Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Corn Starch Industrial Grade
Original price was: $ 1.67.$ 1.55Current price is: $ 1.55.
Corn Starch Industrial Grade is a finely milled, white powder derived from the endosperm of maize (Zea mays). Unlike food-grade starch, industrial grade is tailored for non-food applications where its thickening, adhesive, and film-forming properties are exploited. It consists primarily of amylose and amylopectin polysaccharides and is valued for its biodegradability, renewability, and cost-effectiveness. Industrial corn starch is used extensively as a raw material or functional additive across a wide variety of manufacturing processes, including paper, textiles, adhesives, and packaging industries.
Corn Starch Industrial Grade
Primary UsesÂ
- Paper Industry
- Acts as a surface sizing agent to improve paper strength, gloss, and printability.
- Used in coating formulations to enhance smoothness and reduce porosity.
- Serves as a binding agent in recycled paper production to improve fiber bonding.
- Adhesives & Binders
- Used in manufacturing starch-based adhesives for corrugated cardboard, paper bags, and labels.
- Serves as a binder in particleboard, fiberboard, and plywood production.
- Textile Industry
- Employed as a sizing agent to strengthen yarns during weaving, improving fabric quality and reducing breakage.
- Used in finishing processes for fabric stiffening and texture enhancement.
- Bioplastics & Packaging
- Used as a biodegradable polymer base for producing eco-friendly packaging materials and films.
- Serves as a filler and functional additive in bioplastic blends to improve mechanical properties.
Secondary UsesÂ
- Pharmaceuticals
- Acts as an excipient in tablet formulation, primarily as a disintegrant and binder (non-food grade applications).
- Construction
- Used as a dust control agent in construction sites and as a binder in gypsum and cement formulations.
- Cosmetics & Personal Care
- Utilized as a thickener and absorbent in powders and creams (industrial formulations).
- Agriculture
- Used as a carrier for pesticides and fertilizers in controlled release formulations.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Poly-D-glucopyranose (starch)
- Common/Trade Name: Corn Starch Industrial Grade
- CAS Number: 9005-25-8
- HS Code: 1108.12.00
- Molecular Formula: (C6H10O5)n (polysaccharide)
- Synonyms:
- Maize starch
- Industrial maize starch
2. Physical & Chemical Properties
- Physical State: Fine white powder
- Color & Odor: White; odorless
- Melting Point: Decomposes before melting
- Boiling Point: Not applicable
- Density: Approximately 1.5 g/cm³ (bulk density)
- Solubility: Insoluble in cold water; swells in hot water forming a paste
- pH (1% solution): 4.5 - 7.0
- Gelatinization Temperature: 62–72°C
- Stability: Stable under dry conditions; moisture sensitive
3. Safety & Hazard Attributes
- Hazard Class (GHS): Generally safe; combustible dust hazard
- NFPA Ratings:
- Health: 0
- Flammability: 1
- Reactivity: 0
- Exposure Limits: No specific OSHA PEL; avoid inhalation of dust
- Toxicity: Non-toxic, non-irritant
- Reactivity: Inert under normal conditions
4. Storage & Handling Attributes
- Storage Conditions: Store in a dry, cool, well-ventilated area away from moisture and ignition sources
- Container Type: Industrial-grade sealed bags or bulk containers
- Shelf Life: 1–2 years if properly stored
- Special Handling: Avoid dust formation and ignition sources; use dust masks if necessary
5. Regulatory & Compliance Attributes
- FDA Status: Not intended for food use; industrial application only
- REACH Status: Registered as industrial chemical
- Transportation: Not classified as hazardous; handle as combustible dust
- Waste Disposal: Dispose according to local industrial waste regulations
6. Environmental & Health Impact
- Ecotoxicity: Low environmental impact; biodegradable
- Persistence: Biodegradable in soil and water
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not carcinogenic or mutagenic
- Biodegradability: Readily biodegradable
Safety Handling Precautions
Personal Protective Equipment (PPE):
- Dust mask or respirator
- Safety goggles if airborne dust present
- Protective gloves (optional)
Handling Measures:
- Avoid dust inhalation
- Use adequate ventilation
- Prevent moisture contamination
Storage Measures:
- Keep containers tightly sealed
- Store away from ignition sources and oxidizers
Hygiene Practices:
- Wash hands after handling
- Avoid eating, drinking, or smoking during handling
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms persist
- Skin Contact: Wash with soap and water if irritation occurs
- Eye Contact: Flush eyes with water if dust causes irritation
- Ingestion: Not toxic; consult physician if large amounts ingested
Firefighting Measures
- Fire Hazards: Combustible dust; dust clouds may ignite or explode
- Extinguishing Media: Use water spray, foam, dry chemical, or COâ‚‚
- Special Precautions: Avoid dust dispersion; wear full protective gear and respiratory protection
- Decomposition Products: Carbon oxides and water vapor
Related products
Calcium Carbonate Filler
Calcium Carbonate Filler is a high-quality, uncoated ground calcium carbonate (GCC) specially engineered for use as a filler in polyethylene (PE) and other polyolefin resins. This grade of calcium carbonate is designed to enhance the physical and mechanical properties of plastics while providing cost-effective bulk and improved processing. It is a fine, white, odorless powder with excellent brightness, high purity, and uniform particle size distribution. Its use improves stiffness, impact resistance, dimensional stability, and surface finish in polyethylene applications such as films, sheets, pipes, and molded parts.
Calcium Carbonate Heavy
Calcium Carbonate Heavy is a high-density, finely ground, natural mineral primarily composed of calcium carbonate (CaCO₃). Known for its higher bulk density compared to regular grades, this filler is widely used in applications requiring enhanced weight, opacity, and strength. It is commonly employed as a functional filler and extender in industries such as plastics, paints, coatings, adhesives, rubber, paper, and construction materials. Its inert nature, whiteness, and particle size distribution make it suitable for improving mechanical properties and surface finish, while also offering cost efficiency by replacing more expensive raw materials.
Calcium Carbonate Light
Calcium Carbonate Light is a finely ground, low bulk density natural mineral composed primarily of calcium carbonate (CaCO₃). Compared to standard grades, it has a lower density and larger particle size distribution, making it suitable for applications where light weight and high brightness are important. This form is extensively used as a filler and extender in industries such as plastics, paints, rubber, paper, adhesives, and construction materials to improve opacity, brightness, and texture, while maintaining low weight and cost efficiency. Its chemical inertness and whiteness provide functional and aesthetic advantages across formulations.
Calcium Carbonate Uncoated
Calcium Carbonate Uncoated is a naturally occurring mineral compound composed primarily of calcium, carbon, and oxygen with the chemical formula CaCO₃. It appears as a fine white powder or granules, widely used as a filler, pigment, and functional additive across various industries. The uncoated form means the calcium carbonate particles are not surface-treated, retaining their natural properties. It is valued for its high brightness, whiteness, and excellent compressibility. Uncoated calcium carbonate is used to enhance opacity, improve processing, and reduce costs in plastics, paints, coatings, adhesives, rubber, paper, and construction materials.
Polymer Fiber
Polymer Fiber refers to a wide range of synthetic fibers made from polymer materials such as polypropylene, polyester, nylon, polyethylene, and acrylics. These fibers are engineered for high tensile strength, durability, flexibility, and resistance to chemicals and moisture. Polymer fibers are widely used in construction, textiles, filtration, composites, and industrial applications to improve mechanical properties, enhance structural integrity, and provide specialized functional benefits.
Polywhite B
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
Sodium Sulphate Anhydrous
Sodium Sulphate Anhydrous (Naâ‚‚SOâ‚„) is a white crystalline powder, odorless and highly soluble in water. Unlike the decahydrate form (Glauber's salt), this anhydrous grade contains minimal water content, making it ideal for industrial applications requiring low moisture levels. Supplied in 25kg packaging, it is widely used as a filler, drying agent, and raw material in detergents, glass manufacturing, pulp and paper, and chemical synthesis. Its excellent stability, non-hygroscopic nature, and cost-effectiveness make it an essential bulk chemical.
