Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
HDPE Film F52H04 Opalene
Whatsapp Order
HDPE Film F52H04 Opalene is a high-density polyethylene film grade resin specially engineered for producing thin, flexible, and high-strength films. It is designed for blown film extrusion processes, delivering excellent mechanical properties, superior clarity (opal/opalene finish), and consistent gauge control. This resin offers high tensile strength, good puncture resistance, and excellent moisture barrier properties, making it ideal for packaging applications requiring durability and flexibility. Its balanced processing characteristics enable fast extrusion rates and uniform film thickness.
Description
HDPE Film F52H04 Opalene
Primary UsesÂ
- Packaging Industry
- Used extensively in flexible packaging films for food products such as snack wrappers, frozen food bags, and fresh produce packaging.
- Suitable for shopping bags, carrier bags, and refuse sacks requiring high tear resistance and durability.
- Employed in shrink films and stretch wraps for palletizing and bundling products.
- Used in industrial packaging films for protection and moisture barrier in storage and transport.
- Agricultural Films
- Production of mulch films and greenhouse covers providing protection while allowing light diffusion (opal finish).
- Used in silage films for forage preservation due to moisture and oxygen barrier properties.
- Medical and Hygiene Products
- Used in protective covers, medical packaging films, and hygiene product wraps where sterility and barrier protection are essential.
- Consumer Goods
- Production of garbage bags, liners, and protective films for household and commercial use.
- Used in laminated films for flexible packaging combining mechanical strength and printability.
Secondary UsesÂ
- Industrial Applications
- Films for industrial liners and protective sheets in construction and manufacturing.
- Used as vapor barriers in building insulation and packaging.
- Printing & Lamination
- Acts as a substrate for lamination with other polymers or paper to enhance packaging aesthetics and performance.
- Recycling Applications
- Accepted in film recycling streams and can be reprocessed into various low-to-medium-end film products.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Polyethylene, high-density (HDPE)
- Common/Trade Name: HDPE Film F52H04, Opalene
- CAS Number: 9002-88-4
- HS Code: 3920.20.00
- Polymer Type: High-density polyethylene (HDPE) film grade
- Synonyms: Opalene HDPE film resin; HDPE blown film resin
- Physical & Chemical Properties
- Physical State: Pellet resin for film extrusion
- Color & Odor: Natural/opalescent; odorless
- Density: ~0.945 g/cm³
- Melt Flow Index (MFI): Approximately 0.20–0.40 g/10 min
- Melting Point: Approx. 130°C
- Tensile Strength: High tensile strength suitable for thin film applications
- Elongation at Break: High, providing flexibility
- Moisture Barrier: Excellent moisture resistance
- Optical Properties: Opal/opalene finish providing light diffusion and moderate clarity
- Environmental Stress Crack Resistance: Good
- Safety & Hazard Attributes
- GHS Classification: Not hazardous
- Toxicity: Non-toxic, suitable for food contact applications (subject to certification)
- Handling: Non-irritant under normal handling
- Storage & Handling Attributes
- Container Type: Supplied in bags or bulk packaging
- Storage Conditions: Dry, cool environment away from direct sunlight and moisture
- Shelf Life: 2–3 years if stored properly
- Handling Notes: Minimize dust; use appropriate PPE if dust generation occurs
- Regulatory & Compliance Attributes
- Food contact approved by FDA, EFSA (subject to certification)
- Complies with EU Regulation No. 10/2011 for plastic materials in contact with food
- REACH and RoHS compliant
- Environmental & Health Impact
- Biodegradability: Non-biodegradable but recyclable
- Recycling: Accepted in polyethylene film recycling streams
- Ecotoxicity: Low, inert polymer
- Carcinogenicity/Mutagenicity: Not classified
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Gloves, safety goggles, dust masks when handling powder or resin pellets
- Handling Guidelines: Use in well-ventilated areas; avoid dust inhalation
- Hygiene Practices: Wash hands after handling; avoid ingestion and eye contact
- First Aid Measures
- Inhalation: Move to fresh air if irritation occurs
- Skin Contact: Wash with soap and water
- Eye Contact: Rinse with water for at least 15 minutes; seek medical advice if irritation persists
- Ingestion: Not harmful in small amounts; seek medical advice if large quantities swallowed
- Firefighting Measures
- Fire Hazards: Combustible solid; emits dense smoke when burned
- Extinguishing Media: Water spray, foam, dry chemical, COâ‚‚
- Combustion Products: Carbon monoxide, carbon dioxide, hydrocarbons
- Firefighter PPE: Use self-contained breathing apparatus and protective gear
Related products
Emulsifier (Emulgator)
Emulsifier is a nonionic surfactant belonging to the family of Nonylphenol Ethoxylates (NPEs), specifically with an average of 9 ethylene oxide (EO) units. It is widely used as an effective emulsifying, wetting, dispersing, and solubilizing agent. NP-9 is typically a pale yellow to amber viscous liquid, soluble in water and various organic solvents. It is valued for its strong emulsifying ability to stabilize oil-in-water (O/W) and water-in-oil (W/O) emulsions, excellent detergency, and good compatibility with other surfactants and formulation ingredients. NP-9 is commonly employed in industrial, agricultural, cosmetic, pharmaceutical, and cleaning applications.
LLDPE Roto T3804U MFI/MFR
LLDPE Roto T3804U MFI/MFR is a linear low-density polyethylene resin designed specifically for rotational molding applications. It offers excellent melt flow characteristics (MFI/MFR) that facilitate even melting and smooth flow in the mold, producing parts with uniform thickness and good mechanical properties. This grade provides superior impact strength, flexibility, and chemical resistance, making it ideal for manufacturing large hollow items such as tanks, containers, and playground equipment. Its tailored flow properties enable high-quality surface finishes and improved production efficiency in roto molding processes.
Parallizer (UFABLEND)
Product Description
Parallizer (UFABLEND) is a versatile liquid paralytic agent used primarily in the formulation of pesticides and herbicides to enhance the immobilization of target pests. It acts by disrupting the nervous system of insects and other pests, providing quick knockdown effects. UFABLEND is valued for its fast action, compatibility with other agrochemicals, and stability under various environmental conditions.
Stearic Acid
 Stearic Acid (Triple Pressed) is a high-purity, saturated fatty acid derived primarily from vegetable fats. The triple pressing process enhances its purity, resulting in a fine, waxy solid with excellent consistency and reduced impurities. It is widely used as an emulsifier, thickener, and surfactant in various industries, providing stability and texture to products ranging from cosmetics to rubber and plastics.
Stearic Acid Rubber Grade
 Stearic Acid Rubber Grade is a high-purity fatty acid specifically processed for use in the rubber industry. It acts as a lubricant, dispersing agent, and activator in rubber compounding, enhancing processing characteristics and improving the quality and durability of finished rubber products. This grade ensures optimal performance under the demanding conditions of rubber manufacturing.
White Oil Tech Grade
White Oil Tech Grade is a highly refined mineral oil with excellent purity, designed primarily for technical and industrial applications. It is colorless, odorless, and chemically inert, offering excellent lubricity, stability, and moisture resistance. This grade of white oil is widely used as a base oil, lubricant, and processing aid across various manufacturing sectors, ensuring smooth operation and protection of equipment and products.
Zicronium Octoate
 Zirconium Octoate is a metal carboxylate solution comprising zirconium ions complexed with octoic acid at an 18% zirconium concentration. It serves as an effective crosslinking and curing agent in coatings, adhesives, and sealants, enhancing film hardness, chemical resistance, and durability. This zirconium-based additive is valued for its catalytic properties in accelerating the curing of various polymer systems, especially in automotive and industrial applications.
Zinc Octoate
Zinc Octoate is a metal carboxylate solution containing approximately 10% zinc content, derived from zinc and 2-ethylhexanoic acid (octoic acid). It functions as an effective curing agent, catalyst, and crosslinker in various polymer systems such as paints, coatings, adhesives, and rubber compounds. This compound improves film hardness, drying times, and overall durability of finished products, making it widely used in industrial and manufacturing processes.
