Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Activated Carbon (Charcoal)
Original price was: $ 7.00.$ 6.81Current price is: $ 6.81.
Activated carbon is a highly porous, adsorptive material processed to have an exceptionally large surface area (typically 500-1500 m²/g) through thermal or chemical activation of carbon-rich source materials. This versatile adsorbent exists in powdered (PAC), granular (GAC), pelletized, and extruded forms, with pore structures specifically engineered for different applications ranging from water purification to gas treatment. Its extended surface area and complex pore network (micropores <2nm, mesopores 2-50nm, macropores >50nm) enable superior physical adsorption of contaminants through van der Waals forces, as well as chemical interactions with surface functional groups.
Activated Carbon
Primary Uses
- Water Purification
- Removes chlorine, organic contaminants, and heavy metals (e.g., lead, mercury) from drinking water.
- Used in household filters (Brita), municipal treatment plants, and aquariums.
- Air & Gas Filtration
- Captures VOCs (volatile organic compounds), odors, and toxic gases (e.g., in industrial scrubbers, HVAC systems).
- Essential in gas masks, car cabin filters, and cigarette filters.
- Medical & Pharmaceutical
- Poison/toxin treatment (emergency antidote for drug overdoses).
- Used in kidney dialysis machines to filter blood toxins.
- Food & Beverage Industry
- Decolorizes sugar, oils, and alcoholic beverages (e.g., vodka, whiskey).
- Removes off-flavors and impurities in food processing.
- Gold Mining & Metal Recovery
- Extracts gold from cyanide solutions via adsorption (CIP/CIL processes).
Secondary Uses
- Soil Remediation
- Treats pesticide/herbicide contamination in agriculture.
- Electronics & Energy Storage
- Used in supercapacitors and battery electrodes for high surface area.
- Beauty & Skincare
- Found in detoxifying face masks, toothpaste, and deodorants.
- Wine & Coffee Production
- Adjusts tannin levels and removes bitterness.
- Industrial Catalysis
- Supports chemical catalysts in reactions like hydrogenation.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Carbon, activated
- Common/Trade Names:
- Activated charcoal
- Active carbon
- AC (abbreviation)
- CAS Number: [7440-44-0] (for carbon)
- HS Code: 3802.10.00 (activated carbon)
- Molecular Formula: C (amorphous, high surface area)
- Synonyms:
- Decolorizing carbon
- Adsorbent carbon
- Filter carbon
2. Physical & Chemical Properties
- Physical State: Fine black powder, granules, or pellets
- Color & Odor: Black; odorless
- Melting Point: Sublimes at ~3,650°C (does not melt)
- Boiling Point: N/A (sublimes)
- Density:
- Bulk density: 0.25–0.60 g/cm³
- True density: ~2.0 g/cm³
- Surface Area: 500–1,500 m²/g (BET method)
- Porosity:
- Microporous (<2 nm)
- Mesoporous (2–50 nm)
- Macroporous (>50 nm)
- Solubility: Insoluble in water and organic solvents
- pH Level: 6–11 (depends on activation method)
- Moisture Content: ≤10% (as shipped)
- Ash Content: ≤5% (typical)
3. Safety & Hazard Attributes
- Hazard Class (GHS):
- Not classified as hazardous (non-toxic)
- May cause dust irritation (mechanical hazard)
- NFPA Ratings:
- Health: 1
- Flammability: 1 (dust can be combustible)
- Reactivity: 0
- Exposure Limits:
- OSHA PEL (Carbon Black): 3.5 mg/m³ (respirable)
- ACGIH TLV: 10 mg/m³ (inhalable particles)
- Reactivity:
- Stable under normal conditions
- Reacts with strong oxidizers (e.g., peroxides, chlorine)
- Can catalyze certain chemical reactions
4. Storage & Handling Attributes
- Storage Conditions:
- Dry, cool, well-ventilated area
- Keep away from oxidizers and moisture
- Incompatible Materials:
- Strong oxidizers (e.g., perchlorates, nitrates)
- Halogens (e.g., chlorine, fluorine)
- Container Type:
- Sealed bags (polypropylene-lined)
- Fiber drums (for bulk storage)
- Shelf Life: Indefinite if stored properly
- Special Handling:
- Use dust masks (NIOSH N95) in high-dust areas
- Ground equipment to prevent static sparks
5. Regulatory & Compliance Attributes
- Regulatory Status:
- FDA (USA): Approved for food/water treatment (21 CFR 173.225)
- EU: Compliant with REACH, food-grade (E153)
- NSF/ANSI 61: Certified for drinking water
- Hazard Symbols (GHS): None (non-hazardous)
- Transportation Restrictions:
- Not regulated as hazardous material
- UN number: None (unless wetted, then UN1362)
- Waste Disposal:
- Non-hazardous waste (landfill or reactivation)
- Spent carbon may require special disposal (if contaminated)
6. Environmental & Health Impact
- Ecotoxicity:
- Non-toxic to aquatic life (LC50 >100 mg/L)
- Persistence in Environment:
- Does not degrade (inert)
- Can be reactivated/reused
- Carcinogenicity:
- IARC: Not classified (Group 3)
- NTP: Not listed
- Biodegradability: Non-biodegradable
Safety Precautions
Personal Protective Equipment (PPE):
- Respiratory Protection: NIOSH-approved N95 mask (for dust)
- Eye Protection: Safety goggles (if dust is airborne)
- Gloves: Nitrile or latex (to prevent skin irritation)
- Clothing: Long sleeves + lab coat (for dust control)
Handling & Storage:
- Minimize dust generation (use closed systems or wet methods)
- Store in a dry, well-ventilated area (away from oxidizers)
- Ground containers (static electricity can ignite fine dust)
- Avoid open flames/sparks (dust can be explosive at high concentrations)
Hygiene Practices:
- No eating/drinking in handling areas
- Wash hands after use
- Use local exhaust ventilation (LEV) if handling large quantities
First Aid Measures
Inhalation (Dust):
- Move to fresh air
- Seek medical help if breathing difficulty persists
Eye Contact:
- Rinse with water for 15 minutes
- Seek medical attention if irritation continues
Skin Contact:
- Wash with soap and water
- Apply moisturizer if dryness occurs
Ingestion:
- Rinse mouth with water
- Drink water to dilute
- Seek medical advice if large amounts are swallowed
Firefighting Measures
Fire Hazards:
- Combustible dust (can explode at high concentrations in air)
- No flash point (but smolders if ignited)
Extinguishing Media:
✔ Water spray (best for smoldering carbon)
✔ Dry chemical powder
✔ CO₂
Firefighting Precautions:
- Do NOT use water jets (can spread dust)
- Wear SCBA (self-contained breathing apparatus)
- Cool nearby containers with water spray
Spill & Disposal
Small Spills:
- Wear a dust mask
- Sweep up carefully (avoid raising dust)
- Place in sealed container
Large Spills:
- Dampen with water to control dust
- Use industrial vacuum (explosion-proof if available)
Disposal:
- Dispose as non-hazardous waste (unless contaminated)
- Follow local regulations
Related products
Acticide HF (Incan)
Acticide HF is a proven, broad-spectrum industrial biocide manufactured by Thor Group specifically for in-can preservation of water-based industrial products. It is a clear, colorless to pale blue or pale green liquid with a mild odor, designed for easy incorporation into aqueous formulations. The product is based on a synergistic combination of active ingredients including 5-Chloro-2-methyl-4-isothiazolin-3-one (CIT), 2-Methyl-4-isothiazolin-3-one (MIT), and formaldehyde. This well-established formulation protects water-based formulations against bacteria, molds, and yeasts, ensuring product stability and extended shelf life across demanding conditions. Technical grade Acticide HF is manufactured for industrial use and is not intended for direct human consumption, medical applications, or food preservation.
Benzyl Konium Chloride
Benzyl Konium Chloride (BAC) 50% is a quaternary ammonium compound with potent antimicrobial and disinfectant properties. It is a cationic surfactant widely used for its bactericidal, fungicidal, and virucidal effects. This clear to pale yellow liquid concentrate is highly soluble in water and is commonly used in healthcare, sanitation, and industrial hygiene applications. BAC 50% solutions serve as active ingredients in disinfectants, sanitizers, and antiseptics due to their effectiveness against a broad spectrum of microorganisms.
Bronopol
Bronopol (2-Bromo-2-nitropropane-1,3-diol) is a water-soluble, white crystalline powder or granules with a slight odor. It is a synthetic antimicrobial agent widely used as a preservative in personal care products, pharmaceuticals, cosmetics, and industrial applications. Bronopol exhibits broad-spectrum bactericidal and fungicidal activity, making it effective against a wide range of microorganisms. It works by releasing active formaldehyde slowly, which disrupts microbial metabolism and reproduction.
Busan
Busan is a brand name associated with a comprehensive range of specialty chemicals, primarily including surfactants, dispersants, and performance additives. These products are engineered to optimize the properties of coatings, paints, inks, adhesives, and other industrial formulations. Busan specialty chemicals enhance formulation stability, improve pigment dispersion, control rheology, and boost wetting and flow characteristics, leading to superior application and end-use performance. Designed for versatility and efficiency, Busan products are widely used across the coatings, printing, plastics, and chemical manufacturing industries.
Citric Acid Monohydrate
Citric Acid Monohydrate is a white, crystalline powder or granule form of citric acid containing one molecule of water per molecule of acid. It is a natural organic acid commonly derived from citrus fruits or produced by fermentation processes. Citric Acid Monohydrate is widely used as an acidulant, preservative, and chelating agent in various industries. Compared to the anhydrous form, it has a slightly lower acid concentration due to the water molecule but offers excellent solubility and stability. It is prized for its sour flavor, buffering capacity, and ability to bind metal ions, making it indispensable in food, pharmaceutical, cosmetic, and industrial applications.
Indion Cation Resin
Indion Cation Resin is a synthetic ion exchange resin designed primarily for the removal of positively charged ions (cations) from water and various liquid streams. Typically composed of a sulfonated polystyrene-divinylbenzene (PS-DVB) copolymer, this resin features a highly porous bead structure with functional groups that exchange hydrogen or sodium ions for calcium, magnesium, iron, and other metallic cations. Available in different forms (strong acid cation, weak acid cation), Indion Cation Resin is widely used in water treatment, industrial processes, and purification systems.
Lysol (Cresol BP)
Lysol (Cresol BP) is a concentrated solution of cresol, a phenolic compound derived from coal tar or petroleum. It is a potent disinfectant and antiseptic with strong antimicrobial properties. This product typically contains 50% cresol in water or solvent and is used extensively in industrial, healthcare, agricultural, and household settings for its broad-spectrum efficacy against bacteria, fungi, and viruses. It appears as a colorless to pale yellow liquid with a characteristic phenolic odor and is highly effective for sterilization, deodorization, and sanitation.
Tricide 30E
Tricide 30E is a versatile emulsifiable concentrate formulation primarily used as a broad-spectrum biocide. It is designed to control bacterial, fungal, and algal growth in industrial water treatment, cooling towers, paper mills, and oilfield applications. The product combines potent antimicrobial agents to effectively inhibit microbial contamination, biofilm formation, and corrosion, thereby enhancing system efficiency and longevity. Tricide 30E is favored for its ease of use, stability in diverse water chemistries, and strong efficacy against a wide range of microorganisms.
