Standard Thinner

Whatsapp Order

Standard Thinner is a solvent blend designed to reduce the viscosity of paints, varnishes, and coatings to facilitate easier application and improved finish. Typically composed of organic solvents such as mineral spirits, toluene, or xylene, this product aids in controlling drying time and enhancing flow properties. Packaged typically in liquid form, it is compatible with various paint systems including alkyd, nitrocellulose, and synthetic coatings.

Add to compare

Add to wishlist

Categories: CLEANING AND DETERGENT CHEMICALS, PAINT & COATINGS CHEMICALS, Solvents (Cleaning), Solvents(paint), SPECIALTY AND FINE CHEMICALS Tags: Clear Volatile Liquid, Fast-evaporating solvent, Paint thinner, Solvent Blend, Standard Thinner

Description

Uses

Primary Uses

Paints & Coatings

Viscosity Reduction: Thins paints and varnishes for better spray or brush application.
Flow Improvement: Enhances leveling and uniformity of coatings.
Drying Control: Modifies drying rate to prevent defects like sagging or orange peel.

Industrial Applications

Cleaning Agent: Cleans spray guns, brushes, and equipment contaminated with paints or adhesives.
Diluent: Used in manufacturing processes to adjust formulation consistency.

Automotive

Body Shop: Used to thin automotive paints and clear coats for refinishing work.

Secondary Uses

Adhesives & Sealants

Viscosity Adjuster: Adjusts flow characteristics of certain adhesive formulations.

Printing Industry

Ink Thinner: Reduces viscosity of solvent-based printing inks for improved application.

PRODUCT KEY FEATURES

Basic Identification Attributes

Chemical Name (IUPAC): Solvent blend (varies by formulation)
Common/Trade Name: Standard Thinner
CAS Number: Varies depending on components (e.g., mineral spirits 64742-88-7)
HS Code: 3814.00.00
Synonyms: Paint thinner, solvent blend

Physical & Chemical Properties

Physical State: Liquid
Color & Odor: Clear to pale yellow; characteristic solvent odor
Solubility: Miscible with paints and many organic solvents; insoluble in water
Density: Approx. 0.8-0.9 g/cm³
Flash Point: Typically 30-40°C (depending on formulation)

Safety & Hazard Attributes

GHS Classification: Flammable liquid (Category 3), skin irritant (Category 2)
Toxicity: May cause respiratory and skin irritation; prolonged exposure harmful
Exposure Limits: OSHA PEL varies with solvents; typically TWA ~100 ppm for components

Storage & Handling Attributes

Storage Conditions: Store in well-ventilated, cool, dry area away from ignition sources
Container Type: Metal or plastic drums, cans
Shelf Life: 12-24 months if sealed and stored properly
Handling Precautions: Use grounding and bonding when transferring; avoid open flames

Regulatory & Compliance Attributes

Complies with relevant OSHA and EPA solvent regulations
Meets VOC limits according to regional environmental standards
Manufactured under Good Manufacturing Practices (GMP) when applicable

Environmental & Health Impact

Biodegradability: Varies; some components biodegradable, others persist
Ecotoxicity: Moderate; avoid release to waterways

Bioaccumulation: Low potential

SAFETY HANDLING PRECAUTIONS

Safety Handling Precautions

PPE Required: Gloves, goggles, and respirators recommended
Handling Guidelines: Use in well-ventilated areas; avoid inhalation and skin contact
Storage Measures: Keep containers tightly closed and away from heat sources

First Aid Measures

Inhalation: Move to fresh air; seek medical attention if breathing difficulties occur
Skin Contact: Wash with soap and water; remove contaminated clothing
Eye Contact: Rinse immediately with water for 15 minutes; seek medical help if irritation persists
Ingestion: Do NOT induce vomiting; seek immediate medical attention