Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Back to products
Phosphoric acid Technical Grade
Original price was: $ 3.12.$ 3.10Current price is: $ 3.10.
Styrene Acrylic
Whatsapp Order
Styrene Acrylic is a copolymer emulsion combining styrene and acrylic monomers, widely used as a versatile binder in coatings, adhesives, and construction materials. It offers excellent film-forming properties, adhesion, water resistance, and durability. This product enhances the performance and longevity of paints, sealants, textiles, and paper coatings, with flexibility for both indoor and outdoor applications. Styrene Acrylic emulsions are designed to meet stringent industrial and environmental standards.
Description
Styrene Acrylic
Primary Uses
- Coatings & Paints Industry
- Binder in Architectural Paints: Provides excellent adhesion, gloss, and durability to interior and exterior paints.
- Protective Coatings: Used in industrial coatings for corrosion resistance and weatherproofing.
- Textile Coatings: Enhances fabric hand, durability, and resistance to water and stains.
- Paper Coatings: Improves printability, gloss, and surface strength of coated papers.
- Adhesives Industry
- Pressure-sensitive Adhesives: Used in tapes and labels for strong bonding and flexibility.
- Construction Adhesives: Provides water resistance and durability for bonding building materials.
- Packaging Adhesives: Used for flexible and rigid packaging applications requiring quick set and strong adhesion.
- Construction Industry
- Mortar and Cement Modifiers: Improves flexibility, adhesion, and water resistance in tile adhesives, cementitious coatings, and grouts.
- Sealants and Caulks: Enhances elasticity and weather resistance in silicone and acrylic sealants.
Secondary Uses
- Textiles Industry
- Fabric Finishing Agent: Provides softness, stiffness, or water repellency depending on formulation.
- Nonwoven Binders: Used in nonwoven fabric production to improve strength and durability.
- Paper Industry
- Surface Sizing Agent: Enhances ink holdout and reduces absorbency in specialty papers.
- Wet Strength Additive: Improves paper resistance to moisture.
- Leather Industry
- Coating Agent: Used to provide protective films on leather products enhancing durability and appearance.
- Plastic & Rubber Industry
- Modifier for Plastics: Improves impact resistance and flexibility in PVC and other polymers.
- Adhesion Promoter: Enhances bonding between dissimilar materials in composites.
- Printing Industry
- Ink Binder: Acts as a binder in water-based inks to improve adhesion and gloss.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Copolymer of styrene and acrylic monomers
- Common/Trade Name: Styrene Acrylic Emulsion
- CAS Number: Not assigned to copolymer (styrene: 100-42-5; acrylic monomers vary)
- HS Code: 3906.90.00
- Synonyms: Styrene-acrylic copolymer, Styrene acrylic resin
2. Physical & Chemical Properties
- Physical State: Milky white liquid emulsion
- Color & Odor: White; mild odor
- Solubility: Dispersible in water; insoluble in organic solvents
- pH: 7.0 – 9.0 (typically neutral to slightly alkaline)
- Solid Content: 40-55% (varies by grade)
- Viscosity: Low to medium (depending on formulation)
- Density: Approx. 1.0 – 1.1 g/cm³
3. Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous
- Toxicity: Low toxicity under normal handling conditions
- Exposure Limits: No specific occupational exposure limits; follow standard chemical safety practices
4. Storage & Handling Attributes
- Storage Conditions: Store in sealed containers at 5-35 °C; protect from freezing and direct sunlight
- Container Type: Plastic drums, totes, or bulk containers
- Shelf Life: 6-12 months depending on storage conditions
- Handling Precautions: Avoid freezing, contamination, and prolonged skin contact
5. Regulatory & Compliance Attributes
- Manufactured under Good Manufacturing Practices (GMP)
- Complies with relevant REACH, TSCA, and OSHA HCS regulations
- Suitable for use in formulations compliant with VOC limits for paints and coatings
- Meets environmental standards for low volatile organic compounds emissions
6. Environmental & Health Impact
- Biodegradability: Partially biodegradable under aerobic conditions
- Ecotoxicity: Low toxicity to aquatic organisms
- Bioaccumulation: Not significant
- Environmental Notes: Wastewater treatment recommended to prevent polymer residue discharge
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE Required: Gloves and eye protection recommended
- Handling Guidelines: Use adequate ventilation; avoid skin and eye contact
- Storage Measures: Keep containers tightly closed and protected from freezing
First Aid Measures
- Inhalation: Move to fresh air if irritation occurs
- Skin Contact: Wash with soap and water
- Eye Contact: Flush with water for 15 minutes; seek medical attention if irritation persists
- Ingestion: Rinse mouth; obtain medical advice if necessary
Firefighting Measures
- Fire Hazards: Combustible when dried; aqueous emulsion is not flammable
- Extinguishing Media: Water spray, foam, dry chemical, CO₂
- Hazardous Combustion Products: Carbon monoxide, carbon dioxide, and other organic combustion products
Related products
Binder
A binder is a broad category of substances—organic or inorganic—used to hold different materials together in a cohesive mass. Common binders include natural polymers (starch, cellulose derivatives, proteins), synthetic resins (PVA, acrylics, phenolics), and inorganic binders (clays, cement, lime). They are essential in industries such as pharmaceuticals, construction, coatings, ceramics, adhesives, and printing, where they provide structural integrity, adhesion, and controlled release properties.
Clear Emulsion
Clear Emulsion is a transparent or translucent mixture of two immiscible liquids—typically oil and water—stabilized by emulsifying agents to form a stable, homogenous system. This product is widely used in cosmetics and personal care, pharmaceuticals, and specialty industrial applications due to its lightweight texture, ease of absorption, and aesthetic appeal. Clear emulsions offer a visually appealing, non-greasy feel with the advantages of both oil and water phases, delivering moisturizing, protective, and active ingredient-carrying benefits. Their clarity distinguishes them from traditional creamy emulsions, making them popular in modern skincare and cosmetic formulations.
Hydrocarbon Resins
Hydrocarbon Resins C5 And C9 Petroleum Resins are synthetic petroleum-derived resins produced through the polymerization of C5 (pentene) and C9 (nonene) fraction monomers. These resins appear as pale yellow to amber solid materials, usually in pellet or flake form, characterized by tackifying and adhesive properties. C5 resins are derived from aliphatic hydrocarbons, while C9 resins originate from aromatic hydrocarbons. Often blended, these resins provide a balance of hardness, tackiness, and compatibility with various polymers. Widely used as tackifiers, binders, and modifiers, C5 & C9 hydrocarbon resins enhance performance in adhesives, coatings, rubber compounding, and more.
Lacitex
Lacitex is a high-quality natural latex concentrate derived from Hevea brasiliensis (rubber tree) latex. It is a milky, white colloidal suspension primarily used in the manufacture of latex-based products such as gloves, adhesives, coatings, and foam rubber. Lacitex offers excellent film-forming properties, elasticity, and tensile strength. It provides superior binding, water resistance, and flexibility in finished products, making it widely valued in various industrial and manufacturing applications.
Linseed Oil
Linseed Oil, also known as flaxseed oil, is derived from the seeds of the flax plant (Linum usitatissimum). It is a pale yellow to amber oil with a mild, nutty aroma. Rich in omega-3 fatty acids and antioxidants, Linseed Oil is widely used in cosmetics, personal care, industrial applications, and traditional medicine. It is valued for its moisturizing, anti-inflammatory, and skin conditioning properties, as well as its drying qualities in paints and varnishes.
Medium Binder
Medium Binder is a versatile adhesive and binding agent formulated to enhance cohesion, strength, and durability in various industrial and construction applications. It improves the bonding properties between different materials, providing a reliable and consistent bond that resists environmental degradation. Medium Binder is suitable for use in composites, coatings, and concrete formulations, optimizing performance and structural integrity.
Petroleum Resin C9 Hydrocarbon
Petroleum Resin C9 Hydrocarbon is a thermoplastic hydrocarbon resin derived from the C9 fraction of petroleum cracking. It is a tackifying resin with excellent compatibility with various polymers, especially in adhesives, paints, rubber, and coatings industries. Known for its good color stability, fast curing, and strong adhesion properties, C9 Petroleum Resin enhances product performance in many industrial applications.
