Acidulants
Antioxidants
Nutraceutical Ingredients (food)
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Chromatography Chemicals
Spectroscopy Reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Isopropyl Palmitate
Whatsapp Order
Isopropyl Palmitate IPP is a clear, colorless to pale yellow oily liquid formed by the esterification of isopropyl alcohol and palmitic acid. It has a mild odor and is widely used in cosmetic, pharmaceutical, and industrial formulations as an emollient, lubricant, and solvent. IPP is valued for its excellent skin absorption, non-greasy feel, and ability to improve texture and spreadability of topical products.
Description
Isopropyl Palmitate (IPP)
Primary Uses
- Cosmetic and Personal Care Industry
- Functions as an emollient and moisturizer in creams, lotions, makeup, sunscreens, deodorants, and hair care products, providing a smooth, silky, and non-greasy skin feel.
- Acts as a penetration enhancer, improving the absorption of active ingredients into the skin.
- Serves as a solvent for fragrances, oils, and other cosmetic ingredients to ensure stable and homogeneous formulations.
- Pharmaceutical Industry
- Used as a vehicle and emollient in topical creams, ointments, and gels to facilitate drug delivery and enhance skin absorption.
- Fragrance Industry
- Utilized as a solvent and fixative in perfumes and colognes to improve scent longevity and dispersion.
- Industrial Applications
- Applied as a lubricant and anti-static agent in plastic, rubber, and textile processing.
- Used as a carrier solvent in insect repellents and pesticide formulations.
Secondary Uses
- Food Industry
- Occasionally used as a flavor carrier in specific food-grade applications, subject to regulatory approvals.
- Hair Care Products
- Incorporated in shampoos, conditioners, and styling products to enhance softness and reduce greasy residue.
- Cleaning and Polishing Products
- Used in specialized polishes and cleaning agents for its lubricating and spreading properties.
- Veterinary Use
- Employed in topical veterinary formulations to improve skin condition and facilitate drug absorption.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Propan-2-yl hexadecanoate
- Common/Trade Name: Isopropyl Palmitate; IPP
- CAS Number: 142-91-6
- HS Code: 2915.70.00
- Synonyms: Isopropyl hexadecanoate; IPP
- Physical & Chemical Properties
- Physical State: Clear oily liquid
- Color & Odor: Colorless to pale yellow; mild odor
- Boiling Point: Approx. 275–280 °C
- Melting Point: −3 °C
- Density: Approx. 0.85 g/cm³
- Solubility: Insoluble in water; soluble in most organic solvents
- Flash Point: Approx. 140 °C
- Safety & Hazard Attributes
GHS Classification:
- Not classified as hazardous under normal use
- May cause mild skin or eye irritation in sensitive individuals
Toxicity:
- Low toxicity; widely regarded as safe in cosmetic and pharmaceutical uses
Exposure Limits:
- No established occupational exposure limits
- Storage & Handling Attributes
Storage Conditions:
- Store in a cool, dry, and well-ventilated area away from strong oxidizing agents
Container Type:
- Stored in sealed plastic or metal containers
Shelf Life:
- Stable for 2 to 3 years under proper storage conditions
Handling Precautions:
- Avoid prolonged skin contact and inhalation of vapors
- Use appropriate personal protective equipment (PPE) when handling in bulk
- Regulatory & Compliance Attributes
- Approved for use in cosmetics and topical pharmaceuticals by regulatory agencies such as FDA and EMA
- Complies with REACH and other global chemical safety standards
- Labeling must comply with cosmetic ingredient regulations
- Environmental & Health Impact
- Biodegradability: Readily biodegradable
- Ecotoxicity: Low toxicity to aquatic life; avoid environmental release
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
PPE Required:
- Gloves and safety goggles recommended when handling bulk material
Handling Guidelines:
- Avoid skin and eye contact
- Use in well-ventilated areas
Storage Measures:
- Keep containers tightly closed and away from heat and ignition sources
- First Aid Measures
- Inhalation: Move affected person to fresh air; seek medical attention if symptoms persist
- Skin Contact: Wash thoroughly with soap and water; seek medical advice if irritation occurs
- Eye Contact: Rinse eyes with water for at least 15 minutes; get medical attention if irritation persists
- Ingestion: Rinse mouth; seek medical attention if large amounts ingested
- Firefighting Measures
- Fire Hazards: Combustible liquid; will burn though with low flame spread
- Extinguishing Media: Use foam, dry chemical, or carbon dioxide extinguishers
- Special Precautions: Wear full protective gear and self-contained breathing apparatus if involved in fire
- Hazardous Combustion Products: Carbon monoxide, carbon dioxide, and irritating vapors
Related products
Candelilla Wax
 Candelilla Wax is a natural vegetable wax derived from the leaves of the Euphorbia cerifera shrub, native to northern Mexico and the southwestern United States. It appears as a hard, brittle, light yellow to brown wax with a mild, characteristic odor. This wax is valued for its high melting point, gloss-enhancing properties, and excellent binding capabilities. It is widely used in cosmetics, pharmaceuticals, food, and industrial applications as a vegan alternative to beeswax. Its film-forming, emollient, and stabilizing attributes make it a multifunctional ingredient across several industries.
Dioctyl Phthalate
Dioctyl Phthalate (DOP), also known as di(2-ethylhexyl) phthalate (DEHP), is a widely used plasticizer primarily added to polyvinyl chloride (PVC) and other polymers to enhance flexibility, durability, and workability. It is a clear, colorless, oily liquid with a slight ester odor. Due to its excellent compatibility with many polymers and long-lasting plasticizing effects, DOP is one of the most common phthalate plasticizers used in industries such as construction, automotive, packaging, and medical devices. It also serves as a solvent and dispersant in various chemical processes.
HDPE Blow HDB5502
HDPE Blow HDB5502 is a high-density polyethylene resin specifically formulated for blow molding applications. It is a semi-crystalline thermoplastic polymer characterized by excellent strength-to-density ratio, high chemical resistance, and superior processability in blow molding equipment. This grade exhibits high stiffness, good environmental stress crack resistance (ESCR), and excellent impact resistance, making it ideal for manufacturing durable hollow containers and complex-shaped products. The resin is supplied as granular pellets with consistent melt flow and homogeneity, optimized for efficient molding cycles and high throughput.
HDPE Injection
HDPE Injection is a high-density polyethylene resin specially formulated for injection molding processes. This grade exhibits excellent flow characteristics with moderate melt flow index optimized for producing precise, high-strength molded parts with superior surface finish. It combines good impact resistance, stiffness, and chemical resistance with excellent dimensional stability. The resin ensures reliable processing performance across a broad temperature range and is suitable for complex, detailed, or large injection-molded components. It is supplied as uniform granules designed for smooth melting and consistent molding cycles.
HDPE Pipe HS CRP
HDPE Pipe HS CRP is a high-density polyethylene (HDPE) pipe grade resin specially designed for the manufacture of high-performance pressure pipes. This grade corresponds to PE 100 classification, meaning it has enhanced strength and durability characteristics suitable for high-pressure applications. The resin exhibits excellent resistance to slow crack growth, outstanding chemical resistance, and superior impact strength even at low temperatures. HDPE PE 100 pipe is widely used in demanding infrastructure, water supply, gas distribution, and industrial piping systems due to its long service life, flexibility, and corrosion resistance.
LLDPE film Opalene F20015
LLDPE film Opalene F20015 is a high-quality linear low-density polyethylene (LLDPE) film known for its excellent clarity, toughness, and flexibility. It is produced using linear low-density polyethylene resin, offering superior mechanical properties and puncture resistance compared to conventional low-density polyethylene films. Opalene F20015 is widely used in packaging applications where strength, transparency, and sealability are critical. Its balanced properties make it suitable for various industrial and consumer packaging needs.
LLDPE Roto T3804U MFI/MFR
LLDPE Roto T3804U MFI/MFR is a linear low-density polyethylene resin designed specifically for rotational molding applications. It offers excellent melt flow characteristics (MFI/MFR) that facilitate even melting and smooth flow in the mold, producing parts with uniform thickness and good mechanical properties. This grade provides superior impact strength, flexibility, and chemical resistance, making it ideal for manufacturing large hollow items such as tanks, containers, and playground equipment. Its tailored flow properties enable high-quality surface finishes and improved production efficiency in roto molding processes.
