Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-28%
Formalin
Original price was: $ 2.00.$ 1.44Current price is: $ 1.44.
Whatsapp Order
Formalin Formaldehyde is an aqueous solution containing approximately 37% formaldehyde by weight, stabilized typically with 10-15% methanol to prevent polymerization. It is a clear, colorless liquid with a pungent, penetrating odor. Formaldehyde is a simple aldehyde widely used as a disinfectant, preservative, and chemical intermediate. Formalin’s powerful antimicrobial and tissue-fixation properties make it essential in medical, laboratory, industrial, and manufacturing applications. It is one of the most commonly used chemicals worldwide for sterilization, embalming, and resin production.
Description
Formalin (Formaldehyde)
Primary Uses
- Medical and Laboratory
- Used extensively as a tissue fixative in histology, pathology, and anatomical studies to preserve biological specimens by cross-linking proteins and halting decay.
- Employed in embalming fluids to preserve human and animal remains.
- Used for sterilizing surgical instruments and disinfecting medical equipment and laboratories.
- Industrial Applications
- Key raw material in the manufacture of resins such as urea-formaldehyde, phenol-formaldehyde, and melamine-formaldehyde resins used in adhesives, laminates, plywood, and particleboard.
- Used as a fumigant and disinfectant in industrial sanitation and preservation.
- Utilized in the production of plastics, coatings, textiles, and paper treatments.
- Agriculture
- Used as a fungicide, bactericide, and pesticide in controlled applications.
- Applied to disinfect soil and farming equipment to control pathogens.
- Water Treatment
- Employed as a biocide in cooling towers, wastewater treatment, and industrial water systems to control microbial growth.
- Cosmetics and Consumer Products
- Used in very low concentrations as a preservative in cosmetic formulations (regulated due to toxicity concerns).
Secondary Uses
- Research and Analytical Chemistry
- Used as a standard reagent in chemical synthesis and analytical tests.
- Involved in polymerization reactions and cross-linking in biochemical applications.
- Textile Industry
- Applied in wrinkle-resistant and crease-proof finishing agents for fabrics.
- Waste Management
- Utilized in stabilization of sewage sludge and waste products to reduce pathogens and odors.
PRODUCT KEY FEATURES
- Basic Identification Attributes
- Chemical Name (IUPAC): Methanal
- Common/Trade Name: Formalin, Formaldehyde Solution
- CAS Number: 50-00-0
- HS Code: 2912.11
- Molecular Formula: CH2O
- Synonyms: Formaldehyde solution, Methylene glycol (in solution), Methanal
- Physical & Chemical Properties
- Physical State: Clear liquid
- Color & Odor: Colorless; strong pungent, irritating odor
- Boiling Point: ~100 °C (aqueous solution)
- Density: ~1.08 g/cm³
- Solubility: Completely miscible with water; soluble in alcohol and ether
- pH: Slightly acidic to neutral (4-7) depending on concentration
- Stability: Stable under cool, dark conditions; polymerizes upon prolonged storage or exposure to heat and light without stabilizer
- Safety & Hazard Attributes
- Hazard Class (GHS): Flammable liquid (Category 3), Acute toxicity, Skin corrosion/irritation, Serious eye damage/irritation, Carcinogenicity (Category 1B)
- Toxicity: Highly toxic by inhalation, ingestion, and skin absorption
- Exposure Limits: OSHA PEL: 0.75 ppm (8-hr TWA), NIOSH REL: 0.016 ppm (ceiling)
- Storage & Handling Attributes
- Storage Conditions: Store in tightly closed containers in a cool, well-ventilated area away from heat and ignition sources
- Container Type: Corrosion-resistant steel or plastic containers with vapor-tight seals
- Shelf Life: Typically 1-2 years if stored properly
- Handling Precautions: Use explosion-proof equipment; avoid vapor inhalation and direct contact; use personal protective equipment
- Regulatory & Compliance Attributes
- Subject to strict regulations worldwide due to toxicity and carcinogenicity
- Listed as a hazardous substance by OSHA, EPA, REACH, and other authorities
- Usage limits and occupational exposure strictly controlled
- Environmental & Health Impact
- Biodegradability: Readily biodegrades in the environment under aerobic conditions
- Ecotoxicity: Toxic to aquatic life with long-lasting effects
- Bioaccumulation: Not expected to bioaccumulate significantly
- Carcinogenicity/Mutagenicity: Classified as a human carcinogen (IARC Group 1) with mutagenic potential
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Full protective clothing, chemical-resistant gloves, safety goggles, face shield, and respiratory protection with formaldehyde cartridges or supplied air
- Handling Guidelines: Work in well-ventilated or exhaust-controlled areas; avoid inhalation and skin contact; no open flames or sparks nearby
- Storage Measures: Store away from oxidizing agents, strong acids, and alkalis; keep containers sealed and upright
- Hygiene Practices: Wash hands and exposed skin thoroughly after handling; no eating, drinking, or smoking in work areas
- First Aid Measures
- Inhalation: Move affected person to fresh air immediately; provide oxygen or artificial respiration if necessary; seek urgent medical care
- Skin Contact: Remove contaminated clothing; wash affected skin with plenty of water and soap; seek medical attention if irritation or burns occur
- Eye Contact: Rinse eyes with plenty of water for at least 15 minutes; obtain immediate medical attention
- Ingestion: Do NOT induce vomiting; rinse mouth; seek immediate medical help
- Firefighting Measures
- Fire Hazards: Flammable liquid; vapors can form explosive mixtures with air; emits toxic gases (formaldehyde, carbon monoxide) on burning
- Extinguishing Media: Use alcohol-resistant foam, dry chemical, carbon dioxide (CO₂), or water spray
- Special Precautions: Firefighters must wear self-contained breathing apparatus and full protective gear
- Decomposition Products: Formaldehyde, carbon monoxide, carbon dioxide, and other toxic gases
Related products
Ammonia solution
Ammonia solutions, often referred to as aqueous ammonia or ammonium hydroxide, are clear, colorless liquids consisting of ammonia gas dissolved in water. The concentration of ammonia in these solutions typically ranges from 5% to 35% by weight. Ammonia solutions possess a pungent odor characteristic of ammonia gas and are alkaline with a pH typically between 11 and 12.5. This solution is widely used across various industries due to its excellent cleaning properties, reactivity, and role as a nitrogen source.
Calcium Hypochlorite Chlorine
Calcium Hypochlorite Chlorine is a white to slightly yellow crystalline powder or granules known for its strong oxidizing and disinfectant properties. The 65% grade indicates the available chlorine content, making it a powerful bleaching, sanitizing, and oxidizing agent. It is commonly used for water treatment, sanitation, and as a bleaching agent in industrial and household applications. Calcium Hypochlorite dissolves in water to release hypochlorous acid, which effectively kills bacteria, viruses, and fungi.
Cupric Sulphate Anhydrous
Cupric Sulphate Anhydrous (Copper(II) sulfate, anhydrous form) is a blue to green crystalline powder that is highly soluble in water. It is an inorganic compound consisting of copper, sulfur, and oxygen with the formula CuSO₄. Unlike its hydrated counterpart (CuSO₄·5H₂O), the anhydrous form contains no water molecules. It is widely used in agriculture, industry, and chemical manufacturing due to its fungicidal, algicidal, and chemical reactivity properties. The compound serves as a precursor to many copper salts and catalysts.
Cupric Sulphate Pentahydrate
Cupric Sulphate Pentahydrate (Copper(II) sulfate pentahydrate) is a bright blue crystalline solid with the chemical formula CuSO₄·5H₂O. It is the hydrated form of copper sulfate and is highly soluble in water. This compound is widely used in agriculture, chemical manufacturing, and laboratory applications due to its fungicidal, algicidal, and micronutrient properties. The pentahydrate form is the most common and commercially available, known for its vivid blue color and versatile reactivity.
Industrial Salt
Industrial Salt, chemically known as Sodium Chloride (NaCl), is a high-purity crystalline compound widely used across industrial, chemical, agricultural, and water treatment applications. It appears as white to off-white crystalline granules or powder, depending on the grade and particle size. Industrial Salt is an essential raw material in numerous chemical processes, including chlor-alkali production, de-icing, textile dyeing, and water softening. Its versatility and cost-effectiveness make it indispensable in large-scale operations.
Sodium Hypochlorite
Sodium Hypochlorite 10-12% (commonly known as Jik) is a clear to pale greenish-yellow liquid with a strong chlorine odor. It is a widely used disinfectant and bleaching agent, known for its powerful oxidizing properties. This grade is commonly employed in household cleaning, water treatment, and industrial sanitation processes. It is effective against a broad spectrum of microorganisms, making it a popular choice for disinfection and sterilization.
Sodium Thiosulphate
Sodium Thiosulphate (Na₂S₂O₃) is a white, crystalline, odorless powder or granular solid highly soluble in water. This 25kg packaged chemical is widely used in photographic processing, water treatment, chemical synthesis, and medicine. Known for its reducing and complexing properties, it acts as an effective dechlorinating agent and fixer in photography by dissolving silver halides. It is stable under normal conditions and easily handled for industrial and laboratory applications.
