copolymer
- Common/Trade Name: PP Copolymer 37MK10
- CAS Number: 9003-07-0
- HS Code: 3902.10
- Synonyms: Polypropylene copolymer resin; PPC copolymer
2. Physical & Chemical Properties
- Physical State: Granules or pellets
- Color & Odor: Typically translucent or natural color; odorless
- Melting Point: Approximately 160–170°C
- Density: ~0.9 g/cm³
- Mechanical Properties: High impact strength, good flexibility
- Chemical Resistance: Resistant to acids, bases, and most solvents
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: Generally non-toxic; inert polymer
- Exposure Limits: No specific limits; use standard industrial hygiene
4. Storage & Handling Attributes
- Storage Conditions: Store in a dry, cool, well-ventilated area away from direct sunlight
- Container Type: Bulk bags, boxes, or containers
- Shelf Life: Typically 1–2 years under proper storage
- Handling Precautions: Avoid dust formation; use protective equipment if dust is generated
5. Regulatory & Compliance Attributes
- Complies with FDA and EU regulations for food contact (where applicable)
- Meets ASTM and ISO standards for polypropylene materials
6. Environmental & Health Impact
- Biodegradability: Not biodegradable; recyclable
- Ecotoxicity: Low environmental impact when properly managed
- Bioaccumulation: Not significant
Safety Handling Precautions
- PPE Required: Gloves and dust mask recommended during handling of powders or dust
- Handling Guidelines: Avoid inhalation of dust; maintain good ventilation
- Storage Measures: Keep containers tightly closed; prevent moisture ingress
First Aid Measures
- Inhalation: Move to fresh air if dust inhalation causes discomfort
- Skin Contact: Wash with soap and water if irritation develops
- Eye Contact: Rinse eyes with water thoroughly if dust enters
- Ingestion: Unlikely route; seek medical advice if necessary
Firefighting Measures
- Fire Hazards: Combustible; may produce dense smoke and toxic fumes when burned
- Extinguishing Media: Water spray, foam, dry chemical, or CO₂
- Special Precautions: Use self-contained breathing apparatus in enclosed areas
- Hazardous Combustion Products: Carbon oxides, hydrocarbons
Related products
HDPE Film F52H04
HDPE Film F52H04 Opalene is a high-density polyethylene film grade resin specially engineered for producing thin, flexible, and high-strength films. It is designed for blown film extrusion processes, delivering excellent mechanical properties, superior clarity (opal/opalene finish), and consistent gauge control. This resin offers high tensile strength, good puncture resistance, and excellent moisture barrier properties, making it ideal for packaging applications requiring durability and flexibility. Its balanced processing characteristics enable fast extrusion rates and uniform film thickness.
LLDPE injection 6201XR
LLDPE injection 6201XR is a linear low-density polyethylene resin specially formulated for injection molding applications. It offers excellent processability, high impact strength, and good flexibility. The material provides a balance of mechanical performance and ease of molding, making it ideal for producing thin-walled and complex-shaped parts. With superior clarity and toughness, LLDPE Injection 6201XR is widely used in manufacturing durable consumer goods, automotive components, and packaging items.
LLDPE Roto T3804U MFI/MFR
LLDPE Roto T3804U MFI/MFR is a linear low-density polyethylene resin designed specifically for rotational molding applications. It offers excellent melt flow characteristics (MFI/MFR) that facilitate even melting and smooth flow in the mold, producing parts with uniform thickness and good mechanical properties. This grade provides superior impact strength, flexibility, and chemical resistance, making it ideal for manufacturing large hollow items such as tanks, containers, and playground equipment. Its tailored flow properties enable high-quality surface finishes and improved production efficiency in roto molding processes.
Melamine
Melamine is an organic compound widely used as a raw material in the production of melamine-formaldehyde resins, laminates, adhesives, coatings, and flame retardants. It offers excellent hardness, thermal stability, and chemical resistance. Supplied in 25kg bags, melamine is a white crystalline powder with high nitrogen content, making it a valuable additive in plastics, construction materials, and surface treatments.
Polyvinyl Chloride Resin
Polyvinyl Chloride Resin is a white, odorless powder widely used as the base material in the production of both rigid and flexible PVC products. It is produced by polymerizing vinyl chloride monomer (VCM) and is categorized by K-value, which defines molecular weight and processing characteristics. PVC resin is valued for its durability, chemical resistance, electrical insulation, and flame retardancy. It is one of the most versatile plastics used across multiple industries including construction, electrical, automotive, packaging, and healthcare.
Polyvinyl Chloride Resin 702
Polyvinyl Chloride Resin 702 is a high molecular weight, suspension-grade polyvinyl chloride resin with a K-value around 70–72. It is specifically formulated for use in soft and flexible PVC products due to its excellent plasticizer absorption and high mechanical strength. Its superior elongation, thermal stability, and processability make it highly suitable for calendaring, extrusion, injection molding, and dip molding operations. PVC Resin 702 is extensively used across the cable, synthetic leather, film, and footwear industries.
Polyvinyl Chloride Tubing
Polyvinyl Chloride Tubing is a flexible, durable tube made from polyvinyl chloride (PVC), commonly used in laboratories for the safe and efficient transfer of gases, liquids, and chemicals. It features excellent chemical resistance, good mechanical strength, and flexibility, making it ideal for a wide range of laboratory applications including fluid transfer, vacuum lines, and connection of various lab apparatus. PVC Tubing is transparent or translucent to allow visual monitoring of fluid flow and is resistant to abrasion, corrosion, and weathering. It is available in various diameters and thicknesses to suit different laboratory requirements.
