Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Ammonium Bromide Extra Pure
Original price was: $ 18.00.$ 17.34Current price is: $ 17.34.
Ammonium Bromide Extra Pure is a high-purity, white crystalline powder highly soluble in water, widely used in laboratory settings for analytical, photographic, and synthetic applications. It serves as a reliable source of bromide ions in chemical reactions and is commonly used in preparing photographic emulsions, corrosion inhibitors, and certain pharmaceuticals. In analytical chemistry, it is employed in qualitative and quantitative analysis involving halide ion detection. The extra pure grade ensures minimal contamination, making it ideal for sensitive research and high-precision work. To preserve its stability and prevent moisture uptake, it should be stored in well-sealed containers in a cool, dry environment.
Ammonium Bromide Extra Pure
Primary Uses
- Source of Bromide Ions in Analytical Chemistry
- Supplies Br⁻ for qualitative analysis, precipitation reactions, and halide ion comparison studies.
- Reagent in Photographic and Imaging Chemistry
- Used in experimental preparation of silver bromide (AgBr) for photosensitive materials in research and educational labs.
- Precursor in Organic and Inorganic Synthesis
- Used in the synthesis of organobromine compounds and complex bromide salts in laboratory settings.
- Conductivity and Electrolyte Studies
- Provides a simple, high-purity ionic compound for electrical conductivity and ion transport experiments.
- Acid-Base Equilibrium Demonstrations
- NH₄⁺ acts as a weak acid; used to demonstrate hydrolysis of weak electrolytes and pH behavior in buffer systems.
Secondary Uses
- Component in Corrosion Testing
- Used in lab-scale studies of halide-induced corrosion on metal surfaces under controlled conditions.
- Reagent in Crystal Growth and Solubility Studies
- Studied for its crystallization behavior, especially in experiments involving salt mixtures and phase diagrams.
- Flame Test for Ammonium & Bromide Detection
- Applied in qualitative flame testing and spectroscopy to analyze cation and anion emissions.
- Simulation of Atmospheric or Marine Chemistry
- Investigated in environmental labs for modeling halide cycles in aerosol or seawater systems.
- Educational Demonstrations in Ionic Compound Properties
- Used in student labs to explore solubility, melting point, and conductivity of ionic solids.
| PACK SIZE | 250 grams Plastic Tin |
|---|
1. Basic Identification Attributes
- Chemical Name: Ammonium Bromide
- CAS Number: 12124-97-9
- HS Code: 28275100 (Bromides of sodium or potassium — falls under general bromides)
- Molecular Formula: NH₄Br
- Synonyms:
- Ammonium monobromide
- Hydrobromic acid, ammonium salt
- NH₄Br
2. Physical & Chemical Properties
- Physical State: Solid (crystalline powder)
- Color & Odor: White or colorless crystals; odorless
- Boiling Point: Decomposes before boiling
- Melting Point: ~235°C
- Density/Specific Gravity: ~2.43 g/cm³
- Solubility:
- Water: Freely soluble (~76 g/100 mL at 25°C)
- Alcohol: Slightly soluble
- pH Level: ~5.0–6.0 (in 5% aqueous solution – mildly acidic)
- Vapor Pressure: Negligible
- Flash Point: Not flammable
- Autoignition Temperature: Not applicable
- Viscosity: Not applicable (solid)
3. Safety & Hazard Attributes
- Hazard Class (GHS):
- Acute Toxicity (Oral, Category 4)
- Eye Irritation (Category 2A)
- Not generally hazardous in small lab quantities, but caution advised
- NFPA Ratings:
- Health: 2
- Flammability: 0
- Reactivity: 0
- Exposure Limits:
- No established OSHA or ACGIH limits
- Use general dust exposure precautions
- Reactivity:
- Stable under normal conditions
- Can release toxic fumes (e.g., NH₃, HBr) if heated to decomposition
4. Storage & Handling Attributes
- Storage Conditions:
- Store in a cool, dry area away from moisture
- Keep container tightly closed
- Incompatible Materials:
- Strong oxidizers, acids, alkalis
- Container Type:
- Glass or HDPE containers
- Shelf Life & Expiration Date:
- ~3 years if sealed and protected from humidity
- Special Handling Requirements:
- Use gloves and goggles
- Avoid inhalation of dust and contact with eyes
5. Regulatory & Compliance Attributes
- Regulatory Status:
- Listed under TSCA, REACH
- Approved for lab and photographic use
- Transportation Restrictions:
- Not regulated for ground or air transport in small lab quantities
- Waste Disposal Method:
- Dissolve and neutralize under controlled lab conditions
- Dispose of as halide waste in accordance with local regulations
6. Environmental & Health Impact
- Ecotoxicity:
- May be harmful to aquatic organisms at high concentrations
- Persistence in Environment:
- Dissociates into bromide and ammonium ions
- Carcinogenicity/Mutagenicity:
- Not classified as carcinogenic
- Biodegradability:
- Inorganic salt; not biodegradable, but environmentally manageable
SAFETY PRECAUTIONS
- Personal Protective Equipment (PPE):
- Wear a lab coat, safety goggles, and chemical-resistant gloves (e.g., nitrile or neoprene).
- Use a dust mask or work in a fume hood to avoid inhalation of powder.
- Handling:
- Avoid breathing dust and prevent contact with skin, eyes, and clothing.
- Use in a well-ventilated area or under a chemical fume hood.
- Keep container tightly closed when not in use.
- Avoid mixing with strong acids, oxidizers, or alkalis.
- Storage:
- Store in a cool, dry, well-ventilated area in a tightly sealed container.
- Protect from moisture (hygroscopic).
- Keep away from incompatible substances like strong oxidizers and acids.
- Hygiene Measures:
- Wash hands thoroughly after handling.
- Avoid touching face, especially eyes and mouth.
- Do not eat, drink, or smoke in the lab area.
FIRST AID MEASURES
- Inhalation:
- Move the affected person to fresh air.
- Seek medical attention if symptoms like coughing or shortness of breath develop.
- Provide oxygen if breathing becomes difficult.
- Skin Contact:
- Wash thoroughly with soap and water.
- Remove contaminated clothing.
- Seek medical attention if irritation or rash occurs.
- Eye Contact:
- Rinse cautiously with clean water for at least 15 minutes, lifting upper and lower eyelids occasionally.
- Remove contact lenses if present and easy to do.
- Seek medical attention if irritation persists.
- Ingestion:
- Rinse mouth with water.
- Do not induce vomiting.
- Give water only if the person is fully conscious.
- Seek immediate medical attention.
FIRE FIGHTING MEASURES
- Suitable Extinguishing Media:
- Use water spray, dry chemical powder, carbon dioxide (CO₂), or foam depending on surrounding materials.
- Specific Hazards:
- Non-flammable, but may release toxic fumes of ammonia and hydrogen bromide (HBr) if heated or involved in a fire.
- Protective Equipment for Firefighters:
- Wear full protective clothing and a self-contained breathing apparatus (SCBA).
- Firefighting Instructions:
- Evacuate the area and isolate the hazard.
- Cool fire-exposed containers with water spray.
- Avoid inhaling fumes—ventilate after the fire is extinguished.
Related products
Acetone Extra Pure
Acetone Extra Pure is a highly volatile, flammable, and colorless liquid widely used as a powerful solvent in laboratory and industrial applications. Known for its exceptional ability to dissolve a wide range of substances, it is commonly employed for cleaning laboratory glassware, thinning resins, and removing organic residues. In the cosmetics and pharmaceutical industries, acetone is used in nail polish removers and formulation processes. Its high evaporation rate and purity make it suitable for analytical procedures and synthesis work, especially where contaminant-free solvents are essential. With a distinct odor and low boiling point, Acetone Extra Pure is an indispensable reagent for both routine and specialized chemical operations.
Aluminium Chloride Hydrated Extra Pure
Aluminium Chloride Hydrated Extra Pure is a high-purity, white to pale yellow crystalline compound containing bound water molecules, making it less reactive than its anhydrous counterpart but still highly effective in various laboratory applications. It is commonly used in aqueous-phase reactions, coordination chemistry, and as a reagent for studying aluminum ion behavior in solution. The hydrated form offers enhanced stability and ease of handling, making it suitable for educational experiments, buffer formulations, and inorganic synthesis where precise aluminum content is required. Its extra pure grade ensures minimal interference from impurities, supporting accurate and reproducible results in analytical and research settings. Proper storage in a cool, dry place is essential to prevent further hydration or contamination.
Aluminium Oxide Extra Pure
Aluminium Oxide Extra Pure is a high-purity, white, odorless crystalline powder widely used in laboratory applications for its chemical stability, hardness, and high melting point. It serves as a reliable reagent in inorganic synthesis, a polishing and grinding medium in sample preparation, and a support material for catalysts in chemical reactions. This form of alumina is also used in adsorption studies, ceramic research, and as a desiccant in controlled drying processes. Its extra pure grade ensures minimal contamination, making it suitable for sensitive analytical work and high-precision experiments. For optimal performance, it should be stored in a dry, tightly sealed container to prevent moisture absorption and maintain its physical integrity.
Ammonia Solution Extra Pure
Ammonia Solution Extra Pure is a high-purity, clear, colorless liquid composed of ammonia gas dissolved in water, emitting a strong, characteristic pungent odor. Widely used in laboratory chemistry, it serves as a crucial reagent in acid-base titrations, complexometric analysis, and the preparation of ammonium salts and metal-ammonia complexes. Its alkaline nature makes it valuable for pH adjustment, cleaning of laboratory glassware, and as a reducing agent in certain analytical procedures. The extra pure grade ensures low levels of impurities, supporting reliable results in sensitive experimental work. Due to its volatility and corrosiveness, it should be handled in well-ventilated areas and stored in tightly sealed, chemically resistant containers.
Ammonium Chromate Extra Pure
Ammonium Chromate Extra Pure is a high-purity, yellow crystalline compound primarily used in laboratory settings for analytical and inorganic chemistry applications. It serves as a strong oxidizing agent and is commonly utilized in qualitative analysis, particularly in the detection of cations, and in the preparation of chromate-based reagents. Its high solubility in water and ability to act as a corrosion inhibitor also make it useful in material science and electrochemical experiments. Due to the presence of hexavalent chromium, it is toxic and environmentally hazardous, requiring strict handling procedures and protective equipment. The extra pure grade ensures minimal impurities, making it suitable for high-precision research. It must be stored in tightly sealed containers, away from light, heat, and incompatible substances.
Ammonium Ferric Sulphate Extra Pure
Ammonium Ferric Sulphate Extra Pure, also known as ferric ammonium sulfate or iron alum, is a high-purity, violet to light purple crystalline compound used extensively in laboratory settings for analytical and inorganic chemistry. It serves as a reliable oxidizing agent and a standard in redox titrations, particularly in permanganometry. Its stable and non-hygroscopic nature makes it ideal for preparing standard iron solutions, studying coordination complexes, and teaching laboratory procedures involving iron(III) salts. The extra pure grade ensures minimal interference from impurities, enabling accurate and reproducible results in sensitive experiments. It should be stored in a dry, cool environment in well-sealed containers to preserve its chemical integrity.
Barium Hydroxide Hydrate Extra Pure
Barium Hydroxide Hydrate Extra Pure is a high-purity, white crystalline compound containing eight molecules of water of crystallization. It is widely used in laboratory chemistry as a strong base in titration, qualitative analysis, and inorganic synthesis. Its high solubility in water and strong alkalinity make it valuable for neutralization reactions, preparation of barium salts, and as a reagent for detecting sulfates, carbonates, and phosphates. In analytical applications, it is often used where precise pH control and minimal contamination are critical. The extra pure grade ensures consistent performance in high-accuracy experiments. It should be handled with care and stored in a tightly sealed container in a cool, dry place, as it is caustic and sensitive to carbon dioxide in the air, which can lead to carbonate formation.
Barium Sulphate Extra pure
Barium Sulphate Extra Pure is a high-purity, white, odorless crystalline powder known for its extreme insolubility in water and chemical inertness, making it highly useful in laboratory settings for qualitative analysis and gravimetric determinations. It is commonly employed in the detection and quantification of sulfate ions through precipitation reactions, as well as in studies involving solubility equilibria and surface chemistry. Its high density and stability also make it valuable in preparing calibration standards and radiopaque materials in research. The extra pure grade ensures minimal contamination, providing consistent and reliable results in sensitive analytical procedures. It should be stored in a dry, tightly sealed container to maintain its quality and prevent contamination.
