Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Bitumen Primer Extra Pure
Bitumen Primer Extra Pure is a high-purity, low-viscosity liquid used in laboratory and industrial research involving adhesion studies, waterproofing technologies, and material compatibility testing. It consists primarily of refined bitumen dissolved in a suitable solvent, allowing it to penetrate and seal porous substrates like concrete, masonry, or metal. In laboratory contexts, it is used to study the behavior of protective coatings, surface treatments, and corrosion resistance. The extra pure grade ensures minimal impurities and uniform consistency, supporting accurate and reproducible test results. Bitumen Primer should be stored in a tightly closed container in a well-ventilated area, away from heat sources, sparks, and open flames
Bitumen Primer Extra Pure
Primary Uses
- Material Adhesion Testing
- Used in laboratory tests of bonding strength between bituminous layers and various substrates (e.g., concrete, metal, glass) for civil or materials engineering studies.
- Formulation Studies
- Serves as a base compound in lab-scale modification experiments (e.g., adding polymers, resins, or solvents to study effects on drying time, viscosity, and adhesion).
- Analytical Characterization
- Investigated using techniques like GC-MS, FTIR, or TGA to analyze composition, volatility, and thermal behavior of bituminous coatings.
- Waterproofing Material Simulation
- Used in small-scale simulations of waterproofing systems, helping researchers study moisture barriers and coating performance under controlled conditions.
Secondary Uses
- Educational Demonstrations
- Used in civil engineering or construction chemistry labs to demonstrate priming methods, penetration properties, and setting behavior.
- Corrosion Protection Studies
- Tested as a corrosion-resistant primer in metal exposure experiments, particularly under salt spray or humid environments.
- Comparative Coating Performance Research
- Used alongside synthetic and eco-friendly alternatives in studies comparing environmental impact and durability.
- Binder Compatibility Studies
- Investigated for interaction with asphalt, aggregates, and additives in binder blend compatibility testing.
| PACK SIZE | 25 grams Plastic Tin |
|---|
1. Basic Identification Attributes
- Product Name: Bitumen Primer Extra Pure
- General Description: A high-purity, solvent-based bituminous primer designed for adhesion promotion in waterproofing tests, material compatibility studies, and sample preparations in lab settings.
- CAS Number: Mixture (primary components include Bitumen [CAS: 8052-42-4] + hydrocarbon solvents)
- HS Code: 2715.00.00 (Bituminous mixtures)
- Grade: Extra Pure (suitable for controlled lab applications)
- Composition:
- Refined bitumen (asphalt)
- Solvents like mineral spirits, naphtha, or toluene
2. Physical & Chemical Properties
- Physical State: Liquid
- Appearance: Dark brown to black viscous liquid
- Odor: Strong petroleum-like odor
- Boiling Point: 120–200 °C (depending on solvent blend)
- Flash Point: ~35–45 °C (flammable)
- Density: ~0.90–1.05 g/cm³
- Solubility:
- Water: Insoluble
- Organic solvents: Soluble in aliphatic and aromatic hydrocarbons
- Viscosity: Medium to high
- Vapor Pressure: Moderate (due to solvent content)
3. Safety & Hazard Attributes
- GHS Classification:
- Flammable Liquid (Category 3)
- Skin Irritant (Category 2)
- Specific Target Organ Toxicity – Single Exposure (Category 3)
- GHS Pictograms:
⚠️ 🔥 - NFPA Ratings:
- Health: 2
- Flammability: 3
- Reactivity: 0
- Primary Hazards in Lab:
- Flammable vapors
- Skin/eye irritation
- Inhalation hazard from fumes
- Personal Protective Equipment (PPE):
- Nitrile gloves, safety goggles, lab coat
- Use in fume hood when heated or sprayed
4. Storage & Handling Attributes
- Storage Conditions:
- Store in flammable chemical cabinet
- Keep container tightly closed
- Protect from heat, sparks, open flame
- Incompatible Materials:
- Oxidizing agents, strong acids, alkalis
- Container Type:
- Metal or solvent-resistant plastic with sealed lid
- Shelf Life:
- Up to 2 years under proper storage
- Handling Notes (Lab):
- Mix thoroughly before use
- Avoid skin contact and fume inhalation
5. Regulatory & Compliance Attributes
- Regulatory Status:
- Regulated for flammability and VOC content
- Not classified as carcinogenic in pure lab-grade form, but prolonged exposure may carry risk (depending on bitumen refinement)
- Transportation Restrictions:
- UN 1999, Class 3 (Flammable liquid, n.o.s.)
- Must follow DG transport guidelines
- Disposal Method:
- Hazardous waste – collect and dispose of per local environmental regulations
6. Environmental & Health Impact
- Ecotoxicity: Harmful to aquatic life (due to hydrocarbon solvents)
- Persistence: Bitumen components are persistent in the environment
- Bioaccumulation: Low to moderate depending on solvent type
Carcinogenicity: Potential concern only if polycyclic aromatic hydrocarbons (PAHs) are present — not typical in extra pure lab grade
SAFETY PRECAUTIONS
- Personal Protective Equipment (PPE):
- Wear chemical-resistant gloves, lab coat, and safety goggles.
- Use respiratory protection if adequate ventilation is not ensured.
- Handling:
- Handle in a well-ventilated fume hood due to the presence of volatile organic solvents.
- Avoid inhalation, skin contact, and eye exposure.
- Keep away from sparks, flames, and heat sources – product is highly flammable.
- Storage:
- Store in a cool, well-ventilated area, away from direct sunlight and ignition sources.
- Keep the container tightly closed when not in use.
- Ground/bond container and receiving equipment to prevent static discharge.
- Hygiene Measures:
- Wash thoroughly after handling.
- Do not eat, drink, or smoke in areas where the product is used or stored.
FIRST AID MEASURES
- Inhalation:
- Remove the victim to fresh air.
- If breathing is difficult, administer oxygen.
- Seek immediate medical attention.
- Skin Contact:
- Wash with soap and water.
- Remove contaminated clothing.
- Seek medical attention for irritation or burns.
- Eye Contact:
- Flush immediately with plenty of water for at least 15 minutes.
- Hold eyelids open during flushing.
- Seek medical help promptly.
- Ingestion:
- Do not induce vomiting (may cause aspiration into lungs).
- Rinse your mouth if conscious.
- Get immediate medical assistance.
FIRE FIGHTING MEASURES
- Extinguishing Media:
- Use foam, dry chemical powder, carbon dioxide (CO₂).
- Do not use water jets (can spread the fire).
- Fire Hazards:
- Highly flammable — vapors may form explosive mixtures with air.
- Combustion releases toxic fumes: carbon monoxide, carbon dioxide, and smoke.
- Protective Equipment for Firefighters:
- Wear self-contained breathing apparatus (SCBA).
- Use full protective firefighting gear.
- Explosion Risk:
- Vapors can travel along surfaces to a distant ignition source.
- Ensure proper grounding during transfer operations.
Related products
Aquaguard
Aquaguard is a brand name commonly associated with water purification products and filtration systems designed to provide safe, clean drinking water. These systems typically use technologies such as UV purification, RO (reverse osmosis), UF (ultrafiltration), and activated carbon filters to remove contaminants including bacteria, viruses, dissolved salts, heavy metals, and suspended particles. Aquaguard products are widely used in residential, commercial, and industrial settings to improve water quality, taste, and safety. The brand encompasses water purifiers, filters, and treatment units tailored to different water sources and purity requirements.
Blotting Paper
Blotting Paper is a highly absorbent, unsized paper made from purified cellulose, used primarily for absorbing excess liquids such as ink, oils, and solvents. In laboratory and industrial settings, it is critical for procedures requiring rapid and uniform absorption without chemical interference. Its porous and capillary-active nature makes it ideal for blotting techniques in analytical chemistry, biology (such as electrophoresis or Western blotting), and precision cleaning tasks. Blotting paper is available in various thicknesses and porosities to suit specific tasks, from fine analytical work to heavy-duty industrial absorption needs.
Octyl Methoxycinnamate Extra Pure
Octyl Methoxycinnamate Extra Pure is a high-purity organic compound widely used as a UV-B filter in sunscreen formulations and personal care products. Known chemically as Ethylhexyl Methoxycinnamate, it functions by absorbing ultraviolet light in the 280–320 nm range, thereby protecting skin from sunburn and photoaging.
In its Extra Pure form, OMC offers exceptional quality for cosmetic-grade applications, pharmaceutical formulations, and research requiring stringent purity levels. It is typically a clear, oily liquid with good solubility in oils and alcohols, making it ideal for incorporation into emulsions, creams, and lotions. Aside from its cosmetic uses, it is occasionally used in plastic and polymer stabilization where UV protection is needed. It should be stored in cool, dark conditions to maintain its stability and efficacy.
Polyglycerol-10-Laurate Extra Pure
Polyglycerol-10-laurate Extra Pure is a high-purity, non-ionic surfactant and emulsifier composed of ten glycerol units esterified with lauric acid. This versatile compound is especially valued in cosmetic, pharmaceutical, and food-grade applications where ultra-high purity and biocompatibility are critical.
Known for its excellent emulsifying, dispersing, and solubilizing properties, Polyglycerol-10-laurate is widely used in formulations for creams, lotions, and other personal care products, particularly those designed for sensitive skin. In pharmaceuticals, it aids in enhancing bioavailability and improving the stability of active ingredients, while in food applications, it serves as a safe emulsifier and texturizer, often used in dairy and confectionery products.
Polyglyceryl Extra Pure
Polyglyceryl Extra Pure refers to a high-purity class of non-ionic surfactants and emulsifiers derived from glycerol units. These compounds are widely used in cosmetics, pharmaceuticals, and food formulations due to their excellent skin compatibility, emulsifying properties, and biodegradability.
Polyglyceryls come in various forms (e.g., Polyglyceryl-3, Polyglyceryl-6, Polyglyceryl-10), each offering different levels of hydrophilicity and emulsifying strength. In cosmetics, they help create stable oil-in-water emulsions, ideal for lotions, creams, cleansers, and sunscreens. In pharmaceuticals, their non-toxic and non-irritating nature makes them suitable carriers for active ingredients. In food products, they function as safe emulsifiers and stabilizers, supporting clean-label and natural product development.
This extra pure grade ensures low impurity levels, minimal odor, and consistent performance, making it ideal for sensitive applications. Store tightly sealed in a cool, dry place away from heat and light to maintain its stability and quality.
Potassium Carbonate Extra Pure
Potassium Carbonate Extra Pure is a high-purity, white, hygroscopic, water-soluble salt with the chemical formula K₂CO₃. It is known for its alkaline properties and exceptional solubility in water, forming a strongly basic solution that is widely used in laboratory and industrial processes. Its Extra Pure grade ensures it meets stringent standards for research, analytical, and high-spec formulation work.
This compound is essential in buffer preparation, pH adjustment, and titration analysis in laboratory chemistry. It also serves as a drying agent for certain solvents and gases due to its moisture-absorbing nature. In industrial applications, Potassium Carbonate is a key ingredient in the manufacture of glass, soaps, and dyes, and is also used in fermentation processes to control acidity. In the food industry, it functions as a food additive (E501), commonly used as a buffering or raising agent in baking.
To maintain its quality, Potassium Carbonate Extra Pure should be stored in a tightly sealed container, in a dry and cool environment, away from acids and moisture, as it readily absorbs water and carbon dioxide from the air. Proper handling using protective gloves and eye protection is advised, especially in concentrated solutions, due to its caustic nature.
Sika Armatec 110
Sika Armatec 110 is a high-performance, corrosion-inhibiting bonding and anti-corrosion primer designed for use on steel reinforcement and concrete surfaces. It forms a strong adhesive layer between old and new concrete and provides excellent protection against corrosion of embedded steel bars. This ready-to-use, single-component product enhances the durability and longevity of reinforced concrete structures, especially in aggressive environments.
Sodium Benzoate Extra Pure
Sodium Benzoate Extra Pure is a white crystalline powder used primarily as a food preservative (E211) and antimicrobial agent. It is widely applied in food, pharmaceutical, and cosmetic industries to prevent microbial growth and extend shelf life. Its stable and non-toxic nature makes it suitable for various laboratory and industrial applications. Proper storage and handling are recommended to maintain its purity and prevent irritation.
