Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Glycerol Extra Pure (Glycerin)
Original price was: $ 36.92.$ 36.75Current price is: $ 36.75.
Glycerol Extra Pure is a clear, viscous, and odorless liquid widely valued for its hygroscopic and solvent properties. With a purity suitable for laboratory, pharmaceutical, and analytical applications, it serves as a versatile reagent and humectant. In laboratories, Glycerol is commonly used in sample preservation, preparation of enzyme storage solutions, and as a stabilizing agent in electrophoresis gels. Its non-toxic and biodegradable nature also makes it ideal for educational experiments and sensitive chemical processes. Its high purity ensures consistent performance in both qualitative and quantitative analysis.
Glycerol Extra Pure (Glycerin)
Primary Uses
- Cryoprotectant in biological storage:
Widely used to preserve cells, enzymes, and bacteria during freezing by preventing ice crystal formation. - Molecular biology reagent:
Commonly used in enzyme storage buffers, sample loading buffers for electrophoresis, and DNA/RNA preservation.
Secondary Uses
- Viscosity modifier in chemical formulations:
Acts as a thickener or stabilizer in the preparation of lab-grade lotions, gels, and emulsions. - Calibration and reference standard:
Employed in refractive index calibration and density measurement experiments. - Solvent in pharmaceutical and food simulations:
Used in dissolution testing, and solubility experiments due to its hygroscopic and non-toxic nature.
| PACK SIZE | 2.5 Litres Plastic bottle |
|---|
1. Basic Identification Attributes
- Chemical Name: Glycerol
- Other Names: Glycerin, 1,2,3-Propanetriol
- Chemical Formula: C₃H₈O₃
- CAS Number: 56-81-5
- Molecular Weight: 92.09 g/mol
- Grade: Extra Pure (Laboratory Reagent Grade)
- Appearance: Clear, colorless, viscous liquid
- Odor: Odorless or faintly sweet
2. Physical & Chemical Properties
- Boiling Point: ~290 °C (decomposes)
- Melting Point: ~18 °C
- Density: ~1.26 g/cm³ at 20 °C
- Viscosity: High; ~945 cP at 20 °C
- Solubility: Miscible with water and alcohol; slightly soluble in ether
- Refractive Index: ~1.473
3. Safety & Hazard Attributes
- Hazard Classification (GHS):
✅ Non-hazardous under typical laboratory use - Hazard Statements:
- Not classified as hazardous, but may cause mild eye/skin irritation with prolonged contact
- PPE Requirements:
- Lab coat
- Gloves (nitrile recommended)
- Safety goggles
- First Aid Measures:
- Inhalation: Not expected to pose a hazard; move to fresh air if discomfort occurs
- Skin Contact: Wash with soap and water
- Eye Contact: Rinse with water for several minutes
- Ingestion: Non-toxic in small quantities, but seek medical advice for large ingestion
4. Storage & Handling Attributes
- Storage Conditions:
- Store in a tightly sealed container
- Keep in a cool, dry, well-ventilated place
- Protect from excessive heat and light
- Handling Notes:
- Avoid contamination
- Use clean dispensing tools to prevent microbial growth
- Clean up spills immediately (slippery on floors)
5. Regulatory & Compliance Attributes
- Food/Pharma Relevance:
- GRAS status (Generally Recognized As Safe) for food/pharma (non-lab grade)
- Found in USP, BP, and FCC for specific purities
- Labeling Compliance:
- GHS-compliant labeling preferred for lab supply
- No significant environmental hazard
6. Laboratory Applications
- Primary Uses:
- Used as a solvent and humectant in laboratory preparations
- Medium for enzyme reactions or sample preservation
- Component in buffer solutions and biological media
- Secondary Uses:
- Cryoprotectant in microbiology and cell storage
- Viscosity modifier in reagents and formulations
- Calibration fluid in refractometry
SAFETY PRECAUTIONS
Personal Protective Equipment (PPE):
- Wear lab coat, nitrile gloves, and safety goggles.
- Use in a well-ventilated area or fume hood if heated.
Handling:
- Avoid contact with eyes and prolonged skin exposure.
- Prevent spills and clean up immediately to avoid slipping hazards.
- Wash hands thoroughly after use.
Storage:
- Store in a tightly closed container.
- Keep in a cool, dry, well-ventilated area away from direct sunlight and heat.
- Avoid storage near strong oxidizers.
FIRST AID MEASURES
Inhalation:
- Move person to fresh air.
- Seek medical attention if symptoms such as coughing or dizziness occur.
Skin Contact:
- Wash skin with soap and water.
- Remove contaminated clothing.
- Seek medical advice if irritation develops.
Eye Contact:
- Rinse immediately with plenty of water for at least 15 minutes.
- Remove contact lenses if present and easy to do.
- Get medical attention if irritation persists.
Ingestion:
- Rinse mouth with water.
- Do not induce vomiting.
- Seek medical attention if large quantities are swallowed or if symptoms occur.
FIRE FIGHTING MEASURES
Flammability:
- Slightly combustible; may ignite at high temperatures.
Extinguishing Media:
- Use dry chemical, CO₂, alcohol-resistant foam, or water spray.
Hazardous Combustion Products:
- May release acrolein and carbon oxides upon thermal decomposition.
Firefighter Protection:
- Use self-contained breathing apparatus (SCBA) and full protective clothing.
- Avoid inhaling smoke or vapors during fire suppression.
Related products
Benedict Solution Extra Pure
Benedict Solution Extra Pure is a high-purity, blue-colored reagent solution widely used in laboratory settings for the qualitative detection of reducing sugars, such as glucose and fructose. It contains copper(II) sulfate, sodium citrate, and sodium carbonate, which react with reducing sugars under heat to form a colored precipitate ranging from green to brick red, depending on sugar concentration. This makes it essential in biochemical and educational laboratories for carbohydrate analysis and metabolic studies. The extra pure grade ensures consistent composition and reliable colorimetric response, supporting accurate and reproducible results in teaching and research environments. It should be stored in a cool, dark place in a tightly sealed container to maintain stability and prevent degradation.
Benzene Extra Pure
Benzene Extra Pure is a high-purity, clear, highly volatile, and flammable liquid with a characteristic aromatic odor, used extensively in laboratory settings for analytical, organic, and physical chemistry applications. It serves as a non-polar solvent for a wide range of chemical reactions, particularly in the study of aromatic compounds, electrophilic substitution mechanisms, and polymer chemistry. Its stability and solvency make it suitable for sample preparation, purification processes, and spectral analysis. The extra pure grade ensures minimal impurities, delivering consistent results in precision research. Due to its toxic and carcinogenic nature, benzene must be handled in a well-ventilated fume hood with appropriate protective equipment and stored in tightly sealed containers away from heat, sparks, and oxidizers.
Butanol Extra Pure
Butanol Extra Pure is a high-purity aliphatic alcohol commonly used in laboratory environments as a solvent, reagent, and intermediate in organic synthesis. Its moderate polarity and ability to dissolve a wide range of compounds make it ideal for use in extractions, chromatography, and spectrophotometric analysis. It also serves as a starting material for producing esters, plasticizers, and pharmaceuticals. The 99.4% purity ensures minimal water and impurity content, providing reliable consistency in sensitive procedures. With a relatively low evaporation rate and good miscibility with many organic solvents, it is suitable for both preparative and analytical applications. Proper storage in a cool, ventilated area in tightly sealed containers is essential to preserve its quality and reduce volatility.
Disodium Hydrogen Phosphate Dihydrate Extra Pure
Disodium Hydrogen Phosphate Dihydrate Extra Pure is a laboratory-grade chemical widely utilized as a buffering agent and pH stabilizer in analytical chemistry, molecular biology, and biochemical research. It is commonly used in the preparation of phosphate buffer solutions, supporting the maintenance of optimal conditions for enzyme activity and cell culture. This dihydrate form ensures accurate hydration levels for reliable solution formulation. Its high purity makes it suitable for sensitive lab applications requiring minimal interference from impurities. The compound should be kept tightly sealed in a dry environment to preserve its integrity and reactivity.
EDTA Disodium Salt Extra Pure
EDTA Disodium Salt Extra Pure is a high-purity chelating agent widely used in laboratory settings for complexometric titrations, metal ion sequestration, and buffer preparation. It binds strongly with divalent and trivalent metal ions like calcium, magnesium, and iron, making it essential in water hardness testing, biochemical research, and analytical chemistry. Its stability and effectiveness in controlling metal ion activity also make it valuable in molecular biology protocols and diagnostic reagent formulations.
Nitric Acid Extra pure
Nitric Acid Extra pure is a high-purity, concentrated mineral acid supplied in a secure 2.5-litre packaging, ideal for laboratory and industrial applications requiring precision and consistency. Known for its strong oxidizing properties, nitric acid (HNO₃) is widely used in analytical chemistry, metal etching, sample digestion, and nitrate salt preparation.
This Extra Pure grade ensures minimal contaminants, making it especially suitable for trace analysis, high-purity synthesis, and quality control laboratories. Its sharp, acrid odor and highly corrosive nature demand careful handling with proper personal protective equipment (PPE), including acid-resistant gloves, goggles, and fume hoods. It must be stored in tightly sealed, compatible containers away from organic materials, bases, and flammable substances. This reagent is essential in both academic research and industrial processes involving nitration reactions, fertilizer formulation, and explosives development.
Toluene Extra Pure
Toluene Extra Pure is a volatile, aromatic hydrocarbon widely used in analytical, organic, and industrial laboratory settings. As a high-purity, non-polar solvent, it is essential for reactions involving aromatic compounds, sample preparation, extraction, and cleaning. Toluene’s volatility and solvency make it indispensable in high-precision environments, though its flammability and health hazards require careful handling and strict safety compliance. Its Extra Pure grade ensures minimal impurities for research and sensitive formulation work.
Trimethylpentane HPLC Grade Extra Pure
Trimethylpentane HPLC Grade Extra Pure is a high-purity isomer of octane primarily used as a non-polar solvent in high-performance liquid chromatography. With low UV absorbance and excellent volatility, it is ideal for analytical applications requiring solvent precision and cleanliness. In fuel and petrochemical research, it serves as a reference hydrocarbon and standard for combustion studies. Its high flammability demands careful handling, grounding during transfer, and use in controlled laboratory environments.
