Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fragrance (Cosmetics)
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
HPMC Vivapharm E50
HPMC Vivapharm is a high-quality, pharmaceutical-grade hydroxypropyl methylcellulose polymer widely used as an excipient and functional ingredient. It appears as a fine, white to off-white, odorless powder with excellent solubility in cold water and forms clear, viscous solutions. This cellulose ether derivative offers excellent film-forming, thickening, emulsifying, and controlled-release properties. Vivapharm E50 is prized in pharmaceutical, food, and cosmetic industries for its versatility, stability, and safety profile.
HPMC Vivapharm E50
Primary Uses
- Pharmaceutical Industry
- Used as a tablet binder and film former in oral solid dosage forms to improve tablet integrity and controlled drug release.
- Acts as a matrix former in sustained-release formulations, providing controlled dissolution profiles for active pharmaceutical ingredients.
- Functions as a disintegrant or swellable excipient to facilitate tablet disintegration where required.
- Utilized as a suspending agent and viscosity enhancer in liquid oral formulations and ophthalmic preparations.
- Serves as a protective coating agent for tablets and capsules to mask taste and improve stability.
- Food Industry
- Employed as a thickener, stabilizer, and emulsifier in sauces, dressings, bakery products, and dairy alternatives.
- Used as a gluten substitute or additive in gluten-free baked goods to improve texture and moisture retention.
- Enhances mouthfeel and shelf-life in low-fat and reduced-calorie food formulations.
- Cosmetics and Personal Care
- Functions as a thickening agent and film former in lotions, creams, shampoos, and conditioners.
- Provides stabilization in emulsions and suspensions, preventing ingredient separation.
- Used in hair gels and styling products for desired viscosity and texture.
- Industrial Applications
- Acts as a rheology modifier in paints, adhesives, and printing inks to control flow properties.
- Used in construction materials such as tile adhesives and cementitious coatings to improve workability and water retention.
Secondary Uses
- Biomedical Research
- Used as a hydrogel base for drug delivery and tissue engineering studies.
- Employed in cell culture media as a viscosity modifier.
- Agriculture
- Utilized as a carrier or binder in pesticide formulations to improve adhesion and controlled release.
- Packaging
- Incorporated into biodegradable films and edible coatings for food packaging applications.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Hydroxypropyl methylcellulose
- Common/Trade Name: HPMC Vivapharm E50
- CAS Number: 9004-65-3
- HS Code: 3912.90.00
- Molecular Formula: C56H108O30 (approximate polymer unit)
- Synonyms: Hypromellose; Methylhydroxypropyl cellulose; Methocel E50
2. Physical & Chemical Properties
- Physical State: Fine powder
- Color & Odor: White to off-white; odorless
- Viscosity (2% aqueous solution): ~50 mPa·s at 20°C
- Solubility: Soluble in cold water, insoluble in hot water and organic solvents
- pH (1% solution): Neutral to slightly alkaline (6.5–8.5)
- Thermal Stability: Stable up to ~200°C
- Film-Forming Ability: Excellent, clear films upon drying
3. Safety & Hazard Attributes
- GHS Classification: Non-hazardous; Generally Recognized As Safe (GRAS)
- Toxicity: Non-toxic and non-irritant at typical use levels
- Exposure Limits: No specific occupational exposure limits
4. Storage & Handling Attributes
- Container Type: Sealed polyethylene bags or drums with moisture barrier
- Storage Conditions: Store in cool, dry place away from moisture and direct sunlight
- Shelf Life: Up to 36 months if stored properly
- Handling Notes: Avoid dust generation; use dust masks in bulk handling
5. Regulatory & Compliance Attributes
- Approved for pharmaceutical use by USP, EP, JP
- Food additive status approved by FDA (E464) and EFSA
- Complies with REACH and other global chemical regulations
6. Environmental & Health Impact
- Biodegradability: Biodegradable under aerobic conditions
- Ecotoxicity: Low environmental toxicity
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified
Safety Handling Precautions
- PPE Required: Dust mask, gloves, and safety goggles recommended during powder handling
- Handling Guidelines: Use in well-ventilated areas; avoid dust accumulation
- Hygiene Practices: Wash hands after handling; avoid inhalation of dust
First Aid Measures
- Inhalation: Move to fresh air if respiratory irritation occurs
- Skin Contact: Wash with soap and water if irritation develops
- Eye Contact: Rinse thoroughly with water for 15 minutes; seek medical advice if irritation persists
- Ingestion: Generally regarded as safe; seek medical advice if excessive ingestion occurs
Firefighting Measures
- Fire Hazards: Non-flammable, but may burn under extreme heat
- Extinguishing Media: Water spray, foam, dry chemical, or CO₂
- Special Precautions: Avoid inhalation of smoke from burning material
- Combustion Products: Carbon oxides and other organic compounds
Related products
Almond Bitter Oil
Almond Bitter Oil, derived from the kernels of bitter almonds (Prunus amygdalus var. amara), is an essential oil known for its sharp, nutty, and marzipan-like aroma. This oil is produced through steam distillation of crushed bitter almond kernels and contains a naturally occurring compound called benzaldehyde, which gives it its characteristic scent. In purified form (free of hydrogen cyanide), bitter almond oil is used in fragrance, flavoring, and pharmaceutical applications.
Due to its potent aroma and biochemical properties, it is widely used in perfumery, baked goods flavoring (in controlled quantities), aromatherapy, and traditional topical remedies. It is important to distinguish between natural bitter almond oil, which must be detoxified, and synthetic benzaldehyde, which is commonly used as a substitute in commercial formulations.
Bitter Masking Pharmaceutical Liquid flavors
Bitter Masking Pharmaceutical Liquid Flavors are specially formulated liquid flavors designed to mask the bitter taste of active pharmaceutical ingredients (APIs). These flavors improve the palatability of oral syrups, suspensions, and liquid medications, enhancing patient compliance. Compatible with various pharmaceutical formulations, they exhibit excellent solubility and stability in aqueous systems and provide a pleasant taste profile without affecting the efficacy of the medication.
Cellulose Acetate Phthalate (CAP)
Cellulose Acetate Phthalate (CAP) is a cellulose derivative obtained by esterification of cellulose with acetic acid and phthalic anhydride. It appears as a white to off-white, free-flowing powder that is insoluble in water but soluble in alkaline solutions and certain organic solvents. CAP is primarily used as an enteric coating agent in pharmaceutical formulations, providing resistance to acidic gastric fluids and enabling targeted release of drugs in the intestines. Due to its film-forming, pH-sensitive solubility, and protective properties, CAP is also applied in food, cosmetics, and specialty industrial uses.
Cross Carmellose Sodium BP
Cross Carmellose Sodium BP (also known as Croscarmellose Sodium or CCS) is a cross-linked sodium carboxymethyl cellulose polymer. It is a highly efficient, super-disintegrant commonly used in pharmaceutical tablet and capsule formulations. This white to off-white, odorless, and tasteless powder exhibits excellent swelling properties and rapid water uptake, which facilitates fast tablet disintegration and improves drug bioavailability. It is chemically stable, non-toxic, and compatible with a wide range of active pharmaceutical ingredients (APIs).
Povidone PVP25 USP
Povidone PVP25 USP is a synthetic polymer of vinylpyrrolidone with an average molecular weight of approximately 25,000. It is a water-soluble, non-toxic, and biodegradable polymer widely used as a binder, film former, stabilizer, and solubilizing agent in pharmaceutical, cosmetic, and industrial applications. Its excellent adhesive properties and compatibility with a wide range of substances make it essential in tablet formulations, topical products, and adhesives.
Pullulan
Pullulan is a natural polysaccharide polymer produced by the fermentation of starch by the fungus Aureobasidium pullulans. It is a water-soluble, tasteless, and odorless biopolymer widely used in the food, pharmaceutical, and cosmetic industries due to its excellent film-forming, adhesive, and oxygen barrier properties. Pullulan is biodegradable, non-toxic, and approved for use in various applications requiring edible and biodegradable films.
PVP K 30 USP
PVP K 30 USP (Polyvinylpyrrolidone K-30) is a water-soluble polymer widely used in pharmaceutical and cosmetic formulations. It serves as a binder, stabilizer, and film-forming agent, known for its excellent adhesive properties and compatibility with a wide range of ingredients. PVP K 30 USP is characterized by its medium molecular weight, making it ideal for tablet binding, enhancing solubility of poorly soluble drugs, and providing viscosity control in liquid formulations. This grade complies with USP standards ensuring suitability for pharmaceutical use.
Sodium Chloride (Industrial Salt)
Sodium Chloride (Industrial Salt) is a highly purified, sterile, and non-pyrogenic salt intended for intravenous, intramuscular, and subcutaneous administration. It is commonly used in medical and pharmaceutical settings as a key component of intravenous fluids, for rehydration therapy, electrolyte replenishment, and as a diluent for injectable drugs. This grade meets stringent pharmacopoeial standards (British Pharmacopoeia) ensuring safety and compatibility with parenteral use.
