Acidulants
Antioxidants
Nutraceutical Ingredients (food)
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Chromatography Chemicals
Spectroscopy Reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Back to products
Hydrochloric Acid HCL 270 kg Drum
Original price was: $ 1.00.$ 0.86Current price is: $ 0.86.
Hydrocarbon Resins C5 And C9 Petroleum Resins
Whatsapp Order
Hydrocarbon Resins C5 And C9 Petroleum Resins are synthetic petroleum-derived resins produced through the polymerization of C5 (pentene) and C9 (nonene) fraction monomers. These resins appear as pale yellow to amber solid materials, usually in pellet or flake form, characterized by tackifying and adhesive properties. C5 resins are derived from aliphatic hydrocarbons, while C9 resins originate from aromatic hydrocarbons. Often blended, these resins provide a balance of hardness, tackiness, and compatibility with various polymers. Widely used as tackifiers, binders, and modifiers, C5 & C9 hydrocarbon resins enhance performance in adhesives, coatings, rubber compounding, and more.
Description
Hydrocarbon Resins C5 And C9 Petroleum Resins
Primary Uses
- Adhesives Industry
- Act as tackifiers and binding agents in pressure-sensitive adhesives (PSAs) such as tapes, labels, and sticky notes.
- Improve adhesion strength and bonding performance in hot melt adhesives (HMAs) used in packaging, bookbinding, woodworking, and footwear.
- Serve as compatibility enhancers between polymers and tackifiers in solvent-based and water-based adhesive formulations.
- Rubber and Tire Industry
- Function as softening and reinforcing agents in rubber compounding to enhance processing, tack, and grip of tires and conveyor belts.
- Improve low-temperature flexibility and abrasion resistance of rubber products.
- Paints and Coatings
- Used as modifiers to enhance gloss, hardness, and adhesion in industrial and automotive coatings.
- Improve flow and leveling characteristics in paints and varnishes.
- Printing Inks
- Serve as resins in printing inks to improve adhesion, gloss, and drying properties.
- Sealants and Caulks
- Provide tack and binding properties in sealants and caulks used in construction and automotive sealing applications.
- Plastic and Polymer Industry
- Employed as modifiers in plastic compounding to enhance impact strength and processability of polymers such as polystyrene and polyethylene.
Secondary Uses
- Rubberized Asphalt
- Added to asphalt formulations to improve flexibility, adhesion, and durability of roofing and road materials.
- Hot Melt Road Marking Paints
- Used as film formers and tackifiers in road marking paints for improved durability and weather resistance.
- Cosmetics and Personal Care
- Occasionally used in specialty cosmetic adhesives (e.g., eyelash glue) for tack and durability.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Base: Petroleum-derived hydrocarbon polymers (C5 and C9 fractions)
- Common/Trade Name: Hydrocarbon Resins C5 & C9
- CAS Number: Mixtures (varies by resin type, typically proprietary blends)
- HS Code: 3905.90.00
- Molecular Formula: Complex mixture of C5 and C9 hydrocarbons polymerized
- Synonyms: C5 Resin, C9 Resin, Petroleum Hydrocarbon Resin, Tackifying Resin
- Physical & Chemical Properties
- Physical State: Solid (pellets, flakes, or powder)
- Color & Odor: Pale yellow to amber; mild petroleum odor
- Softening Point: Typically 90–120°C (Ring & Ball method)
- Density: Approx. 1.0–1.1 g/cm³
- Solubility: Soluble in aromatic and aliphatic solvents; insoluble in water
- Compatibility: Compatible with various polymers like natural rubber, styrene-butadiene rubber, ethylene-vinyl acetate, and others
- Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous; combustible solid
- Toxicity: Low toxicity; no significant acute toxicity reported
- Exposure Limits: No specific occupational exposure limits established; avoid dust inhalation
- Storage & Handling Attributes
- Container Type: Sealed polyethylene bags or drums
- Storage Conditions: Store in cool, dry, well-ventilated area away from heat and ignition sources
- Shelf Life: 12–24 months under recommended conditions
- Handling Notes: Avoid dust generation; use proper PPE to prevent inhalation
- Regulatory & Compliance Attributes
- Complies with regulatory standards for industrial and commercial use
- Not intended for food contact unless specified by manufacturer
- REACH registered in applicable jurisdictions
- Environmental & Health Impact
- Biodegradability: Poorly biodegradable due to synthetic hydrocarbon nature
- Ecotoxicity: Low aquatic toxicity but avoid environmental release
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: No evidence of carcinogenic or mutagenic effects
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Dust mask or respirator, gloves, safety goggles
- Handling Guidelines: Use in well-ventilated areas; minimize dust exposure
- Hygiene Practices: Wash hands after handling; avoid ingestion and inhalation
- First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms persist
- Skin Contact: Wash with soap and water; seek medical advice if irritation occurs
- Eye Contact: Rinse with plenty of water for 15 minutes; consult physician if irritation persists
- Ingestion: Rinse mouth; seek medical advice if large amounts ingested
- Firefighting Measures
- Fire Hazards: Combustible solid; dust may form explosive mixtures with air
- Extinguishing Media: Use foam, dry chemical, or CO₂; avoid water jets on burning material
- Special Precautions: Wear protective equipment; prevent dust dispersion
- Combustion Products: Carbon monoxide, carbon dioxide, and hydrocarbons
Related products
Barium Nitrate
Barium Nitrate is an inorganic chemical compound, a white crystalline solid composed of barium and nitrate ions. It is highly soluble in water and serves as an oxidizing agent. Due to its energetic properties, barium nitrate is widely used in pyrotechnics to produce vibrant green colors and as an oxidizer in explosives and fireworks. It is also utilized in the manufacturing of barium oxide and other barium compounds. Barium nitrate must be handled carefully due to its toxicity and oxidizing nature.
Bayprene
Bayprene is a high-quality, synthetic rubber polymer belonging to the class of nitrile butadiene rubbers (NBR). It is widely used for its excellent resistance to oils, fuels, chemicals, and abrasion, making it ideal for sealing, gasketing, hoses, and industrial applications where durability and chemical resistance are required. Bayprene exhibits good mechanical properties, high tensile strength, and resistance to swelling and degradation, especially in petroleum-based environments. It is commonly supplied as solid rubber sheets, molded parts, or raw polymer for compounding.
BxPB Paint Drier (Lead Replacement)
BxPB Paint Drier is a specialized industrial additive designed as a non-toxic, lead-free alternative to traditional lead-based paint driers. It contains 36% active metal content primarily composed of bismuth and other metals, formulated to accelerate the drying and curing process of oil-based paints, varnishes, and coatings. The product improves film formation, reduces drying times, and enhances the durability and gloss of finished surfaces without the health and environmental hazards associated with lead compounds. BxPB36% Paint Drier is commonly used in architectural, industrial, and automotive coatings as a safer substitute for lead-based driers.
Cyclohexanone
Cyclohexanone is a clear, colorless to pale yellow liquid with a sharp, sweet, acetone-like odor. It is a cyclic ketone with the molecular formula C₆H₁₀O and a moderately high boiling point. Cyclohexanone is a key intermediate in the chemical industry, primarily used in the manufacture of nylon, pharmaceuticals, and agrochemicals. Its excellent solvency and chemical reactivity make it valuable for a wide range of industrial applications, including solvent use and chemical synthesis.
Hydrochloric Acid HCL
Hydrochloric Acid HCL is a highly corrosive, strong mineral acid consisting of hydrogen chloride gas dissolved in water to a concentration of approximately 33% by weight. It appears as a clear, colorless to slightly yellow liquid with a sharp, pungent odor. HCl 33% is widely used in industrial, chemical, and laboratory applications due to its strong acidic properties, high reactivity, and versatility. It plays a crucial role in pH control, metal processing, chemical synthesis, and cleaning processes across numerous sectors.
Lead Drier
Lead Drier is a chemical additive primarily used in the coatings and paints industry to accelerate the drying and curing process of oil-based paints, varnishes, and coatings. It functions as a catalytic agent that promotes the oxidative polymerization of drying oils, reducing the drying time and improving the film formation. Lead driers are traditionally lead-based salts such as lead naphthenate or lead octoate, valued for their effectiveness at low concentrations. Due to toxicity concerns, their use is increasingly regulated and often replaced by safer alternatives.
Lead Octoate Drum
Lead Octoate Drum is a viscous liquid solution containing 30% lead octoate, a metal soap derived from lead and 2-ethylhexanoic acid (also known as octanoic acid). It is primarily used as a drying agent (drier) in paints, varnishes, and coatings to accelerate the curing process by promoting oxidation and polymerization of drying oils. This product is widely employed in industrial coatings to improve drying times, hardness, and durability of surface films. Packaged typically in 250kg drums, Lead Octoate 30% is handled with care due to the toxic nature of lead compounds.
Rubber Accelerator MBTS
Rubber Accelerator MBTS (Mercaptobenzothiazole Disulfide) is a crucial chemical used in the vulcanization process of rubber. It accelerates the cross-linking of rubber molecules, enhancing the elasticity, strength, and durability of the final rubber products. MBTS is favored for its effective acceleration properties and is widely used in the production of tires, footwear, hoses, and various rubber goods.
