Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Eagle Homopolymer 510/50
Eagle Homopolymer 510/50 50% is a high-purity homopolymer solution, typically referring to polyvinyl alcohol (PVA) or a similar water-soluble polymer supplied at 50% concentration. This product offers excellent film-forming, adhesive, thickening, and stabilizing properties, making it versatile in applications such as adhesives, textile sizing, paper coating, and packaging. The homopolymer’s controlled molecular weight and solution viscosity provide consistent performance and ease of handling. The 50% aqueous solution form facilitates easy mixing and incorporation into various formulations.
Eagle Homopolymer 510/50
Primary Uses
- Adhesives & Coatings
- Used as a binder and film-former in adhesives for paper, packaging, and woodworking industries.
- Provides strong adhesion with excellent clarity and flexibility in glue applications.
- Functions as a coating agent in paper and textile industries to improve surface properties and printability.
- Textile Industry
- Applied as a sizing agent to strengthen yarns and reduce breakage during weaving.
- Improves fabric smoothness and handle.
- Enhances dye uptake and uniformity in textile finishing processes.
- Paper Industry
- Used in paper coating formulations to improve gloss, strength, and printability.
- Acts as a stabilizer and thickener in coating pastes and pigment suspensions.
- Packaging & Films
- Forms biodegradable films with good mechanical properties for food packaging and industrial use.
- Used in biodegradable mulch films and release liners.
- Pharmaceutical & Cosmetic Applications
- Serves as a film-forming agent in pharmaceutical coatings and topical formulations.
- Acts as a thickener and stabilizer in cosmetic emulsions and gels.
Secondary Uses
- Construction Industry
- Incorporated in cement and mortar formulations as a water retention and plasticizing agent.
- Agriculture
- Used in controlled-release fertilizer coatings and seed treatment formulations.
- Chemical Industry
- Functions as a protective colloid and stabilizer in polymer dispersions and emulsions.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Polyvinyl alcohol (PVA) homopolymer aqueous solution
- Common/Trade Name: Eagle Homopolymer 510/50 50%
- CAS Number: 9002-89-5 (for polyvinyl alcohol)
- HS Code: 3905.30.00
- Molecular Formula: (C₂H₄O)n (polymer repeat unit)
- Synonyms:
- PVA solution
- Polyvinyl alcohol homopolymer
- Vinyl alcohol polymer solution
2. Physical & Chemical Properties
- Physical State: Clear to slightly hazy viscous liquid (50% aqueous solution)
- Color & Odor: Colorless to pale yellow; mild odor
- pH: Typically 5–8
- Viscosity: Variable depending on molecular weight and concentration; typically 300–2000 cps at 20°C
- Solubility: Soluble in water; insoluble in most organic solvents
- Stability: Stable under normal storage; sensitive to microbial contamination if diluted
3. Safety & Hazard Attributes
- Hazard Class (GHS): Not classified as hazardous
- Toxicity: Low toxicity; non-irritating to skin and eyes in typical use
- Exposure Limits: Not established; follow general chemical safety protocols
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry place away from freezing and direct sunlight
- Container Type: Plastic drums or totes
- Shelf Life: 12–24 months if stored properly
- Handling Precautions: Avoid microbial contamination; use biocides if required
5. Regulatory & Compliance Attributes
- Approved for use in pharmaceuticals, food packaging, and cosmetics under relevant regulations
- Complies with REACH and other environmental safety regulations
6. Environmental & Health Impact
- Biodegradability: Biodegradable under aerobic conditions
- Ecotoxicity: Low aquatic toxicity
- Bioaccumulation: Not expected
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic or mutagenic
Safety Handling Precautions
PPE Required:
- Gloves (nitrile or latex)
- Safety goggles
- Protective clothing as needed
Handling Guidelines:
- Avoid prolonged skin contact
- Use in well-ventilated areas
- Prevent microbial contamination during dilution and use
Storage Measures:
- Keep containers tightly sealed
- Store away from freezing and heat sources
- Prevent contamination by microorganisms
Hygiene Practices:
- Wash hands thoroughly after handling
- Avoid eating, drinking, or smoking in work areas
- Clean spills promptly to prevent slip hazards
First Aid Measures
- Inhalation: Move to fresh air if irritation occurs
- Skin Contact: Wash with soap and water; seek medical advice if irritation develops
- Eye Contact: Rinse eyes with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Rinse mouth; seek medical advice if discomfort occurs
Firefighting Measures
- Fire Hazards: Non-flammable in aqueous form; may decompose at high temperatures producing carbon monoxide and dioxide
- Extinguishing Media: Water spray, foam, dry chemical, or carbon dioxide
- Special Precautions: Use standard protective firefighting equipment
- Decomposition Products: Carbon oxides and minor hydrocarbons on combustion
Related products
Beeswax
Beeswax is a natural wax produced by honeybees of the genus Apis. It is secreted by worker bees from specialized glands and used to build honeycomb cells. Beeswax is a complex mixture of esters, fatty acids, and hydrocarbons, characterized by a pale yellow to brown color, a pleasant honey-like aroma, and a firm yet pliable texture. It has excellent emulsifying, binding, and protective properties, making it widely used in cosmetics, pharmaceuticals, food, and industrial applications. Beeswax is prized for its natural origin, biodegradability, and skin-friendly characteristics.
Binder
A binder is a broad category of substances—organic or inorganic—used to hold different materials together in a cohesive mass. Common binders include natural polymers (starch, cellulose derivatives, proteins), synthetic resins (PVA, acrylics, phenolics), and inorganic binders (clays, cement, lime). They are essential in industries such as pharmaceuticals, construction, coatings, ceramics, adhesives, and printing, where they provide structural integrity, adhesion, and controlled release properties.
Hycryl
Hycryl is a specialized acrylic copolymer resin designed primarily for industrial and cosmetic applications. It appears as a white to off-white powder or granules with excellent film-forming, adhesive, and thickening properties. Known for its compatibility with a wide range of solvents and plasticizers, Hycryl 77 provides excellent clarity, flexibility, and durability in coatings, adhesives, and personal care formulations. Its balanced molecular weight and functional groups enable it to deliver strong binding and aesthetic properties in both aqueous and solvent-based systems.
Lacitex
Lacitex is a high-quality natural latex concentrate derived from Hevea brasiliensis (rubber tree) latex. It is a milky, white colloidal suspension primarily used in the manufacture of latex-based products such as gloves, adhesives, coatings, and foam rubber. Lacitex offers excellent film-forming properties, elasticity, and tensile strength. It provides superior binding, water resistance, and flexibility in finished products, making it widely valued in various industrial and manufacturing applications.
Latex
Latex is a natural or synthetic colloidal dispersion of polymer microparticles in an aqueous medium. Natural latex is harvested from rubber trees (Hevea brasiliensis) and appears as a milky fluid rich in rubber particles suspended in water. Synthetic latexes are produced from various monomers such as styrene-butadiene or acrylics. Latex exhibits excellent elasticity, flexibility, and adhesive properties. It is widely used in manufacturing gloves, balloons, coatings, adhesives, paints, and various molded products. Its film-forming ability, water resistance, and durability make it a versatile material across industries.
Medium Binder
Medium Binder is a versatile adhesive and binding agent formulated to enhance cohesion, strength, and durability in various industrial and construction applications. It improves the bonding properties between different materials, providing a reliable and consistent bond that resists environmental degradation. Medium Binder is suitable for use in composites, coatings, and concrete formulations, optimizing performance and structural integrity.
Shellac
Shellac is a natural resin secreted by the lac insect, primarily found in South Asia. It is processed into flakes or powder form and dissolved in alcohol to create a versatile film-forming agent. Shellac provides excellent adhesion, gloss, and moisture resistance, making it widely used as a wood finish, food glaze, and pharmaceutical coating. It is valued for its natural origin, biodegradability, and safe use in food and cosmetic applications.
Short Oil Fast Drying (16/50) (SDA)
Short Oil Fast Drying (16/50) (SDA) Stand & Detail Alkyd (SDA) is a specially formulated alkyd resin designed for rapid drying and excellent film formation in coatings. It contains approximately 16% oil length, offering a balance between hardness and flexibility, and 50% solids content, which aids in build and coverage. This resin is widely used in industrial and decorative paints where quick drying and good adhesion are critical. Its fast curing properties make it ideal for applications requiring reduced downtime and enhanced productivity.
