Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
PP Raffia RH03( Wooven)
PP Raffia RH03( Wooven) is a woven polypropylene fabric made from homopolymer polypropylene resin, designed for high strength, durability, and excellent dimensional stability. It is widely used in the manufacturing of woven sacks, bags, and other flexible packaging solutions. The woven structure enhances tear resistance and load-bearing capacity, making it suitable for industrial and agricultural packaging applications.
PP Raffia RH03( Wooven)
Primary Uses
- Packaging Industry
- Manufacturing of woven sacks and bags for bulk packaging of grains, fertilizers, chemicals, cement, and other commodities.
- Used for heavy-duty packaging applications requiring high tensile strength and durability.
- Agriculture
- Utilized in woven tarpaulins, ground covers, and soil stabilization fabrics.
- Employed in protective covers for crops and produce transport sacks.
- Construction
- Applied in geotextiles for erosion control, soil reinforcement, and drainage.
- Used in packaging of construction materials.
- Consumer Goods
- Production of reusable shopping bags and utility bags.
Secondary Uses
- Industrial Applications
- Used in filtration fabrics, industrial wrapping, and protective covers.
- Applied in cargo netting and load securing materials.
- Textile Industry
- Incorporated in manufacturing woven or laminated fabrics for household and industrial use.
- Transportation
- Used for protective packaging and tarpaulin covers.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Polypropylene homopolymer
- Common/Trade Name: PP Raffia RH03 (Woven)
- CAS Number: 9003-07-0
- HS Code: 3921.90 (Woven fabrics of plastics)
- Synonyms: Polypropylene woven raffia fabric; PP woven sacks material
2. Physical & Chemical Properties
- Physical State: Woven fabric (sheet form)
- Color & Odor: Natural or white; odorless
- Melting Point: Approximately 165–170°C
- Density: ~0.9 g/cm³
- Mechanical Properties: High tensile strength, excellent tear resistance
- Chemical Resistance: Resistant to acids, bases, and most solvents
3. Safety & Hazard Attributes
- GHS Classification: Not hazardous
- Toxicity: Non-toxic, inert polymer
- Exposure Limits: No specific limits; follow good industrial hygiene
4. Storage & Handling Attributes
- Storage Conditions: Store in a dry, cool, well-ventilated area away from direct sunlight
- Container Type: Rolls, bundles, or sheets
- Shelf Life: 1–3 years depending on storage conditions
- Handling Precautions: Avoid sharp objects that may damage fabric; use gloves when handling
5. Regulatory & Compliance Attributes
- Complies with applicable FDA and EU regulations for food contact (if applicable)
- Meets ASTM and ISO standards for polypropylene woven fabrics
6. Environmental & Health Impact
- Biodegradability: Non-biodegradable; recyclable
- Ecotoxicity: Low environmental impact if managed properly
- Bioaccumulation: Not significant
Safety Handling Precautions
- PPE Required: Gloves recommended to avoid cuts during handling
- Handling Guidelines: Avoid contact with sharp tools; handle rolls carefully
- Storage Measures: Store away from heat sources and moisture
First Aid Measures
- Inhalation: Not typically a concern; move to fresh air if irritation occurs from dust or fibers
- Skin Contact: Wash with soap and water if irritation or cuts occur
- Eye Contact: Rinse thoroughly if fibers or dust enter eyes
- Ingestion: Unlikely route; seek medical advice if accidental ingestion occurs
Firefighting Measures
- Fire Hazards: Combustible; burns producing dense smoke and toxic fumes
- Extinguishing Media: Water spray, foam, dry chemical, or CO₂
- Special Precautions: Use self-contained breathing apparatus in confined spaces
- Hazardous Combustion Products: Carbon oxides, hydrocarbons
Related products
Binder
A binder is a broad category of substances—organic or inorganic—used to hold different materials together in a cohesive mass. Common binders include natural polymers (starch, cellulose derivatives, proteins), synthetic resins (PVA, acrylics, phenolics), and inorganic binders (clays, cement, lime). They are essential in industries such as pharmaceuticals, construction, coatings, ceramics, adhesives, and printing, where they provide structural integrity, adhesion, and controlled release properties.
Filler WTD
Filler WTD is a versatile, finely processed powdered filler primarily used in a wide range of industrial applications including paints, coatings, plastics, adhesives, sealants, rubber compounds, and construction materials. It is engineered to improve product performance by enhancing mechanical properties, increasing volume, reducing cost, and improving processing characteristics. Filler WTD typically exhibits excellent dispersibility, consistent particle size distribution, and good compatibility with various resin systems and binders. Its primary role is to act as an inert extender or reinforcing agent, providing bulk and stability while maintaining or enhancing the physical and chemical properties of the final formulation.
Kaolin
Kaolin is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It features a soft, powdery texture and excellent absorbency. Kaolin is widely used across ceramics, paper, rubber, paint, and cosmetics industries due to its chemical inertness, whiteness, and plasticity. It acts as a filler, coating agent, and extender to enhance product quality and performance.
Magnesium Carbonate Light
Magnesium Carbonate Light is a fine, white, odorless powder primarily composed of magnesium carbonate (MgCO₃). It is characterized by its light texture and high purity. This mineral compound is widely used across various industries due to its excellent absorption properties, mild alkalinity, and non-toxic nature. Magnesium Carbonate Light is commonly employed as an antacid, drying agent, filler, and flow aid in food, pharmaceutical, cosmetic, and industrial applications.
Master Fibre
Master Fibre is a high-quality synthetic fiber additive designed to reinforce concrete and mortar mixtures. It improves structural integrity by enhancing tensile strength, reducing cracking, and increasing durability. The fibers disperse uniformly within the mix, providing better load distribution and impact resistance in industrial, commercial, and residential construction applications. Master Fibre enhances performance without compromising workability, making it ideal for use in concrete slabs, pavements, beams, and repair mortars.
Sodium Sulphate
Sodium Sulphate (Na₂SO₄) is a white crystalline powder or granule, odorless and highly soluble in water. This 25kg packaged product is widely used in detergents, glass manufacturing, chemical industries, and pulp and paper processing. It acts as a filler, bulking agent, and drying agent, with excellent stability and non-reactivity under standard storage conditions. Its cost-effectiveness and availability make it an essential raw material in many industrial processes.
Talcum Powder (Talc)
Talcum Powder is a naturally occurring mineral composed primarily of hydrated magnesium silicate. It is known for its softness, absorbency, and lubricating properties. Talc is widely used in cosmetic, pharmaceutical, industrial, and consumer products due to its ability to absorb moisture, improve texture, and provide a smooth, silky feel. The powder form allows easy dispersion and application across diverse sectors.
Whiting
Whiting is a finely ground, white, chalky substance primarily composed of calcium carbonate (CaCO₃). It is widely used as a pigment, filler, and extender in various industrial and commercial applications. Whiting provides opacity, brightness, and smoothness to products, enhancing their appearance and physical properties. Its natural abundance and versatility make it an economical additive in multiple manufacturing processes.
