Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-1%
Silica Gel Self Indicator Coarse Extra Pure
Original price was: $ 17.79.$ 17.67Current price is: $ 17.67.
Silver Chloride Extra Pure
Original price was: $ 24.87.$ 24.76Current price is: $ 24.76.
Silicon Emulsion Extra Pure
Original price was: $ 18.00.$ 17.82Current price is: $ 17.82.
Whatsapp Order
Silicon Emulsion Extra Pure is a high-quality aqueous dispersion of polysiloxane polymers known for its emulsifying and stabilizing properties. It is widely used in laboratory, pharmaceutical, cosmetic, industrial, and agricultural applications due to its excellent water-repellent, protective, and conditioning capabilities. The product improves texture, durability, and adhesion in formulations and materials. Its Extra Pure grade ensures minimal impurities for sensitive applications. Proper storage and handling prevent degradation and ensure maximum performance.
Description
Silicon Emulsion Extra Pure
PRIMARY USES
- Analytical Reagent & Laboratory Applications:
- Used as a stabilizer and emulsifying agent in analytical and industrial formulations.
- Functions in surface treatment and modification processes in laboratory experiments.
- Applied in preparation of dispersion systems for material testing.
- Pharmaceutical & Cosmetic Industry:
- Acts as an emulsifier and conditioning agent in creams, lotions, and personal care products.
- Improves texture, spreadability, and moisture retention of formulations.
- Construction & Industrial Applications:
- Used as a water-repellent and protective coating for construction materials such as concrete and wood.
- Enhances durability, weather resistance, and surface smoothness.
SECONDARY USES
- Agricultural Applications:
- Functions as a carrier and spreader for pesticides and herbicides in agricultural sprays.
- Improves adhesion and uniform application of agrochemicals.
- Textile Industry:
- Used as a softening and finishing agent to improve fabric feel and reduce static.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name: Silicon Emulsion
- CAS Number: Varies by formulation (typically no single CAS)
- HS Code: 3811.90.00
- Molecular Formula: Polysiloxane-based aqueous dispersion
- Synonyms: Silicone Emulsion, Siloxane Emulsion, Polysiloxane Dispersion
2. Physical & Chemical Properties
- Physical State: Liquid emulsion
- Color & Odor: Milky white, mild characteristic odor
- Density/Specific Gravity: Approximately 1.0 g/cm³
- Solubility: Dispersible in water
- pH Level: Neutral to slightly alkaline (pH 6–9)
- Flash Point: Non-flammable
3. Safety & Hazard Attributes
- Hazard Class (GHS Classification): Generally low hazard; depends on specific formulation
- NFPA Ratings: Health 1, Flammability 0, Reactivity 0
- Exposure Limits: No specific OSHA or ACGIH limits
- Reactivity: Stable under normal storage and handling conditions
4. Storage & Handling Attributes
- Store in a cool, dry, well-ventilated place away from direct sunlight
- Keep container tightly closed when not in use
- Avoid strong oxidizing agents and acids
- Use plastic or metal containers, sealed tightly
- Typical shelf life: 1–2 years if stored properly
5. Regulatory & Compliance Attributes
- Complies with REACH, TSCA, and other chemical inventories where applicable
- Not classified as hazardous for transportation
- Dispose in accordance with local regulations
6. Environmental & Health Impact
- Low environmental toxicity; biodegradable components depending on formulation
- Not classified as carcinogenic or mutagenic
- Biodegradable under aerobic conditions
SAFETY HANDLING PRECAUTIONS
SAFETY PRECAUTIONS
- Personal Protective Equipment (PPE):
- Wear chemical-resistant gloves and safety goggles
- Use protective clothing to avoid skin contact
- Use in well-ventilated areas to avoid inhalation of any mists
- Handling:
- Avoid prolonged or repeated skin contact
- Avoid eye contact and inhalation of vapors or sprays
- Wash hands thoroughly after handling
- Storage:
- Store in sealed containers away from incompatible materials
- Keep out of reach of children and animals
FIRST AID MEASURES
- Inhalation:
- Move to fresh air immediately
- Seek medical attention if respiratory symptoms persist
- Skin Contact:
- Wash thoroughly with soap and water
- Remove contaminated clothing
- Seek medical advice if irritation occurs
- Eye Contact:
- Rinse immediately with plenty of water for at least 15 minutes
- Keep eyelids open during rinsing
- Seek medical attention if irritation persists
- Ingestion:
- Rinse mouth with water
- Do not induce vomiting unless directed by medical personnel
- Seek medical attention if symptoms appear
FIRE FIGHTING MEASURES
- Flammability:
- Non-flammable in typical formulations
- Extinguishing Media:
- Use water spray, foam, dry chemical, or CO₂
- Hazardous Combustion Products:
- May emit irritating fumes of silicon oxides when heated to decomposition
- Firefighter Protection:
- Use self-contained breathing apparatus and full protective gear
- Use self-contained breathing apparatus and full protective gear
Related products
Cupric Oxide Extra Pure
Cupric Oxide Extra Pure is a black, fine powder extensively used in laboratory settings as a stable, high-purity source of copper in oxidation state +2. It is commonly applied in organic synthesis, inorganic reactions, and thermal decomposition studies, as well as in qualitative and quantitative analysis of copper. Its thermal stability also makes it suitable for ceramic glazing and as a precursor in catalyst preparation. This extra pure grade ensures low impurity levels, essential for accurate experimental results and reproducible data in both educational and research laboratories. It should be stored in a tightly sealed container away from moisture and strong acids.
Emulsifier ( Emulgator) NP-9
Emulsifier ( Emulgator) NP-9 is a nonionic surfactant belonging to the family of Nonylphenol Ethoxylates (NPEs), specifically with an average of 9 ethylene oxide (EO) units. It is widely used as an effective emulsifying, wetting, dispersing, and solubilizing agent. NP-9 is typically a pale yellow to amber viscous liquid, soluble in water and various organic solvents. It is valued for its strong emulsifying ability to stabilize oil-in-water (O/W) and water-in-oil (W/O) emulsions, excellent detergency, and good compatibility with other surfactants and formulation ingredients. NP-9 is commonly employed in industrial, agricultural, cosmetic, pharmaceutical, and cleaning applications.
Glycerol Monostearate
Glycerol Monostearate is a white to off-white, free-flowing powder composed of 50% monoglycerides of stearic and palmitic acids, typically derived from vegetable oils. It is a non-ionic emulsifier widely used in food, cosmetics, pharmaceuticals, plastics, and industrial applications. GMS functions as an emulsifying agent, stabilizer, thickener, anti-staling agent, and opacifier. In food, it improves texture and extends shelf life. In cosmetics and pharmaceuticals, it enhances creaminess and stability. GMS 50% is often blended with other emulsifiers or surfactants and is valued for its versatile functionality, safety, and compatibility with a wide range of ingredients.
Glycerol Monostearate Flakes
Glycerol Monostearate Flakes is a white to off-white waxy flake form emulsifier composed of 40% monoglycerides of fatty acids, primarily stearic and palmitic acids, combined with other glycerides and esters. Derived mainly from vegetable oils, this food-grade emulsifier is widely utilized in food, cosmetic, pharmaceutical, and industrial sectors for its multifunctional properties. GMS 40% flakes serve as effective emulsifiers, stabilizers, anti-caking agents, and texture enhancers, with excellent compatibility and versatility in formulations requiring semi-solid or solid fats.
Magnesium Oxide Heavy Extra Pure
Magnesium Oxide Heavy Extra Pure is a high-purity, dense white powder prized for its excellent thermal stability, high melting point, and chemical inertness. It is widely used in laboratory applications as a standard reagent, pH adjuster, and desiccant. In pharmaceuticals, it functions as an antacid and a magnesium supplement, while in industrial processes, it is essential for producing refractory materials, ceramics, and insulating products due to its high heat resistance. The "heavy" form refers to its higher bulk density, making it particularly useful in applications where volume constraints are critical. Its extra pure grade ensures it meets the stringent demands of high-precision research and formulation work.
Magnesium Oxide Light Powder Extra Pure
Magnesium Oxide Light Powder Extra Pure is a fine, white, odorless powder with a lower bulk density compared to the heavy grade, offering high surface area and excellent reactivity. It is widely used in analytical laboratories, pharmaceuticals, and cosmetics due to its purity and gentle chemical behavior. In pharmaceutical formulations, it acts as an antacid and magnesium supplement, while in cosmetics, it is used for its absorbent and pH-adjusting properties. Its light, fluffy texture also makes it ideal for use in rubber, plastics, and coatings as a filler, stabilizer, or neutralizing agent. The extra pure grade ensures consistent quality for precise and sensitive applications.
Marlophen NP9
Marlophen NP9 is a nonionic surfactant based on alkylphenol ethoxylates, widely used as a wetting agent, emulsifier, and detergent in various industrial and agricultural applications. It offers excellent compatibility with a range of chemicals and demonstrates strong emulsifying and dispersing properties. Marlophen NP9 enhances the performance of formulations such as pesticides, cleaning agents, and textile auxiliaries by improving spreading, penetration, and stability. It is valued for its ability to reduce surface tension and increase solubility of active ingredients in aqueous systems.
Polyglycerol-10-Laurate Extra Pure
Polyglycerol-10-laurate Extra Pure is a high-purity, non-ionic surfactant and emulsifier composed of ten glycerol units esterified with lauric acid. This versatile compound is especially valued in cosmetic, pharmaceutical, and food-grade applications where ultra-high purity and biocompatibility are critical.
Known for its excellent emulsifying, dispersing, and solubilizing properties, Polyglycerol-10-laurate is widely used in formulations for creams, lotions, and other personal care products, particularly those designed for sensitive skin. In pharmaceuticals, it aids in enhancing bioavailability and improving the stability of active ingredients, while in food applications, it serves as a safe emulsifier and texturizer, often used in dairy and confectionery products.
