Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Back to products
Whetstone bridge with pencil jockey
Original price was: $ 34.97.$ 34.83Current price is: $ 34.83.
Stabilizer
Whatsapp Order
Stabilizers are additives used to maintain the physical and chemical properties of materials, preventing degradation caused by heat, light, oxygen, or mechanical stress. This product typically includes compounds like calcium stearate, magnesium stearate, or complex blends tailored for polymers, foods, cosmetics, or pharmaceuticals. They improve durability, shelf life, and performance of various formulations.
Description
Uses
Primary Uses
Polymer Industry
- Heat Stabilization: Prevents thermal degradation during processing of PVC, polyethylene, and other plastics.
- UV Stabilization: Protects polymers from ultraviolet radiation damage.
- Processing Aid: Improves melt flow and processability of plastics.
Food Industry
- Texture Stabilizer: Maintains consistency and viscosity in processed foods like sauces, dressings, and dairy products.
- Emulsion Stabilizer: Prevents separation of oil and water phases.
Cosmetics & Personal Care
- Formulation Stability: Enhances shelf life and prevents phase separation in creams, lotions, and shampoos.
Pharmaceuticals
- Active Ingredient Stabilization: Protects drug formulations from chemical degradation.
- Controlled Release: Used in tablet coatings to control dissolution rates.
Secondary Uses
Paints & Coatings
- Dispersion Stabilizer: Keeps pigments evenly dispersed to prevent settling.
- Rheology Modifier: Enhances flow and application properties.
Adhesives & Sealants
- Shelf Life Extension: Prevents premature curing and maintains performance.
Agriculture
Pesticide Formulation Stabilizer: Enhances stability and efficacy of agrochemicals.
PRODUCT KEY FEATURES
Basic Identification Attributes
- Chemical Name (IUPAC): Varies (e.g., calcium stearate, magnesium stearate)
- Common/Trade Name: Stabilizer
- CAS Number: Depends on formulation components
- HS Code: 3824.99.00 (generic for chemical additives)
- Synonyms: Heat stabilizer, UV stabilizer, processing aid
Physical & Chemical Properties
- Physical State: Powder or granular
- Color & Odor: White to off-white; odorless
- Solubility: Insoluble in water; soluble in organic solvents (varies)
- Density: Approx. 1.0-1.2 g/cm³
Safety & Hazard Attributes
- GHS Classification: Generally not hazardous; depends on specific stabilizer
- Toxicity: Low toxicity; refer to specific component data
- Exposure Limits: Not generally established; follow good industrial hygiene
Storage & Handling Attributes
- Storage Conditions: Store in cool, dry place away from incompatible substances
- Container Type: Bags, drums, or bulk containers
- Shelf Life: Typically 12-24 months
- Handling Precautions: Avoid dust formation; use personal protective equipment
Regulatory & Compliance Attributes
- Complies with relevant FDA and EU regulations depending on application
- Produced under Good Manufacturing Practices (GMP) for food and pharmaceutical grades
- Registered under applicable chemical safety regulations (e.g., REACH)
Environmental & Health Impact
- Biodegradability: Varies; many are not readily biodegradable
- Ecotoxicity: Low to moderate depending on components
Bioaccumulation: Not significant
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Gloves, dust masks recommended
- Handling Guidelines: Use in well-ventilated areas; avoid inhalation of dust
- Storage Measures: Keep containers tightly sealed and away from moisture
First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if irritation occurs
- Skin Contact: Wash with soap and water
- Eye Contact: Rinse with water for 15 minutes; seek medical help if irritation persists
- Ingestion: Rinse mouth; seek medical advice if symptoms develop
Firefighting Measures
- Fire Hazards: Combustible dust hazard in powdered form
- Extinguishing Media: Use foam, dry chemical, or CO₂
Hazardous Combustion Products: Carbon oxides, possible metal oxides
Related products
N-Butanol
N-Butanol (1-butanol) is a four-carbon linear alcohol with the chemical formula C₄H₉OH. It is a colorless, flammable liquid with a mild, alcoholic odor. N-Butanol is widely used as a solvent in paints, coatings, adhesives, and chemical synthesis. It serves as an intermediate in the manufacture of plasticizers, butyl acrylate, and other chemicals. Its moderate volatility and solvent properties make it valuable in industrial and commercial applications.
Polywhite B Chinaclay
Polywhite B Chinaclay, commonly known as Chinaclay, is a naturally occurring, fine white clay mineral primarily composed of kaolinite. It is highly valued for its purity, whiteness, and fine particle size, making it suitable for a variety of industrial applications. Polywhite B improves texture, opacity, and durability in products and is widely used in ceramics, paper, paints, and rubber industries.
PVC Masterbatch
PVC Masterbatch is a concentrated mixture of pigments, additives, or fillers encapsulated in a PVC carrier resin, designed for direct addition into PVC processing applications. It offers an efficient and dust-free way to color, modify, or enhance the physical properties of PVC products. This masterbatch ensures excellent dispersion, consistent coloration, and improved processability. It is widely used in rigid and flexible PVC applications including construction, automotive, packaging, electrical, and consumer products.
PVC PE Wax
PVC PE Wax is a polyethylene-based wax additive used in PVC formulations to improve processing, lubrication, and surface finish. It serves as an internal and external lubricant in both rigid and flexible PVC products, enhancing extrusion, molding, and calendaring operations. It also contributes to better dispersion of fillers and pigments, reduced friction, and improved thermal stability. PE Wax for PVC is available in powder, flake, or granule form and is valued for its compatibility, thermal resistance, and cost-effectiveness.
PVC Resin
PVC Resin (Polyvinyl Chloride Resin) is a white, odorless powder widely used as the base material in the production of both rigid and flexible PVC products. It is produced by polymerizing vinyl chloride monomer (VCM) and is categorized by K-value, which defines molecular weight and processing characteristics. PVC resin is valued for its durability, chemical resistance, electrical insulation, and flame retardancy. It is one of the most versatile plastics used across multiple industries including construction, electrical, automotive, packaging, and healthcare.
PVC Resin 701
PVC Resin 701 is a high-quality suspension-grade polyvinyl chloride resin with a K-value of approximately 70–71, indicating high molecular weight. It is widely used in the production of flexible PVC products where excellent strength, elongation, and plasticizer absorption are required. PVC Resin 701 offers superior mechanical properties, high thermal stability, and good compatibility with plasticizers, making it suitable for calendaring, extrusion, and molding applications in diverse industries.
PVC Westlake 1091
PVC Westlake 1091 is a high-quality, rigid polyvinyl chloride resin known for its excellent clarity, strength, and processability. It is widely used in manufacturing durable and weather-resistant PVC products. This resin grade offers good thermal stability, chemical resistance, and dimensional stability, making it suitable for a broad range of applications including construction materials, packaging, and consumer goods.
Styrene Acrylic Emulsion Polymer
Styrene Acrylic Emulsion Polymer is a water-based copolymer emulsion combining styrene and acrylic monomers, designed as a versatile binder with excellent film formation, adhesion, and durability. Widely used across paints, coatings, adhesives, textiles, and construction materials, this polymer offers superior weather resistance, water repellency, and flexibility. Its emulsified form enables easy incorporation into aqueous formulations, delivering enhanced performance and environmental benefits by reducing VOC emissions.
