Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
LLDPE Roto T3804U MFI/MFR
Whatsapp Order
LLDPE Roto T3804U MFI/MFR is a linear low-density polyethylene resin designed specifically for rotational molding applications. It offers excellent melt flow characteristics (MFI/MFR) that facilitate even melting and smooth flow in the mold, producing parts with uniform thickness and good mechanical properties. This grade provides superior impact strength, flexibility, and chemical resistance, making it ideal for manufacturing large hollow items such as tanks, containers, and playground equipment. Its tailored flow properties enable high-quality surface finishes and improved production efficiency in roto molding processes.
Description
LLDPE Roto T3804U MFI/MFR
Primary Uses
- Rotational Molding
- Widely used in producing large hollow and complex-shaped items like water tanks, chemical storage containers, and industrial bins.
- Ensures even material distribution and high-quality surface finish in roto molded products.
- Industrial Containers
- Suitable for manufacturing chemical-resistant containers, drums, and bins that require durability and impact resistance.
- Agricultural and Outdoor Equipment
- Used for roto molding components like seeders, tanks, and playground equipment due to its toughness and weather resistance.
Secondary Uses
- Recreational Products
- Utilized for manufacturing kayaks, coolers, and other outdoor recreational goods that benefit from toughness and light weight.
- Custom Fabrication
- Employed in specialized molded parts requiring precise control over thickness and mechanical performance.
- Automotive Applications
- Occasionally used for large, hollow automotive components and protective casings where roto molding is preferred.
PRODUCT KEY FEATURES
- Basic Identification Attributes
- Chemical Name (IUPAC): Polyethylene, linear low-density
- Common/Trade Name: LLDPE Roto T3804U
- CAS Number: 9002-88-4
- HS Code: 3901.20.00
- Synonyms: Linear low-density polyethylene resin; LLDPE resin; Rotomolding grade LLDPE
- Physical & Chemical Properties
- Physical State: Powder or granular resin suitable for rotational molding
- Color & Odor: Natural (translucent or white); odorless
- Melt Flow Index (MFI/MFR): Typically 3-7 g/10 min (specific to grade)
- Density: Approx. 0.92 g/cm³
- Mechanical Properties: High impact strength, good flexibility
- Processing Temperature: Rotational molding range 230–280°C
- Safety & Hazard Attributes
- GHS Classification: Not hazardous under normal handling and use
- Toxicity: Non-toxic, inert polymer
- Exposure Limits: No specific occupational exposure limits; follow standard industrial hygiene
- Storage & Handling Attributes
- Storage Conditions: Store in dry, cool, and well-ventilated areas away from moisture and sunlight
- Container Type: Packaged in sealed bags or boxes on pallets
- Shelf Life: Stable for multiple years if stored correctly
- Handling Precautions: Minimize dust generation; avoid contamination
- Regulatory & Compliance Attributes
- Complies with applicable food contact and chemical safety regulations (FDA, EU) where relevant
- Meets REACH, RoHS, and other environmental safety standards
- Environmental & Health Impact
- Biodegradability: Non-biodegradable but recyclable through conventional polyethylene recycling streams
- Ecotoxicity: Low environmental toxicity when properly managed
- Bioaccumulation: Not applicable
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Gloves and dust mask recommended during handling of large quantities
- Handling Guidelines: Use adequate ventilation to avoid inhalation of dust
- Storage Measures: Keep containers tightly closed and dry
- First Aid Measures
- Inhalation: Move to fresh air if dust causes irritation
- Skin Contact: Wash skin with soap and water if irritation occurs
- Eye Contact: Rinse eyes thoroughly with water if dust causes irritation
- Ingestion: Not applicable
- Firefighting Measures
- Fire Hazards: Combustible solid; emits dense smoke when burned
- Extinguishing Media: Water spray, foam, dry chemical, or carbon dioxide
- Special Precautions: Avoid inhalation of combustion fumes
- Hazardous Combustion Products: Carbon monoxide, carbon dioxide, hydrocarbons
Related products
Emulsifier (Emulgator)
Emulsifier is a nonionic surfactant belonging to the family of Nonylphenol Ethoxylates (NPEs), specifically with an average of 9 ethylene oxide (EO) units. It is widely used as an effective emulsifying, wetting, dispersing, and solubilizing agent. NP-9 is typically a pale yellow to amber viscous liquid, soluble in water and various organic solvents. It is valued for its strong emulsifying ability to stabilize oil-in-water (O/W) and water-in-oil (W/O) emulsions, excellent detergency, and good compatibility with other surfactants and formulation ingredients. NP-9 is commonly employed in industrial, agricultural, cosmetic, pharmaceutical, and cleaning applications.
Isopropyl Myristate
Isopropyl Myristate is a clear, colorless, and oily liquid ester formed by the reaction of isopropyl alcohol and myristic acid. It has a mild, pleasant odor and excellent spreading properties. IPM is widely used in cosmetics, pharmaceuticals, and industrial applications as an emollient, solvent, and penetration enhancer due to its ability to improve texture and absorption of topical formulations.
LLDPE film Opalene F20015
LLDPE film Opalene F20015 is a high-quality linear low-density polyethylene (LLDPE) film known for its excellent clarity, toughness, and flexibility. It is produced using linear low-density polyethylene resin, offering superior mechanical properties and puncture resistance compared to conventional low-density polyethylene films. Opalene F20015 is widely used in packaging applications where strength, transparency, and sealability are critical. Its balanced properties make it suitable for various industrial and consumer packaging needs.
LLDPE injection 6201XR
LLDPE injection 6201XR is a linear low-density polyethylene resin specially formulated for injection molding applications. It offers excellent processability, high impact strength, and good flexibility. The material provides a balance of mechanical performance and ease of molding, making it ideal for producing thin-walled and complex-shaped parts. With superior clarity and toughness, LLDPE Injection 6201XR is widely used in manufacturing durable consumer goods, automotive components, and packaging items.
PP Copolymer 37MK10
PP Copolymer 37MK10 is a polypropylene copolymer resin characterized by enhanced clarity, impact resistance, and flexibility compared to homopolymer polypropylene. This copolymer combines propylene with a small percentage of ethylene, resulting in improved toughness and processability. It is widely used in injection molding, extrusion, and film applications across various industries, offering excellent chemical resistance and durability.
PVC Resin 701
PVC Resin 701 is a high-quality suspension-grade polyvinyl chloride resin with a K-value of approximately 70–71, indicating high molecular weight. It is widely used in the production of flexible PVC products where excellent strength, elongation, and plasticizer absorption are required. PVC Resin 701 offers superior mechanical properties, high thermal stability, and good compatibility with plasticizers, making it suitable for calendaring, extrusion, and molding applications in diverse industries.
Styrene Polymer Copolymer (230kg)
Styrene Polymer Copolymer is a high-performance copolymer consisting primarily of styrene combined with other monomers such as acrylonitrile or butadiene, designed to offer enhanced mechanical properties, chemical resistance, and processability. Supplied in bulk packaging of 230kg, it is widely used in plastics, adhesives, coatings, and rubber industries. This copolymer provides excellent toughness, thermal stability, and versatility, making it suitable for demanding industrial applications.
