Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
RAP 55D
Whatsapp Order
RAP 55D is a grade of impact copolymer polypropylene (PP) resin designed primarily for injection molding applications. It features a balance of rigidity and impact strength, making it ideal for manufacturing durable plastic parts. This resin offers excellent processability, dimensional stability, and resistance to chemicals and moisture. RAP 55D is used across automotive, household, industrial, and packaging sectors due to its robust mechanical properties and versatility.
Description
RAP 55D
Primary Uses
- Injection Molding Industry
- Used to produce automotive parts such as battery cases, bumpers, interior trims, and dashboards due to its high impact resistance.
- Common in appliance housings (e.g., vacuum cleaners, washing machine panels) and tool casings where strength and thermal resistance are important.
- Utilized in industrial components like containers, crates, and pallets that require both toughness and structural integrity.
- Ideal for consumer product packaging, including caps, closures, and rigid containers.
- Electrical & Electronics
- Used in electrical enclosures, junction boxes, and cable reels due to its excellent insulation and mechanical properties.
- Furniture & Housewares
- Applied in the manufacturing of chair shells, buckets, storage boxes, and fittings requiring strength and durability.
Secondary Uses
- Compounding & Blending
- Acts as a base resin in masterbatch production, especially for impact-modified compounds and color concentrates.
- Construction Industry
- Used in pipe fittings, panels, and mounting elements requiring light weight and impact strength.
- Stationery & Toys
- Employed in making durable toys, folders, files, and toolkits due to its safety profile and moldability.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Poly(propene)
- Common/Trade Name: RAP 55D
- CAS Number: 9003-07-0
- HS Code: 3902.30.00
- Synonyms: Impact Copolymer Polypropylene; PP Copolymer RAP 55D
2. Physical & Chemical Properties
- Physical State: Solid (pellets)
- Color & Odor: Translucent to opaque; slight hydrocarbon odor
- Melt Flow Index (230°C/2.16kg): Typically 10–15 g/10 min (varies by supplier)
- Density: ~0.90–0.91 g/cm³
- Impact Strength: High (due to ethylene-propylene rubber phase)
- Solubility: Insoluble in water; soluble in hot aromatic hydrocarbons
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: Non-toxic under normal use; may emit fumes when overheated
- Exposure Limits: No specific occupational exposure limits for solid form
4. Storage & Handling Attributes
- Storage Conditions: Store in dry, cool, well-ventilated areas away from direct sunlight
- Container Type: Supplied in 25kg bags, jumbo bags, or bulk silos
- Shelf Life: Indefinite under proper storage
- Handling Precautions: Avoid dust formation; ensure proper grounding when transferring due to static charge potential
5. Regulatory & Compliance Attributes
- FDA compliant for food contact (check supplier certification)
- Meets RoHS and REACH requirements
- Manufactured under ISO and GMP conditions for industrial materials
6. Environmental & Health Impact
- Biodegradability: Not biodegradable
- Ecotoxicity: Low; inert in the environment
- Bioaccumulation: Not expected to bioaccumulate
- Recyclability: Fully recyclable (PP#5)
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Gloves and eye protection when handling hot resin or during processing
- Handling Guidelines: Minimize dust; avoid overheating during molding
- Storage Measures: Keep containers tightly closed and stored in a dry, clean environment away from open flames and UV exposure
First Aid Measures
- Inhalation: If exposed to fumes, move to fresh air; seek medical attention if symptoms occur
- Skin Contact: Wash with soap and water; treat burns from hot material immediately
- Eye Contact: Rinse with plenty of water; seek medical help if irritation persists
- Ingestion: Not a likely route; seek medical attention if swallowed
Firefighting Measures
- Fire Hazards: Combustible solid; may emit toxic fumes when burning
- Extinguishing Media: Use water spray, foam, dry chemical, or CO₂
- Special Precautions: Firefighters should wear full protective equipment and SCBA
- Hazardous Combustion Products: Carbon monoxide, carbon dioxide, and hydrocarbon fumes
Related products
HDPE Blow HDB5502
HDPE Blow HDB5502 is a high-density polyethylene resin specifically formulated for blow molding applications. It is a semi-crystalline thermoplastic polymer characterized by excellent strength-to-density ratio, high chemical resistance, and superior processability in blow molding equipment. This grade exhibits high stiffness, good environmental stress crack resistance (ESCR), and excellent impact resistance, making it ideal for manufacturing durable hollow containers and complex-shaped products. The resin is supplied as granular pellets with consistent melt flow and homogeneity, optimized for efficient molding cycles and high throughput.
HDPE Injection HMA035/3255
HDPE Injection HMA035/3255 is a high-density polyethylene resin specially formulated for injection molding processes. This grade exhibits excellent flow characteristics with moderate melt flow index optimized for producing precise, high-strength molded parts with superior surface finish. It combines good impact resistance, stiffness, and chemical resistance with excellent dimensional stability. The resin ensures reliable processing performance across a broad temperature range and is suitable for complex, detailed, or large injection-molded components. It is supplied as uniform granules designed for smooth melting and consistent molding cycles.
LLDPE film Opalene F20015
LLDPE film Opalene F20015 is a high-quality linear low-density polyethylene (LLDPE) film known for its excellent clarity, toughness, and flexibility. It is produced using linear low-density polyethylene resin, offering superior mechanical properties and puncture resistance compared to conventional low-density polyethylene films. Opalene F20015 is widely used in packaging applications where strength, transparency, and sealability are critical. Its balanced properties make it suitable for various industrial and consumer packaging needs.
Natural rubber
Natural Rubber is an elastomer harvested from the latex sap of rubber trees (Hevea brasiliensis). It is a highly elastic, resilient, and durable polymer used globally in numerous industries. Natural Rubber is prized for its excellent tensile strength, flexibility, abrasion resistance, and ability to withstand deformation. It is widely utilized in manufacturing tires, industrial goods, footwear, and medical devices. The product is available in various forms such as sheets, blocks, crepes, and latex concentrate.
Polyvinyl Chloride Resin 701
Polyvinyl Chloride Resin 701 is a high-quality suspension-grade polyvinyl chloride resin with a K-value of approximately 70–71, indicating high molecular weight. It is widely used in the production of flexible PVC products where excellent strength, elongation, and plasticizer absorption are required. PVC Resin 701 offers superior mechanical properties, high thermal stability, and good compatibility with plasticizers, making it suitable for calendaring, extrusion, and molding applications in diverse industries.
Polyvinyl Chloride Resin 702
Polyvinyl Chloride Resin 702 is a high molecular weight, suspension-grade polyvinyl chloride resin with a K-value around 70–72. It is specifically formulated for use in soft and flexible PVC products due to its excellent plasticizer absorption and high mechanical strength. Its superior elongation, thermal stability, and processability make it highly suitable for calendaring, extrusion, injection molding, and dip molding operations. PVC Resin 702 is extensively used across the cable, synthetic leather, film, and footwear industries.
PP Raffia 1003
PP Raffia 1003 is a polypropylene homopolymer resin commonly used for manufacturing raffia fibers and woven sacks. It offers high tensile strength, excellent dimensional stability, and good resistance to chemicals and environmental stress. This grade is ideal for producing durable woven fabrics used in packaging, agriculture, and construction applications.
Propylene PP Non Woven RH 38
Propylene PP Non Woven RH 38 is a polypropylene-based non-woven fabric known for its strength, durability, and lightweight properties. Manufactured through a process that binds polypropylene fibers without weaving, it results in a fabric that is breathable, resistant to chemicals and moisture, and highly versatile. This product is widely used in various industrial, medical, and consumer applications where disposable or reusable fabric is needed.
