Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fragrance (Cosmetics)
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
PVC K67
PVC K67 is a general-purpose polyvinyl chloride resin with a K-value of 67, indicating a medium molecular weight suitable for rigid applications. It is a white, free-flowing powder commonly used in the production of rigid PVC products such as pipes, fittings, profiles, and sheets. PVC K67 offers excellent processability, good mechanical strength, chemical resistance, and dimensional stability, making it ideal for a wide range of industrial and construction applications.
PVC K67
Primary Uses
- Building & Construction
- Used in manufacturing rigid pipes for water supply, drainage, and electrical conduit systems.
- Employed in producing window and door profiles, wall panels, and ceiling cladding.
- Utilized in manufacturing fittings, cable ducts, and other rigid structural components.
- Industrial Fabrication
- Applied in the production of chemical tanks, linings, and trays due to its chemical resistance.
- Used in industrial ductwork and ventilation systems.
- Packaging Industry
- Utilized in rigid film production for thermoformed packaging like trays, blisters, and containers.
- Used in non-food packaging for consumer goods and electronics.
- Automotive Applications
- Used in production of rigid trim parts, instrument panel frames, and cable insulation conduits.
- Consumer Goods
- Applied in the making of furniture edge bands, display stands, and rigid toys.
Secondary Uses
- Medical Devices (Non-flexible components)
- Used in parts of disposable syringes, connectors, and other rigid m
1. Basic Identification Attributes
- Chemical Name (IUPAC): Poly(chloroethene) or Polyvinyl chloride
- Common/Trade Name: PVC K67
- CAS Number: 9002-86-2
- HS Code: 3904.10.00
- Synonyms: Rigid PVC resin, Suspension PVC
2. Physical & Chemical Properties
- Physical State: Fine white powder
- Color & Odor: White; odorless
- K-Value: 67 (medium molecular weight)
- Bulk Density: Approx. 0.5 – 0.7 g/cm³
- Solubility: Insoluble in water; soluble in some organic solvents (under heat)
- Thermal Stability: Decomposes above 140–160°C
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous in solid form; may emit harmful gases when heated
- Toxicity: Low toxicity; avoid inhalation of dust or combustion fumes
- Exposure Limits: Use appropriate controls when handling fine powder
4. Storage & Handling Attributes
- Storage Conditions: Store in dry, cool, well-ventilated areas away from heat and ignition sources
- Container Type: Bags (typically 25 kg), bulk bags, or silo storage
- Shelf Life: Indefinite if stored in optimal conditions
- Handling Precautions: Minimize dust generation; use dust extraction systems during processing
5. Regulatory & Compliance Attributes
- Complies with standards for rigid PVC use in construction, packaging, and general goods
- May conform to RoHS, REACH, and FDA standards for certain applications (dependent on additives used)
6. Environmental & Health Impact
- Biodegradability: Not biodegradable
- Ecotoxicity: Low in stable form; avoid environmental release of fine dust
- Bioaccumulation: Not expected
Safety Handling Precautions
- PPE Required: Use dust mask or respirator, gloves, goggles, and protective clothing
- Handling Guidelines: Avoid dust formation; ensure local ventilation during processing
- Storage Measures: Keep containers tightly closed and stored in a dry environment
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms persist
- Skin Contact: Wash with soap and water; seek attention for persistent irritation
- Eye Contact: Rinse thoroughly with water for at least 15 minutes; consult a doctor
- Ingestion: Rinse mouth; do not induce vomiting; seek medical help
Firefighting Measures
- Fire Hazards: Non-flammable as a powder; decomposes under heat to release HCl and other toxic gases
- Extinguishing Media: Foam, dry chemical, water spray, or CO₂
- Special Precautions: Wear full protective equipment and self-contained breathing apparatus
- Hazardous Combustion Products: Hydrogen chloride gas, carbon monoxide, carbon dioxide, and other chlorinated compounds
Related products
HDPE Film F52H04
HDPE Film F52H04 Opalene is a high-density polyethylene film grade resin specially engineered for producing thin, flexible, and high-strength films. It is designed for blown film extrusion processes, delivering excellent mechanical properties, superior clarity (opal/opalene finish), and consistent gauge control. This resin offers high tensile strength, good puncture resistance, and excellent moisture barrier properties, making it ideal for packaging applications requiring durability and flexibility. Its balanced processing characteristics enable fast extrusion rates and uniform film thickness.
LLDPE injection 6201XR
LLDPE injection 6201XR is a linear low-density polyethylene resin specially formulated for injection molding applications. It offers excellent processability, high impact strength, and good flexibility. The material provides a balance of mechanical performance and ease of molding, making it ideal for producing thin-walled and complex-shaped parts. With superior clarity and toughness, LLDPE Injection 6201XR is widely used in manufacturing durable consumer goods, automotive components, and packaging items.
Melamine
Melamine is an organic compound widely used as a raw material in the production of melamine-formaldehyde resins, laminates, adhesives, coatings, and flame retardants. It offers excellent hardness, thermal stability, and chemical resistance. Supplied in 25kg bags, melamine is a white crystalline powder with high nitrogen content, making it a valuable additive in plastics, construction materials, and surface treatments.
Polyvinyl Chloride Resin
Polyvinyl Chloride Resin is a white, odorless powder widely used as the base material in the production of both rigid and flexible PVC products. It is produced by polymerizing vinyl chloride monomer (VCM) and is categorized by K-value, which defines molecular weight and processing characteristics. PVC resin is valued for its durability, chemical resistance, electrical insulation, and flame retardancy. It is one of the most versatile plastics used across multiple industries including construction, electrical, automotive, packaging, and healthcare.
Polyvinyl Chloride Resin 702
Polyvinyl Chloride Resin 702 is a high molecular weight, suspension-grade polyvinyl chloride resin with a K-value around 70–72. It is specifically formulated for use in soft and flexible PVC products due to its excellent plasticizer absorption and high mechanical strength. Its superior elongation, thermal stability, and processability make it highly suitable for calendaring, extrusion, injection molding, and dip molding operations. PVC Resin 702 is extensively used across the cable, synthetic leather, film, and footwear industries.
Propylene PP Non Woven RH 38
Propylene PP Non Woven RH 38 is a polypropylene-based non-woven fabric known for its strength, durability, and lightweight properties. Manufactured through a process that binds polypropylene fibers without weaving, it results in a fabric that is breathable, resistant to chemicals and moisture, and highly versatile. This product is widely used in various industrial, medical, and consumer applications where disposable or reusable fabric is needed.
Toluene Diisocyanate
Toluene Diisocyanate is a highly reactive chemical compound primarily used as a key raw material in the production of polyurethane foams. It is a colorless to pale yellow liquid with a pungent odor and is valued for its ability to react with polyols to form flexible and rigid polyurethane products. TDI’s versatility makes it indispensable in industries like furniture, automotive, insulation, and coatings.
