Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-12%
Magnet bar
Original price was: $ 19.97.$ 19.87Current price is: $ 19.87.
Sodium Sulphate
Original price was: $ 0.90.$ 0.79Current price is: $ 0.79.
Whatsapp Order
Sodium Sulphate (Na₂SO₄) is a white crystalline powder or granule, odorless and highly soluble in water. This 25kg packaged product is widely used in detergents, glass manufacturing, chemical industries, and pulp and paper processing. It acts as a filler, bulking agent, and drying agent, with excellent stability and non-reactivity under standard storage conditions. Its cost-effectiveness and availability make it an essential raw material in many industrial processes.
Description
Sodium Sulphate
Primary Uses
- Detergent Industry
- Filler and Builder: Used as a filler in powdered laundry detergents to improve flow and bulk.
- Water Softening: Helps soften water, enhancing detergent effectiveness.
- Formulation Ingredient: Acts as a carrier for other detergent components.
- Glass Manufacturing
- Glass Batch Ingredient: Used as a fluxing agent to lower melting temperature in glass production.
- Opacifier: Enhances opacity in specialty glasses and enamels.
- Pulp & Paper Industry
- Kraft Pulping Process: Used in recovery boilers as part of the chemical recovery cycle.
- Paper Finishing: Employed as a filler to improve paper brightness and opacity.
- Chemical Industry
- Sodium Source: Serves as a raw material for manufacturing sodium compounds like sodium sulfide and sodium silicate.
- Salt Bath in Dyeing: Used in textile dyeing as a leveling agent.
- Textile Industry
- Dye Fixation: Facilitates uniform dye absorption in fabric processing.
- Scouring Agent: Aids in removal of natural oils and waxes from fibers.
- Pharmaceutical Industry
- Excipient: Occasionally used as a bulking agent in tablet formulations.
- Food Industry
- Food Additive: Employed as a processing aid, stabilizer, or anti-caking agent (E514).
- Freeze-Drying Agent: Used in certain freeze-drying processes.
Secondary Uses
- Thermal Storage
- Phase Change Material (PCM): Used in thermal energy storage due to its high heat capacity.
- Agriculture
- Soil Amendment: Occasionally applied to improve sulfate levels in deficient soils.
- Tanning Industry
- Leather Processing: Used in soaking and deliming steps.
- Environmental Applications
- Wastewater Treatment: Employed to precipitate heavy metals and adjust ionic strength.
- Laboratory & Research
- Desiccant: Used to dry organic solvents and gases.
- Reagent: Used in analytical chemistry for sulfate determination.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Sodium sulfate
- Common/Trade Name: Sodium sulphate, Glauber's salt (decahydrate form)
- CAS Number: 7757-82-6
- HS Code: 2833.23.00
- Synonyms: Glauber's salt (anhydrous and decahydrate), Sodium sulfate decahydrate
2. Physical & Chemical Properties
- Physical State: White crystalline powder or granules
- Color & Odor: White; odorless
- Solubility: 19.5 g/100 mL water at 20°C
- Density: 2.66 g/cm³ (anhydrous)
- Melting Point: 884 °C (decomposes)
- pH (1% solution): Neutral to slightly alkaline (~7-9)
- Hydration States: Anhydrous and decahydrate (Glauber's salt)
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: LD₅₀ (oral, rat) > 2000 mg/kg
- Exposure Limits: No specific occupational exposure limit; use general dust limits
- Corrosivity: Non-corrosive
4. Storage & Handling Attributes
- Storage Conditions: Store in dry, cool, well-ventilated area away from moisture
- Container Type: 25kg polypropylene or paper bags with polyethylene lining
- Shelf Life: Indefinite if kept dry and sealed
- Handling Precautions: Avoid dust generation; use proper respiratory protection if dusty
5. Regulatory & Compliance Attributes
- REACH Registered
- FDA Approved (Food additive E514)
- Complies with OSHA Hazard Communication Standard
- Not classified as hazardous for transport
6. Environmental & Health Impact
- Biodegradability: Inorganic salt; not biodegradable but environmentally benign
- Ecotoxicity: Low toxicity to aquatic organisms at typical concentrations
- Bioaccumulation: Not expected
- Aquatic Impact: Excess sulfate can affect aquatic ecosystems if discharged in large quantities
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Gloves, dust mask, safety goggles recommended during bulk handling
- Handling Guidelines: Avoid inhalation of dust; ensure good ventilation
- Storage Measures: Keep containers tightly closed and dry
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if irritation persists
- Skin Contact: Wash with soap and water
- Eye Contact: Rinse immediately with plenty of water for at least 15 minutes; seek medical advice if irritation occurs
- Ingestion: Rinse mouth; seek medical advice if large quantities ingested
Firefighting Measures
- Fire Hazards: Non-flammable; does not support combustion
- Extinguishing Media: Use extinguishing media appropriate to surrounding fire
- Hazardous Combustion Products: None known
Related products
Calcium Carbonate Filler
Calcium Carbonate Filler is a high-quality, uncoated ground calcium carbonate (GCC) specially engineered for use as a filler in polyethylene (PE) and other polyolefin resins. This grade of calcium carbonate is designed to enhance the physical and mechanical properties of plastics while providing cost-effective bulk and improved processing. It is a fine, white, odorless powder with excellent brightness, high purity, and uniform particle size distribution. Its use improves stiffness, impact resistance, dimensional stability, and surface finish in polyethylene applications such as films, sheets, pipes, and molded parts.
Calcium Carbonate Heavy
Calcium Carbonate Heavy is a high-density, finely ground, natural mineral primarily composed of calcium carbonate (CaCO₃). Known for its higher bulk density compared to regular grades, this filler is widely used in applications requiring enhanced weight, opacity, and strength. It is commonly employed as a functional filler and extender in industries such as plastics, paints, coatings, adhesives, rubber, paper, and construction materials. Its inert nature, whiteness, and particle size distribution make it suitable for improving mechanical properties and surface finish, while also offering cost efficiency by replacing more expensive raw materials.
Calcium Carbonate Light
Calcium Carbonate Light is a finely ground, low bulk density natural mineral composed primarily of calcium carbonate (CaCO₃). Compared to standard grades, it has a lower density and larger particle size distribution, making it suitable for applications where light weight and high brightness are important. This form is extensively used as a filler and extender in industries such as plastics, paints, rubber, paper, adhesives, and construction materials to improve opacity, brightness, and texture, while maintaining low weight and cost efficiency. Its chemical inertness and whiteness provide functional and aesthetic advantages across formulations.
Coated Calcium Carbonate
Coated Calcium Carbonate is a fine, white, odorless powder consisting of naturally occurring ground calcium carbonate (CaCO₃) treated with a surface coating—typically stearic acid or other fatty acids—to enhance compatibility with non-polar matrices. This coating improves dispersion in plastic and rubber formulations, reduces moisture pickup, and enhances the physical properties of the final product. Compared to uncoated grades, coated calcium carbonate offers better hydrophobicity, improved flow properties, and stronger interfacial bonding in polymeric systems. It is widely used in plastics, rubber, paints, sealants, adhesives, paper, and more.
Filler WTD
Filler WTD is a versatile, finely processed powdered filler primarily used in a wide range of industrial applications including paints, coatings, plastics, adhesives, sealants, rubber compounds, and construction materials. It is engineered to improve product performance by enhancing mechanical properties, increasing volume, reducing cost, and improving processing characteristics. Filler WTD typically exhibits excellent dispersibility, consistent particle size distribution, and good compatibility with various resin systems and binders. Its primary role is to act as an inert extender or reinforcing agent, providing bulk and stability while maintaining or enhancing the physical and chemical properties of the final formulation.
Magnesium Carbonate Light
Magnesium Carbonate Light is a fine, white, odorless powder primarily composed of magnesium carbonate (MgCO₃). It is characterized by its light texture and high purity. This mineral compound is widely used across various industries due to its excellent absorption properties, mild alkalinity, and non-toxic nature. Magnesium Carbonate Light is commonly employed as an antacid, drying agent, filler, and flow aid in food, pharmaceutical, cosmetic, and industrial applications.
Polywhite B
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
Silicon Dioxide
Silicon Dioxide (SiO₂), commonly known as silica, is a naturally occurring inorganic compound found abundantly in the Earth’s crust. In its refined, powdered form, it is used as an anti-caking agent, filler, absorbent, and thickener across a wide range of industries. It is odorless, tasteless, chemically inert, and stable under normal conditions. Packaged in 10kg units, silicon dioxide is highly versatile and widely accepted for use in food, pharmaceutical, cosmetic, and industrial applications.
