Acidulants
Antioxidants
Nutraceutical Ingredients (food)
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Chromatography Chemicals
Spectroscopy Reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-28%
Hydrofluoric Acid HF
Original price was: $ 8.00.$ 7.74Current price is: $ 7.74.
Hydrogen Peroxide Food Grade
Original price was: $ 2.00.$ 1.44Current price is: $ 1.44.
Whatsapp Order
Hydrogen Peroxide Food Grade is a highly concentrated aqueous solution of hydrogen peroxide (H₂O₂), formulated specifically for use in food processing and related applications. It appears as a clear, colorless liquid with a slightly sharp, acrid odor. Renowned for its powerful oxidizing and bleaching properties, hydrogen peroxide is a strong antimicrobial agent and environmentally friendly disinfectant that decomposes into water and oxygen, leaving no harmful residues. The food-grade designation ensures compliance with strict purity standards, making it suitable for direct and indirect food contact uses, including sterilization, sanitation, and preservation.
Description
Hydrogen Peroxide Food Grade
Primary Uses
- Food Industry
- Sanitization and Disinfection: Used extensively for sterilizing food contact surfaces, equipment, and packaging materials to reduce microbial contamination and extend shelf life without chemical residues.
- Food Preservation: Employed as a bleaching and oxidizing agent in processing flour, cheese, and other food products to improve texture, color, and shelf stability.
- Bottle and Packaging Sterilization: Vital in aseptic packaging processes to sanitize containers and ensure product safety, especially for dairy, beverages, and liquid foods.
- Washing Agent: Used to sanitize fruits, vegetables, and other raw food materials by reducing microbial load and removing pesticide residues.
- Dairy Processing: Used in cleaning-in-place (CIP) systems for sterilization of milking equipment and dairy processing lines to prevent spoilage and contamination.
- Pharmaceutical and Cosmetic Industries
- Utilized in the production and sterilization of pharmaceutical products and personal care items, ensuring microbial control while complying with food-grade safety standards.
- Water Treatment
- Applied for disinfection and oxidation of drinking water and wastewater in food production facilities to maintain hygiene and comply with regulatory standards.
- Agriculture
- Used for seed treatment and crop sanitation to reduce fungal and bacterial pathogens, promoting healthier growth and yield.
Secondary Uses
- Textile Industry
- Used as a bleaching and disinfecting agent in the production of food-grade textiles such as packaging fabrics and food wrapping materials.
- Laboratory Applications
- Employed as an oxidizing agent and sterilizer in microbiology and food safety testing laboratories.
- Cleaning and Maintenance
- Used in sanitary cleaning agents for food processing plants, hospitals, and other sensitive environments requiring residue-free disinfection.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Hydrogen peroxide (aqueous solution)
- Common/Trade Name: Hydrogen Peroxide 35% Food Grade
- CAS Number: 7722-84-1
- HS Code: 2847.00.00
- Molecular Formula: H₂O₂
- Synonyms: Peroxide, Hydrogen peroxide solution, HP 35% FG
- Physical & Chemical Properties
- Physical State: Clear, colorless liquid
- Odor: Slightly sharp, acrid
- Boiling Point: Approximately 108 °C (decomposes before boiling)
- Density: ~1.13 g/cm³ (35% concentration)
- Solubility: Miscible with water
- pH: Slightly acidic (typically 3.5 to 4.5)
- Stability: Decomposes slowly releasing oxygen; stabilized with trace amounts of inhibitors
- Safety & Hazard Attributes
- GHS Classification:
- Oxidizing liquid: Category 1
- Skin corrosion/irritation: Category 1B
- Serious eye damage/eye irritation: Category 1
- Toxicity: Moderate irritant; harmful if swallowed or in contact with skin/eyes
- Exposure Limits: OSHA PEL 1 ppm (Ceiling) for vapor (varies with jurisdiction)
- Storage & Handling Attributes
- Container Type: High-density polyethylene (HDPE) or stainless steel containers
- Storage Conditions: Store in cool, ventilated, shaded areas away from direct sunlight, heat, and incompatible materials such as organic substances and metals
- Shelf Life: Typically 6-12 months under recommended storage
- Handling Notes: Use with adequate ventilation; avoid contact with combustible materials
- Regulatory & Compliance Attributes
- Complies with FDA and other food safety regulatory standards for food-grade hydrogen peroxide
- Approved for direct and indirect contact with food processing and packaging equipment
- Registered and monitored under relevant chemical safety laws (REACH, OSHA, EPA)
- Environmental & Health Impact
- Biodegradability: Breaks down rapidly into water and oxygen, environmentally friendly
- Ecotoxicity: Low toxicity to aquatic organisms at typical use concentrations
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Chemical-resistant gloves, safety goggles, face shield, protective apron
- Handling Guidelines: Use in well-ventilated areas; avoid inhalation of vapors and contact with skin or eyes; do not mix with incompatible substances such as organic materials or strong reducing agents
- Hygiene Practices: Wash hands thoroughly after handling; no eating or smoking in handling areas
- First Aid Measures
- Inhalation: Move affected person to fresh air; seek medical attention if symptoms persist
- Skin Contact: Rinse immediately with plenty of water for at least 15 minutes; remove contaminated clothing; seek medical advice if irritation occurs
- Eye Contact: Flush eyes with water for at least 15 minutes; seek immediate medical attention
- Ingestion: Do not induce vomiting; rinse mouth and seek medical help immediately
- Firefighting Measures
- Fire Hazards: Not flammable but supports combustion of other materials; can increase fire intensity
- Extinguishing Media: Use water spray, foam, or dry chemical; avoid using combustible materials for extinguishing
- Special Precautions: Firefighters should wear full protective gear and self-contained breathing apparatus
- Decomposition Products: Oxygen gas and water vapor, may accelerate burning of other materials
Related products
Bronopol
Bronopol (2-Bromo-2-nitropropane-1,3-diol) is a water-soluble, white crystalline powder or granules with a slight odor. It is a synthetic antimicrobial agent widely used as a preservative in personal care products, pharmaceuticals, cosmetics, and industrial applications. Bronopol exhibits broad-spectrum bactericidal and fungicidal activity, making it effective against a wide range of microorganisms. It works by releasing active formaldehyde slowly, which disrupts microbial metabolism and reproduction.
Calcium Hypochlorite Chlorine
Calcium Hypochlorite Chlorine is a white to slightly yellow crystalline powder or granules known for its strong oxidizing and disinfectant properties. The 65% grade indicates the available chlorine content, making it a powerful bleaching, sanitizing, and oxidizing agent. It is commonly used for water treatment, sanitation, and as a bleaching agent in industrial and household applications. Calcium Hypochlorite dissolves in water to release hypochlorous acid, which effectively kills bacteria, viruses, and fungi.
Chloroxylenol BP
Chloroxylenol BP is a pale yellow to colorless crystalline solid with a mild phenolic odor. It is a broad-spectrum antimicrobial agent widely used for its bactericidal, fungicidal, and antiviral properties. Chemically known as 4-chloro-3,5-dimethylphenol, Chloroxylenol acts by disrupting microbial cell membranes and inhibiting enzyme systems, making it effective against many gram-positive and some gram-negative bacteria, fungi, and viruses. Its relatively low toxicity and skin irritation profile compared to other phenols have made it a preferred active ingredient in antiseptics, disinfectants, and preservative formulations across pharmaceutical, personal care, household, and industrial applications.
Dichlorophene Technical
Dichlorophene Technical (also known as 2,2'-Methylenebis(4-chlorophenol)) is a chlorinated phenolic compound used primarily as an antimicrobial agent and disinfectant. It appears as a white to pale yellow crystalline powder with a characteristic phenolic odor. Known for its potent bactericidal and fungicidal properties, Dichlorophene is widely used in pharmaceutical formulations, personal care products, and industrial disinfectants. The “Technical” grade refers to its industrial or bulk purity form used as a raw material in manufacturing.
Enrofloxacin Hydrochloride
Enrofloxacin Hydrochloride is a broad-spectrum fluoroquinolone antibiotic used primarily in veterinary medicine. It is the hydrochloride salt of enrofloxacin, offering enhanced solubility and bioavailability. Enrofloxacin inhibits bacterial DNA gyrase and topoisomerase IV, disrupting DNA replication in Gram-negative and Gram-positive organisms as well as some Mycoplasma species. It is available as a white to off-white crystalline powder, used in injectable, oral, and topical formulations designed for livestock, companion animals, and aquatic species.
Lidocaine HCL BP
Lidocaine HCL BP is a white crystalline powder or granules that are highly soluble in water. It is a local anesthetic and antiarrhythmic agent widely used in medical and dental fields. Lidocaine HCL BP acts by blocking nerve signal transmission, providing rapid and effective numbing of targeted areas. It conforms to British Pharmacopoeia (BP) standards, ensuring pharmaceutical-grade purity and consistency. It is commonly formulated into injections, topical gels, creams, and patches for pain relief and arrhythmia treatment.
Sodium Nitrite
Sodium Nitrite is an inorganic white to slightly yellowish crystalline powder with the chemical formula NaNO₂. This versatile chemical serves as a powerful reducing agent, corrosion inhibitor, and food preservative, widely used in meat curing, pharmaceutical synthesis, and industrial applications. Its oxidative properties make it valuable for dye manufacturing and rubber processing while requiring careful handling due to its toxicity.
Sodium Persulfate
Sodium Persulfate is a white crystalline powder with the chemical formula Na₂S₂O₈. It is a powerful oxidizing agent widely used in industrial and chemical applications. This 25kg packaged product is highly soluble in water and decomposes to release oxygen, making it effective for polymerization, etching, and cleaning processes. Its strong oxidation properties and stability under storage conditions make it a preferred choice for various demanding applications.
