Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Polyglycerol-10-Laurate
Whatsapp Order
Polyglycerol-10-Laurate is a non-ionic, biodegradable surfactant and emulsifier derived from natural lauric acid and polyglycerol (with ten glycerol units). It is known for its excellent emulsifying, dispersing, and solubilizing properties, especially in oil-in-water systems. Commonly used in cosmetics, food, pharmaceuticals, and personal care products, it is valued for being mild, non-toxic, and suitable for sensitive applications, including baby care and oral care.
Description
Polyglycerol-10-Laurate
Primary Uses
- Cosmetic & Personal Care Products
- Used as a primary emulsifier in creams, lotions, serums, and sunscreens.
- Ideal for oil-in-water emulsions, providing smooth texture and stability.
- Common in baby care, sensitive skin, and natural formulations due to its mildness.
- Enhances spreadability and moisture retention in skincare products.
- Food Industry
- Functions as a food-grade emulsifier in sauces, dressings, and non-dairy creamers.
- Used in low-fat and reduced-calorie foods to maintain texture and mouthfeel.
- Helps stabilize flavors and colorants in beverages and emulsified concentrates.
- Approved for use in foods as an emulsifier and dispersing agent in some jurisdictions.
- Pharmaceuticals
- Acts as a solubilizer and emulsifier for active pharmaceutical ingredients (APIs).
- Used in oral suspensions, creams, topical gels, and vaginal formulations.
- Enhances bioavailability of poorly water-soluble drugs.
- Oral Care Products
- Included in toothpastes, mouthwashes, and dental gels as a mild surfactant.
- Helps disperse oils and active ingredients uniformly.
Secondary Uses
- Hair Care Formulations
- Used in shampoos, conditioners, and hair masks as a co-emulsifier and moisturizer.
- Reduces irritation from stronger surfactants and improves scalp comfort.
- Makeup & Color Cosmetics
- Employed in foundations, BB creams, and emulsified makeup for stability and texture enhancement.
- Pet Care Products
- Safe for use in pet grooming products and medicated creams due to its non-toxic nature.
- Natural & Organic Product Lines
- Preferred in clean-label, green-certified, and eco-conscious product formulations.
- Nutraceutical Emulsions
- Stabilizes oil-based nutraceuticals in water-based formulations (e.g., Omega-3 drinks).
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Polyglyceryl-10 laurate
- Common/Trade Name: Polyglycerol-10-Laurate
- CAS Number: 34406-66-1
- HS Code: 3402.13.00 (Non-ionic organic surfactants)
- Synonyms: Polyglyceryl-10 mono/dilaurate; PG-10 Laurate; Non-ionic emulsifier
2. Physical & Chemical Properties
- Physical State: Viscous liquid or soft solid (depending on ambient temperature)
- Color & Odor: Pale yellow to colorless; mild or neutral odor
- Solubility: Soluble in water, alcohols, and glycols
- HLB Value: ~12–14 (ideal for O/W emulsions)
- Acid Value: ≤ 10 mg KOH/g
- Saponification Value: 140–180 mg KOH/g
- pH (1% solution): 5.5 – 7.5
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: Low; safe for topical, oral, and food use (within regulatory limits)
- Allergen Status: Non-allergenic; derived from natural vegetable oils
- Irritation Potential: Very low (skin and eye irritation tests negative at standard use levels)
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool (15–25°C), dry place away from direct sunlight
- Container Type: Food- or pharma-grade HDPE drums, IBCs, or plastic containers
- Shelf Life: Up to 2 years if stored properly
- Handling Precautions: Avoid moisture contamination; use clean, dry tools for handling
5. Regulatory & Compliance Attributes
- Complies with:
- EU Cosmetics Regulation (EC) No 1223/2009
- S. FDA (food and cosmetic additive use – where applicable)
- ECOCERT/COSMOS approved for use in natural and organic cosmetics
- REACH-registered (EU chemical compliance)
6. Environmental & Health Impact
- Biodegradability: Readily biodegradable
- Ecotoxicity: Low environmental risk; suitable for eco-friendly formulations
- Bioaccumulation: Not expected
- Allergenic Potential: None known
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Gloves and safety goggles for bulk handling
- Handling Guidelines:
- Use in well-ventilated areas
- Avoid contact with eyes in concentrated form
- Storage Measures: Keep sealed to prevent moisture absorption and degradation
First Aid Measures
- Inhalation: Unlikely due to low volatility; if irritation occurs, move to fresh air
- Skin Contact: Rinse with water; not known to cause irritation
- Eye Contact: Rinse cautiously with clean water; seek medical advice if discomfort persists
- Ingestion: Generally regarded as safe in small amounts; seek medical help for large ingestion
Firefighting Measures
- Fire Hazards: Non-flammable under normal conditions
- Flash Point: >200°C (closed cup)
- Extinguishing Media: Water spray, CO₂, dry powder, or foam
- Special Precautions: Use standard firefighting PPE
- Hazardous Combustion Products: May emit carbon monoxide and carbon dioxide in a fire
Related products
Amphoteric Surfactants
Amphoteric surfactants are unique surface-active agents that can act as either anionic or cationic surfactants depending on the pH of the solution. These molecules contain both acidic (carboxyl or sulfonic) and basic (amine or quaternary ammonium) functional groups, giving them high versatility, mildness, and compatibility with other surfactants. Amphoteric surfactants are widely used in personal care, household cleaning, industrial applications, pharmaceuticals, and specialty formulations where low irritation and effective cleansing are critical. Common examples include Cocamidopropyl Betaine and Lauryl Betaine.
Booster Emulsifier
Booster Emulsifier is a specialized surfactant-based additive formulated to enhance the stability, texture, and uniformity of emulsions in food, cosmetic, and pharmaceutical formulations. It acts by reducing surface tension between immiscible liquids such as oil and water, facilitating the formation of stable, homogeneous emulsions. Booster Emulsifier is valued for its ability to improve product appearance, extend shelf life, and enhance sensory properties such as mouthfeel and creaminess. It is typically available as a liquid or powder and compatible with a wide range of ingredients.
Ceteareth 20 Ginonic
Ceteareth 20 Ginonic CSA 20 is a nonionic surfactant and emulsifier derived from the ethoxylation of cetearyl alcohol, incorporating approximately 20 ethylene oxide units per molecule. It appears as a white to off-white waxy solid or viscous liquid, depending on temperature and formulation. This emulsifier is widely used in cosmetic, pharmaceutical, and industrial formulations for its excellent ability to stabilize oil-in-water emulsions, improve texture, and enhance the sensory properties of finished products. Its high hydrophilic-lipophilic balance (HLB) makes it especially effective in forming stable emulsions and solubilizing lipophilic ingredients in aqueous phases. Ceteareth 20 is valued for its mildness, broad compatibility, and multifunctional performance.
Cocamino Propyl Betaine Desmocol
Cocamino Propyl Betaine Desmocol is a mild amphoteric surfactant derived from coconut oil fatty acids and amino acids. It appears as a clear to slightly hazy liquid with a faint coconut-like odor. CAPB is widely used in personal care and household cleaning products for its excellent foaming, cleansing, and conditioning properties. Being a zwitterionic surfactant, it is compatible with anionic, cationic, and nonionic surfactants, enhancing the mildness and stability of formulations. The 30% active solution is easy to handle and incorporate in various cosmetic and detergent products. It functions as a foam booster, viscosity builder, and anti-irritant agent, making it a versatile ingredient in mild formulations.
Emulsifying Wax Anionic
Emulsifying Wax Anionic is a versatile surfactant blend composed primarily of fatty alcohols (such as cetyl or stearyl alcohol) and anionic surfactants like sodium lauryl sulfate. It is designed to stabilize oil-in-water (O/W) emulsions by reducing interfacial tension between water and oil phases. It appears as white to off-white solid flakes or pellets, with a mild fatty odor and is dispersible in water with agitation and mild heat. Known for its excellent emulsification, cleansing, and thickening properties, this emulsifying wax is widely used in cosmetics, pharmaceuticals, household cleaners, and industrial applications.
Emulsifying Wax Non ionic
Emulsifying Wax Non ionic is a self-emulsifying, non-ionic wax blend composed primarily of fatty alcohols (typically cetostearyl alcohol or stearyl alcohol) and non-ionic surfactants like polyethylene glycol (PEG) derivatives. It is used to stabilize oil-in-water (O/W) emulsions without relying on ionic charges, making it highly compatible with a wide range of ingredients, including both cationic and anionic components. This wax is commonly found in white, odorless solid flakes or pellets and is dispersible in hot water to form smooth, stable emulsions. It is widely used in cosmetic, pharmaceutical, and industrial applications where gentle emulsification, stability, and broad pH compatibility are needed.
Guar Gum
Guar Gum is a natural polysaccharide extracted from the endosperm of the guar bean (Cyamopsis tetragonoloba). It appears as an off-white to cream-colored powder with a neutral odor and bland taste. Guar Gum is a galactomannan composed mainly of mannose and galactose units, known for its excellent water-binding, thickening, and stabilizing properties. It forms highly viscous solutions even at low concentrations, making it a versatile hydrocolloid used widely across food, pharmaceutical, cosmetic, oilfield, and industrial applications.
Polysorbates
Polysorbates are a class of nonionic surfactants derived from sorbitol and fatty acids, commonly used as emulsifiers, solubilizers, and dispersing agents in a wide range of industries. They improve the mixing of oil and water phases, stabilize emulsions, and enhance the texture and consistency of formulations. Polysorbates are widely used in pharmaceuticals, cosmetics, food products, and industrial applications due to their biocompatibility, low toxicity, and effectiveness at low concentrations.
