Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Balance Spring
Original price was: $ 15.55.$ 15.48Current price is: $ 15.48.
The Balance Spring is a fundamental mechanical component used in balances and scales to measure weight through elastic deformation. It converts force into measurable displacement, enabling precise weight determination in various laboratory and industrial balances. Manufactured from high-quality, durable metals with excellent elastic properties, the balance spring ensures consistent performance and longevity under repeated use. It is essential for maintaining accuracy and reliability in mechanical weighing devices.
Balance Spring
Primary Uses
- Laboratory Applications
- Acts as the core elastic element in mechanical balances for measuring mass of samples, chemicals, and reagents.
- Used in calibration and repair of laboratory weighing instruments.
- Provides accurate force-to-displacement conversion in analytical balances.
- Facilitates precise mass measurement in experimental setups requiring manual weighing.
Secondary Uses
- Industrial Applications
- Integral component in industrial mechanical scales for raw material and product weight measurement.
- Used in maintenance and servicing of mechanical weighing equipment in production lines.
- Supports quality control processes by ensuring reliable weight measurements.
- Applied in mechanical pressure and force measuring devices in manufacturing environments.
| PACK SIZE | 2000gms |
|---|
1.Basic Identification Attributes
- Component Type: Balance Spring
- Material: High-grade spring steel or alloy
- Function: Converts applied weight force into mechanical displacement
2.Physical & Chemical Properties
- Elasticity: High resilience for repeated use without deformation
- Corrosion Resistance: Treated or coated for durability
- Dimensions: Varied depending on balance model compatibility
- Operating Environment: Suitable for dry, controlled environments
3.Safety & Hazard Attributes
- Mechanical Risks: Potential for injury if spring snaps under tension; handle with care
- Toxicity: Non-toxic materials
- Allergens: None identified
4.Storage & Handling Attributes
- Storage Conditions: Store in dry, clean environment to prevent corrosion and damage
- Handling Precautions: Avoid overstressing the spring; handle with gloves to prevent injury
5.Regulatory & Compliance Attributes
- Manufactured to industry standards for mechanical components
- Quality controlled for use in laboratory and industrial weighing devices
6.Environmental & Health Impact
- Material is recyclable metal alloy
- Minimal environmental impact when disposed of properly
Safety Handling Precautions
- Wear protective gloves during handling to prevent injury from sharp edges or recoil
- Do not overstretch or deform spring beyond recommended limits
First Aid Measures
- In case of injury (cuts, punctures), clean wound and seek medical attention if necessary
- No chemical hazards involved
Firefighting Measures
- Fire Hazard: Non-flammable metal component
- Extinguishing Media: Not applicable
- Special Precautions: None required
Related products
Balance Mechanical Ohaus Centre
Balance Mechanical Ohaus Centre is a high-precision mechanical balance designed for laboratory and industrial use. Featuring a central zero adjustment, this balance enables accurate measurement of small to medium-weight samples with fine calibration control. Constructed with durable, corrosion-resistant materials, it delivers reliable and consistent weighing results without requiring electrical power. Its simple mechanical design ensures easy operation and maintenance, making it suitable for research laboratories, quality control departments, and industrial environments where precise manual weighing is essential.
Bar Breaking Apparatus
The Bar Breaking Apparatus is a mechanical testing device used to determine the breaking strength and mechanical properties of materials, particularly bars and rods, in laboratory and industrial settings. It applies controlled force to a specimen until it fractures, providing critical data for quality control, material research, and compliance with industry standards. Constructed from robust metals with precise force application mechanisms, this apparatus ensures reliable, repeatable results essential for material characterization and safety assessments.
Bourdan Gauge
The Bourdon Gauge is a mechanical pressure measuring instrument widely used to measure medium to high pressure of gases and liquids in various laboratory and industrial applications. It consists of a curved, hollow metal tube which straightens as pressure increases, causing a pointer to move over a calibrated scale for easy reading. Known for its durability, reliability, and precision, the Bourdon Gauge is essential in pressure monitoring, process control, and safety systems. It operates without electrical power, making it ideal for harsh environments.
Burette Clamp
The Burette Clamp is a laboratory apparatus designed to securely hold burettes in place during titration and other volumetric procedures. Made from durable materials such as metal with rubber or plastic-coated grips, it ensures stability and prevents slippage or breakage. The clamp typically attaches to a retort stand or support rod, allowing hands-free operation and precise liquid dispensing.
Chemical balance weight box
The Chemical Balance Weight Box is a sturdy, protective container designed to store and organize standard balance weights used for chemical and laboratory measurements. Made from durable materials like wood, metal, or plastic, it ensures the secure keeping of precision weights, protecting them from dust, moisture, and damage. It is essential for maintaining the accuracy and longevity of laboratory weights.
Crucible with lid
Crucible with Lid is a heat-resistant container used in laboratories and industries to heat, melt, or calcine substances at very high temperatures. Typically made from materials such as porcelain, alumina, or graphite, these crucibles can withstand thermal shock and chemical corrosion. The accompanying lid helps contain the sample, minimize contamination, and reduce material loss during heating or combustion processes.
Optical Pins
Optical Pins are precision-engineered small pins used primarily in optical laboratories and equipment for alignment, securing, and positioning optical components such as lenses, mirrors, and prisms. Made from high-grade metals or corrosion-resistant materials, these pins ensure stable and accurate placement of delicate parts during assembly or experimental setups. Their fine tips and consistent dimensions provide reliable fixation without damaging sensitive optical surfaces. Optical pins are essential for maintaining optical path accuracy and are commonly used in microscopy, laser systems, spectrometry, and other photonics applications.
Paint Gauge
A Paint Gauge is a precise measuring instrument used in laboratories and quality control environments to measure the thickness of paint coatings and other surface finishes. It allows technicians and researchers to assess the uniformity and adequacy of paint layers on various substrates, ensuring compliance with industry standards and specifications. Paint gauges can be mechanical or digital, often employing magnetic, ultrasonic, or mechanical principles to provide accurate, non-destructive thickness measurements. They are essential tools in the manufacturing, automotive, aerospace, and construction industries for maintaining coating quality and durability.
