Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Ammonium Molybdate Extra Pure
Original price was: $ 18.00.$ 17.76Current price is: $ 17.76.
Ammonium Molybdate Extra Pure, typically supplied as tetrahydrate ((NH4)6Mo7O24⋅4H2O), is a high-purity, white crystalline compound widely used in laboratory chemistry for analytical, inorganic, and materials science applications. It is most notably used in colorimetric analysis for detecting phosphates, silicates, and arsenates through the formation of characteristic molybdenum blue complexes. In catalysis and coordination chemistry, it serves as a precursor for molybdenum-based compounds and materials. Its extra pure grade ensures high accuracy and reproducibility in sensitive assays and research procedures. Ammonium molybdate should be stored in a tightly sealed container in a cool, dry place, protected from light and moisture to maintain its stability and effectiveness.
Ammonium Molybdate Extra Pure
Primary Uses
- Reagent in Phosphate Analysis (Colorimetric Test)
- Widely used in the molybdenum blue method to detect and quantify phosphate (PO₄³⁻) in water, soil, and food samples.
- Reagent for Silicate and Arsenate Detection
- Forms colored complexes with silicates and arsenates, allowing spectrophotometric or visual identification.
- Precursor in the Synthesis of Molybdenum Compounds
- Serves as a starting material for producing molybdenum oxides, catalysts, and coordination complexes.
- Catalyst Component in Laboratory-Scale Oxidation Reactions
- Acts as a heteropoly acid precursor or support material in oxidative catalysis research.
- Educational Demonstrations of Polyatomic Ion Chemistry
- Used to illustrate the behavior of polyoxometalates and large anionic structures in advanced chemistry classes.
Secondary Uses
- Chromogenic Agent in Clinical Chemistry Kits
- Found in diagnostic assays for phosphate and nucleotides in blood and urine analysis.
- Study of Molybdenum Redox Chemistry
- Involved in research on Mo⁶⁺ ↔ Mo⁵⁺/Mo⁴⁺ redox cycling, useful in coordination chemistry and material science.
- Corrosion and Metal Surface Treatment Research
- Used in the lab as a corrosion inhibitor model, particularly for steel and aluminum alloys.
- Crystal Growth and Solid-State Chemistry
- Studied for its crystallization behavior and phase transitions in molybdenum-based materials.
- Component in Heteropoly Acid Studies
- Participates in forming Keggin-type anions and other polyoxometalate structures, relevant to catalysis and supramolecular chemistry.
| PACK SIZE | 100 grams Plastic Tin |
|---|
1. Basic Identification Attributes
- Chemical Name: Ammonium Molybdate
- CAS Number: 13106-76-8 (tetrahydrate)
- HS Code: 28417000 (Molybdates; of ammonium or other metals)
- Molecular Formula: (NH₄)₆Mo₇O₂₄·4H₂O (commonly tetrahydrate)
- Synonyms:
- Ammonium heptamolybdate
- Ammonium molybdate tetrahydrate
- Heptamolybdic acid, hexammonium salt
- Ammonium paramolybdate
2. Physical & Chemical Properties
- Physical State: Solid (crystalline powder)
- Color & Odor: White to slightly green crystals; odorless
- Boiling Point: Decomposes
- Melting Point: Decomposes at ~190–200°C (releases ammonia and water)
- Density/Specific Gravity: ~2.498 g/cm³
- Solubility:
- Water: Soluble (~40 g/100 mL at 20°C)
- Alcohol: Insoluble
- pH Level: ~5.0–6.0 (5% aqueous solution)
- Vapor Pressure: Negligible
- Flash Point: Not flammable
- Autoignition Temperature: Not applicable
- Viscosity: Not applicable
3. Safety & Hazard Attributes
- Hazard Class (GHS):
- Eye Irritation (Category 2A)
- Skin Irritation (Category 2)
- Acute Toxicity – Oral (Category 4)
- Specific Target Organ Toxicity – Repeated Exposure (Category 2, liver and kidneys)
- NFPA Ratings:
- Health: 2
- Flammability: 0
- Reactivity: 0
- Exposure Limits:
- OSHA PEL (as soluble molybdenum): 5 mg/m³
- ACGIH TLV: 0.5 mg/m³ (inhalable fraction, TWA)
- Reactivity:
- Stable under normal lab conditions
- Incompatible with strong reducing agents
4. Storage & Handling Attributes
- Storage Conditions:
- Store in tightly sealed containers in a cool, dry place
- Avoid exposure to heat and moisture
- Incompatible Materials:
- Strong acids and reducing agents (e.g., aluminum, magnesium, hydrides)
- Container Type:
- Plastic or amber glass jars
- Shelf Life & Expiration Date:
- ~2–3 years when stored dry
- Special Handling Requirements:
- Use gloves and eye protection
- Avoid dust inhalation; handle in fume hood if necessary
5. Regulatory & Compliance Attributes
- Regulatory Status:
- Listed under TSCA and REACH
- Considered hazardous under some local regulations due to heavy metal content
- Transportation Restrictions:
- Not classified as hazardous for transport in standard lab quantities
- Waste Disposal Method:
- Collect for heavy metal waste disposal
- Do not dispose in sinks or drains
6. Environmental & Health Impact
- Ecotoxicity:
- Harmful to aquatic organisms in large quantities
- Persistence in Environment:
- Molybdenum compounds are persistent and bioaccumulative
- Carcinogenicity/Mutagenicity:
- Not classified as carcinogenic
- Biodegradability:
- Inorganic; not biodegradable, accumulates in soil and water
SAFETY PRECAUTIONS
- Personal Protective Equipment (PPE):
- Wear a lab coat, chemical-resistant gloves (e.g., nitrile), and safety goggles.
- Use a fume hood or ensure adequate ventilation—avoid inhalation of dust.
- Handling:
- Avoid inhalation, ingestion, and skin or eye contact.
- Handle in a manner that minimizes dust formation.
- Keep away from acids (may release toxic molybdenum oxides) and reducing agents.
- Storage:
- Store in a tightly closed container in a cool, dry, well-ventilated area.
- Protect from moisture—compound may degrade upon prolonged exposure.
- Keep away from incompatible materials like strong acids and oxidizers.
- Hygiene Measures:
- Wash hands thoroughly after use.
- Clean work surfaces after handling.
- Avoid eating, drinking, or smoking while handling the chemical.
FIRST AID MEASURES
- Inhalation:
- Move person to fresh air.
- If breathing is difficult, administer oxygen.
- Seek medical attention if symptoms such as coughing or shortness of breath develop.
- Skin Contact:
- Remove contaminated clothing.
- Wash affected skin with plenty of soap and water.
- Get medical advice if irritation develops.
- Eye Contact:
- Rinse immediately with plenty of water for at least 15 minutes.
- Hold eyelids apart and remove contact lenses if present.
- Seek immediate medical attention.
- Ingestion:
- Rinse your mouth thoroughly with water.
- Do not induce vomiting unless instructed by medical personnel.
- Give water to dilute (if the person is fully conscious).
- Seek medical attention immediately—molybdenum salts may cause gastrointestinal irritation and systemic effects.
FIRE FIGHTING MEASURES
- Suitable Extinguishing Media:
- Use dry chemical, CO₂, foam, or water spray depending on surrounding fire conditions.
- Specific Hazards:
- Ammonium molybdate is non-combustible, but heating may cause decomposition, releasing:
- Ammonia
- Nitrogen oxides (NOₓ)
- Molybdenum oxides (MoO₃) — which are toxic.
- Ammonium molybdate is non-combustible, but heating may cause decomposition, releasing:
- Protective Equipment for Firefighters:
- Wear self-contained breathing apparatus (SCBA) and full protective clothing.
- Firefighting Instructions:
- Avoid inhalation of fumes or decomposition products.
- Use water spray to cool fire-exposed containers.
- Prevent runoff from contaminating drains—toxic to aquatic life in large quantities.
Related products
Acetone Extra Pure
Acetone Extra Pure is a highly volatile, flammable, and colorless liquid widely used as a powerful solvent in laboratory and industrial applications. Known for its exceptional ability to dissolve a wide range of substances, it is commonly employed for cleaning laboratory glassware, thinning resins, and removing organic residues. In the cosmetics and pharmaceutical industries, acetone is used in nail polish removers and formulation processes. Its high evaporation rate and purity make it suitable for analytical procedures and synthesis work, especially where contaminant-free solvents are essential. With a distinct odor and low boiling point, Acetone Extra Pure is an indispensable reagent for both routine and specialized chemical operations.
Alizarin Extra Pure
Alizarin Extra Pure is a high-grade anthraquinone-based dye, presented as a reddish-brown crystalline powder, renowned for its vivid coloration and strong affinity for metal ions. It is primarily used in analytical chemistry as a complexometric indicator, especially for detecting aluminum, calcium, and other metal ions through color change. Due to its exceptional purity, it is also employed in histological staining, textile research, and pigment synthesis where precision and consistency are critical. Alizarin Extra Pure offers excellent stability and intense coloration, making it ideal for scientific, educational, and specialized industrial applications. Proper storage in a cool, dry environment is essential to maintain its effectiveness and prevent degradation.
Aluminium Carbonate Extra Pure
Aluminium Carbonate Extra Pure is a high-purity, white, odorless powder primarily used as a reagent in laboratory settings for analytical and research applications. Though not commonly stable under standard conditions, it is valued in controlled experimental procedures involving the study of aluminum compounds, buffer systems, and inorganic reactions. Its extra pure grade ensures low levels of contaminants, making it suitable for precise qualitative and quantitative analysis. Due to its sensitivity to moisture and tendency to decompose into aluminum hydroxide and carbon dioxide, it must be handled with care and stored in airtight containers under dry conditions to maintain chemical integrity during laboratory use.
Aluminium Ferric Sulphate Extra Pure
Aluminium Ferric Sulphate Extra Pure is a high-purity, yellowish to light brown crystalline solid composed of aluminum, iron, and sulfate ions, commonly used in laboratory settings for analytical, coordination, and inorganic chemistry research. Its dual-metal composition makes it valuable for studying metal ion interactions, flocculation processes, and as a reagent in qualitative analysis of phosphates and tannins. The compound also finds application in preparing standard solutions and in experiments related to coagulation and sedimentation. Its extra pure grade ensures consistent performance with minimal contamination, making it ideal for precise, controlled experimentation. It should be stored in tightly sealed containers in a dry, cool environment to maintain stability and prevent moisture uptake.
Aluminium Nitrate Extra Pure
Aluminium Nitrate Extra Pure is a high-purity, white crystalline compound that is highly soluble in water and widely used in laboratory chemistry for analytical, synthesis, and research purposes. It serves as a reliable source of aluminum ions in solution, making it valuable in qualitative analysis, coordination chemistry, and materials science studies. This compound is often utilized in the preparation of other aluminum salts, as a nitrating agent, and in controlled oxidation reactions. Its extra pure grade guarantees minimal interference from contaminants, ensuring accurate, reproducible results in sensitive experimental work. Aluminium Nitrate should be stored in tightly sealed containers, away from moisture and incompatible substances, due to its oxidizing nature and hygroscopicity.
Ammonia Solution Extra Pure
Ammonia Solution Extra Pure is a high-purity, clear, colorless liquid composed of ammonia gas dissolved in water, emitting a strong, characteristic pungent odor. Widely used in laboratory chemistry, it serves as a crucial reagent in acid-base titrations, complexometric analysis, and the preparation of ammonium salts and metal-ammonia complexes. Its alkaline nature makes it valuable for pH adjustment, cleaning of laboratory glassware, and as a reducing agent in certain analytical procedures. The extra pure grade ensures low levels of impurities, supporting reliable results in sensitive experimental work. Due to its volatility and corrosiveness, it should be handled in well-ventilated areas and stored in tightly sealed, chemically resistant containers.
Ammonium Acetate Extra Pure
Ammonium Acetate Extra Pure is a high-purity, white crystalline solid that is highly soluble in water and commonly used as a buffer component in laboratory and analytical chemistry. It is especially valuable in high-performance liquid chromatography (HPLC), mass spectrometry, and biochemical assays where pH control and minimal ionic interference are essential. This compound also serves as a reagent in organic synthesis, particularly in the preparation of acetamides and other nitrogen-containing compounds. Its extra pure grade ensures excellent consistency, low contaminant levels, and compatibility with sensitive instrumentation. To maintain stability and prevent moisture absorption, it should be stored in a tightly sealed container in a cool, dry environment.
Ammonium Carbonate Extra Pure
Ammonium Carbonate Extra Pure is a high-quality, white crystalline solid widely used across various scientific, industrial, and food-related applications. Manufactured to stringent purity standards, this compound is ideal for laboratories and processes that demand high-grade reagents. With its characteristic ammonia-like odor and ability to decompose upon heating, ammonium carbonate plays a versatile role in both chemical reactions and physical processes.
In aqueous solution, ammonium carbonate breaks down into ammonium bicarbonate and ammonium carbamate, further releasing ammonia (NH₃) and carbon dioxide (CO₂) upon heating. This property makes it especially useful in applications that require controlled gas release or temporary pH modification.
