Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Cetrimide Powder
Cetrimide Powder is a high-purity quaternary ammonium compound widely used for its antiseptic, disinfectant, and surfactant properties. It is a cationic surfactant derived from cetyltrimethylammonium bromide and appears as a white to off-white crystalline powder with a slight characteristic odor. Known for its excellent antimicrobial efficacy against bacteria and fungi, cetrimide is frequently incorporated in pharmaceutical, personal care, and industrial formulations. It acts as a bactericidal agent, detergent, and emulsifier, providing effective cleaning and disinfecting action.
Cetrimide Powder
Primary Uses
- Pharmaceuticals & Medical
- Used as an antiseptic and disinfectant in wound cleaning solutions, surgical scrubs, and topical antiseptic creams and ointments.
- Incorporated in medicated shampoos and washes for treatment of dandruff and seborrheic dermatitis due to antimicrobial action.
- Acts as a surfactant and emulsifier in pharmaceutical formulations to enhance consistency and stability.
- Personal Care & Cosmetics
- Utilized in antiseptic creams, lotions, and skin cleansers.
- Functions as a foaming agent and cleansing surfactant in shampoos and body washes.
- Used in oral care products like mouthwashes for its antimicrobial properties.
- Industrial & Household
- Employed in disinfectant solutions and surface cleaners for hospitals and households.
- Used in water treatment processes as a biocide to control microbial growth.
Secondary Uses
- Laboratory & Research
- Used as a surfactant in biochemical and microbiological applications.
- Employed in DNA extraction protocols and as a detergent in molecular biology.
- Textile & Leather Processing
- Applied as a wetting and antiseptic agent in textile dyeing and leather treatment processes.
1. Basic Identification Attributes
- Chemical Name (IUPAC): N,N,N-trimethyl-1-hexadecylammonium bromide (major component)
- Common/Trade Name: Cetrimide Powder 98%
- CAS Number: 61789-75-3
- HS Code: 2923.29.00
- Molecular Formula: C19H42BrN
- Synonyms:
- Cetyltrimethylammonium bromide
- Hexadecyltrimethylammonium bromide
- Antiseptic quaternary ammonium compound
2. Physical & Chemical Properties
- Physical State: White to off-white crystalline powder
- Color & Odor: White; slight characteristic ammonium odor
- Melting Point: 55–60°C (decomposes)
- Boiling Point: Decomposes before boiling
- Density: ~1.01 g/cm³
- Solubility:
- Soluble in water (forms clear solutions)
- Soluble in alcohols and acetone
- Insoluble in hydrocarbons
- pH (1% aqueous solution): ~5.5–7.0
- Stability: Stable under recommended storage conditions; hygroscopic
3. Safety & Hazard Attributes
- Hazard Class (GHS): Harmful if swallowed; causes skin and eye irritation
- NFPA Ratings:
- Health: 2
- Flammability: 0
- Reactivity: 0
- Exposure Limits: No specific exposure limit established; avoid inhalation and skin contact
- Toxicity: Moderately toxic; potential irritant to mucous membranes and skin
- Reactivity: Stable; avoid mixing with anionic surfactants or oxidizers
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry, well-ventilated place away from incompatible materials
- Container Type: Sealed polyethylene or glass containers recommended
- Shelf Life: 2-3 years if stored properly
- Special Handling: Use personal protective equipment (PPE); avoid dust formation and inhalation
5. Regulatory & Compliance Attributes
- Pharmacopoeial Status: Listed in BP and USP as antiseptic grade
- Cosmetic Regulatory Status: Approved for use as preservative and antiseptic ingredient globally
- REACH Status: Registered
- Transportation: Not classified as hazardous for transport if packaged properly
- Waste Disposal: Dispose according to local environmental regulations
6. Environmental & Health Impact
- Ecotoxicity: Toxic to aquatic organisms; avoid release into waterways
- Persistence: Moderately persistent in the environment
- Bioaccumulation: Potential for bioaccumulation; handle waste responsibly
- Carcinogenicity/Mutagenicity: No evidence of carcinogenic or mutagenic effects at recommended use levels
- Biodegradability: Partial biodegradability; depends on environmental conditions
Safety Handling Precautions
- PPE: Gloves, protective goggles, dust mask or respirator if handling powder in bulk
- Handling: Avoid dust generation; use in well-ventilated areas
- Storage: Keep container tightly closed; store away from acids and anionic surfactants
- Hygiene: Wash hands and exposed skin thoroughly after handling
First Aid Measures
- Inhalation: Move to fresh air; if breathing is difficult, seek medical attention
- Skin Contact: Wash affected area with plenty of soap and water; seek medical advice if irritation persists
- Eye Contact: Rinse immediately with plenty of water for at least 15 minutes; seek medical attention
- Ingestion: Do not induce vomiting; rinse mouth and seek immediate medical attention
Firefighting Measures
- Fire Hazards: Not highly flammable; may burn under fire conditions
- Extinguishing Media: Use water spray, foam, dry chemical, or CO₂
- Special Precautions: Firefighters should wear full protective clothing and self-contained breathing apparatus
- Decomposition Products: May emit toxic fumes including nitrogen oxides, carbon monoxide, and hydrogen bromide on combustion
Related products
Boric Acid
Boric Acid, chemically known as hydrogen borate or boracic acid, is a weak, monobasic Lewis acid of boron. It appears as a white, crystalline powder or granules that are odorless and slightly soluble in water. Boric Acid is commonly used in antiseptics, insecticides, flame retardants, and as a buffering agent in various industrial and pharmaceutical applications. Due to its mild antiseptic and antifungal properties, it is often used in ophthalmic, dermatologic, and other personal care formulations. It also plays a key role in glass and ceramics manufacturing as well as in agriculture.
Chloroxylenol BP
Chloroxylenol BP is a pale yellow to colorless crystalline solid with a mild phenolic odor. It is a broad-spectrum antimicrobial agent widely used for its bactericidal, fungicidal, and antiviral properties. Chemically known as 4-chloro-3,5-dimethylphenol, Chloroxylenol acts by disrupting microbial cell membranes and inhibiting enzyme systems, making it effective against many gram-positive and some gram-negative bacteria, fungi, and viruses. Its relatively low toxicity and skin irritation profile compared to other phenols have made it a preferred active ingredient in antiseptics, disinfectants, and preservative formulations across pharmaceutical, personal care, household, and industrial applications.
Cross Carmellose Sodium BP
Cross Carmellose Sodium BP (also known as Croscarmellose Sodium or CCS) is a cross-linked sodium carboxymethyl cellulose polymer. It is a highly efficient, super-disintegrant commonly used in pharmaceutical tablet and capsule formulations. This white to off-white, odorless, and tasteless powder exhibits excellent swelling properties and rapid water uptake, which facilitates fast tablet disintegration and improves drug bioavailability. It is chemically stable, non-toxic, and compatible with a wide range of active pharmaceutical ingredients (APIs).
Dichlorophene Technical
Dichlorophene Technical (also known as 2,2'-Methylenebis(4-chlorophenol)) is a chlorinated phenolic compound used primarily as an antimicrobial agent and disinfectant. It appears as a white to pale yellow crystalline powder with a characteristic phenolic odor. Known for its potent bactericidal and fungicidal properties, Dichlorophene is widely used in pharmaceutical formulations, personal care products, and industrial disinfectants. The “Technical” grade refers to its industrial or bulk purity form used as a raw material in manufacturing.
Naphthalene Balls
Napthalene Balls are solid, crystalline balls made primarily of naphthalene, a white, volatile, aromatic hydrocarbon derived from coal tar or petroleum refining. Known for their strong, distinctive odor, naphthalene balls are widely used as moth repellents and deodorizing agents. Due to their sublimation property, they slowly vaporize at room temperature, releasing fumes that are toxic to moths and insects. They find broad applications in household pest control, industrial storage protection, and chemical manufacturing.
Propylparaben (Prop BH)
Prop BH, also known as Propylparaben or Propyl 4-Hydroxybenzoate, is an organic compound belonging to the paraben family of preservatives. It appears as colorless small crystals or a white crystalline powder with a characteristic mild odor and a slightly bitter taste. The compound is practically insoluble in cold water but readily soluble in alcohols, ethers, and other organic solvents. Propylparaben is widely recognized for its broad-spectrum antimicrobial activity, particularly effective against molds, yeasts, and bacteria. Propylparaben is manufactured for use as a preservative in various industrial applications and is not intended for direct human consumption without appropriate certification.
Sodium Carboxymethyl Cellulose
Sodium Carboxymethyl Cellulose , is a water-soluble anionic cellulose ether derived from natural cellulose. It appears as a white to off-white, odorless, tasteless powder or granule. Known for its excellent thickening, stabilizing, emulsifying, and water-retention properties, CMC is widely used in food, pharmaceutical, personal care, industrial, and detergent applications. It functions by modifying the rheological properties of solutions and suspensions, offering control over viscosity and flow. Its biocompatibility, non-toxicity, and biodegradability make it suitable for both human use and environmentally friendly formulations.
Sulfadiazine Base BP
Sulfadiazine Base BP is a broad-spectrum sulfonamide antibiotic used primarily in veterinary and human medicine to treat bacterial infections. It functions by inhibiting bacterial synthesis of folic acid, thereby preventing bacterial growth and proliferation. The British Pharmacopoeia (BP) grade ensures pharmaceutical-grade purity and quality suitable for formulation into tablets, suspensions, and topical preparations.
