Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Ceto Stearyl Alcohol
Whatsapp Order
Ceto Stearyl Alcohol 1618TA is a high-quality fatty alcohol blend primarily composed of cetyl (C16) and stearyl (C18) alcohols. It appears as a white, waxy solid or flakes with a mild fatty odor. This blend is widely used as an emollient, thickener, and co-emulsifier in cosmetic, pharmaceutical, and industrial formulations. Ceto Stearyl Alcohol 1618TA offers excellent lubricity, thickening, and stabilizing properties, enhancing the texture, consistency, and moisturizing characteristics of creams, lotions, and hair care products. It serves as a skin conditioning agent and contributes to the structural integrity of emulsions.
Description
Ceto Stearyl Alcohol
Primary UsesÂ
- Cosmetics & Personal Care
- Used as an emollient and thickening agent in creams, lotions, balms, and conditioners.
- Acts as a co-emulsifier in oil-in-water and water-in-oil emulsions, improving stability and texture.
- Provides a smooth, creamy texture and enhances skin feel in moisturizers and sunscreens.
- Used in hair conditioners and styling products to improve lubrication and manageability.
- Acts as a protective barrier agent, helping to lock moisture into the skin and hair.
- Pharmaceuticals
- Functions as a base and thickener in topical ointments, creams, and lotions.
- Improves viscosity and spreadability of medicated creams and emollient formulations.
- Used as a lubricant in tablet coatings and suppository bases.
- Industrial Applications
- Employed in lubricants, metalworking fluids, and plastic processing aids to improve flow and surface finish.
- Used in wax blends and polishes to impart smoothness and sheen.
 Secondary UsesÂ
- Food Industry
- Occasionally used in food-contact packaging coatings and non-food additives where fatty alcohols are permitted.
- Textile & Leather
- Utilized in textile softening and finishing formulations to improve fabric handle and water repellency.
- Applied in leather conditioners and waterproofing agents.
- Paints & Coatings
- Acts as a rheology modifier and stabilizer in waterborne paints and coatings.
- Household Products
- Included in cleaning formulations and detergents as a thickener and stabilizer.
KEY PRODUCT FEATURES
1. Basic Identification Attributes
- Chemical Name (IUPAC): Mixture of hexadecan-1-ol (cetyl alcohol) and octadecan-1-ol (stearyl alcohol)
- Common/Trade Name: Ceto Stearyl Alcohol 1618TA
- CAS Numbers:
- Cetyl Alcohol: 36653-82-4
- Stearyl Alcohol: 112-92-5
- HS Code: 3401.19.00
- Molecular Formula:
- Cetyl Alcohol: C16H34O
- Stearyl Alcohol: C18H38O
- Synonyms:
- 1618 Alcohol
- Cetyl/Stearyl Alcohol Blend
2. Physical & Chemical Properties
- Physical State: Solid waxy flakes or pastilles
- Color & Odor: White to pale cream; mild fatty odor
- Melting Point: 54–58°C
- Boiling Point: Decomposes before boiling
- Density: ~0.81 g/cm³ at 25°C
- Solubility:
- Insoluble in water
- Soluble in alcohols, oils, and organic solvents
- Stability: Stable under normal storage and handling conditions
3. Safety & Hazard Attributes
- Hazard Class (GHS): Not classified as hazardous
- NFPA Ratings:
- Health: 1
- Flammability: 1
- Reactivity: 0
- Exposure Limits: No specific limits established; standard good industrial hygiene practices recommended
- Toxicity: Low toxicity; widely regarded as safe in cosmetic and pharmaceutical use
- Irritation Potential: Minimal skin irritation potential; non-sensitizing
4. Storage & Handling Attributes
- Storage Conditions: Store in cool, dry place away from direct sunlight and ignition sources
- Container Type: Supplied in sealed bags, drums, or pails
- Shelf Life: Typically 36 months under proper storage
- Special Handling: Avoid dust formation; use PPE when handling large quantities
5. Regulatory & Compliance Attributes
- Cosmetic Regulatory Status: Approved for use in cosmetics and personal care products globally
- REACH Status: Registered
- Transportation: Not regulated as hazardous material
- Waste Disposal: Dispose of according to local regulations; biodegradable
6. Environmental & Health Impact
- Ecotoxicity: Low; biodegradable in environment
- Persistence: Readily biodegradable
- Bioaccumulation: Not expected
- Carcinogenicity/Mutagenicity: No known carcinogenic or mutagenic effects
- Biodegradability: Biodegrades naturally under aerobic conditions
SAFETY HANDLING PRECAUTIONS
Safety Handling Precautions
- PPE: Use gloves, goggles, and protective clothing for large-scale handling
- Handling: Avoid inhaling dust; use good ventilation
- Storage: Keep containers sealed and away from heat sources
- Hygiene: Wash hands after handling; do not eat or smoke in work area
First Aid Measures
- Inhalation: Remove to fresh air if dust inhaled; seek medical advice if breathing difficulty occurs
- Skin Contact: Wash with soap and water; seek medical attention if irritation develops
- Eye Contact: Flush with water for 15 minutes; seek medical help if irritation persists
- Ingestion: Not expected to be toxic; rinse mouth and seek medical advice if large amounts swallowed
Firefighting Measures
- Fire Hazards: Combustible; may burn if exposed to flame or high heat
- Extinguishing Media: Water spray, foam, dry chemical, COâ‚‚
- Special Precautions: Firefighters should wear full protective gear and breathing apparatus
- Decomposition Products: Carbon monoxide, carbon dioxide, and other hazardous fumes
Related products
Cetomacrogol PEG1000 (Ginonic CSA 20)
Cetomacrogol PEG (Ginonic CSA) is a polyethylene glycol-based nonionic surfactant and emulsifier with an average molecular weight of approximately 1000 Da. It appears as a white to off-white waxy solid or flakes with a neutral odor. This high-quality grade is widely used in cosmetic, pharmaceutical, and personal care formulations due to its excellent emulsifying, solubilizing, and moisturizing properties. Cetomacrogol PEG1000 (Ginonic CSA 20) facilitates stable oil-in-water emulsions, improves product texture and skin feel, and enhances the bioavailability of active ingredients. Its hydrophilic nature and compatibility with a wide range of ingredients make it a versatile additive in creams, lotions, ointments, and topical gels.
Fish Collagen
Fish Collagen is a natural protein derived from the skin, scales, and bones of various fish species through enzymatic hydrolysis or acid extraction. It is predominantly Type I collagen, known for its excellent bioavailability and biocompatibility. Fish Collagen typically appears as a fine white to off-white powder with low odor and high solubility in water and acidic solutions. It is widely prized in cosmetics, nutraceuticals, pharmaceuticals, and food industries due to its superior absorption compared to mammalian collagen, making it highly effective in skin, joint, and bone health applications. Fish Collagen supports the body’s extracellular matrix, promoting skin elasticity, hydration, and tissue repair.
Glycerol Monostearate Flakes
Glycerol Monostearate Flakes is a white to off-white waxy flake form emulsifier composed of 40% monoglycerides of fatty acids, primarily stearic and palmitic acids, combined with other glycerides and esters. Derived mainly from vegetable oils, this food-grade emulsifier is widely utilized in food, cosmetic, pharmaceutical, and industrial sectors for its multifunctional properties. GMS 40% flakes serve as effective emulsifiers, stabilizers, anti-caking agents, and texture enhancers, with excellent compatibility and versatility in formulations requiring semi-solid or solid fats.
Glycerol Monostearate Powder
Glycerol Monostearate Powder is a white to off-white, free-flowing powder composed of 50% monoglycerides of stearic and palmitic acids, typically derived from vegetable oils. It is a non-ionic emulsifier widely used in food, cosmetics, pharmaceuticals, plastics, and industrial applications. GMS functions as an emulsifying agent, stabilizer, thickener, anti-staling agent, and opacifier. In food, it improves texture and extends shelf life. In cosmetics and pharmaceuticals, it enhances creaminess and stability. GMS 50% is often blended with other emulsifiers or surfactants and is valued for its versatile functionality, safety, and compatibility with a wide range of ingredients.
Isopropyl Myristate
Isopropyl Myristate is a clear, colorless, and oily liquid ester formed by the reaction of isopropyl alcohol and myristic acid. It has a mild, pleasant odor and excellent spreading properties. IPM is widely used in cosmetics, pharmaceuticals, and industrial applications as an emollient, solvent, and penetration enhancer due to its ability to improve texture and absorption of topical formulations.
Isopropyl Palmitate
Isopropyl Palmitate IPP is a clear, colorless to pale yellow oily liquid formed by the esterification of isopropyl alcohol and palmitic acid. It has a mild odor and is widely used in cosmetic, pharmaceutical, and industrial formulations as an emollient, lubricant, and solvent. IPP is valued for its excellent skin absorption, non-greasy feel, and ability to improve texture and spreadability of topical products.
Lanolin Anhydrous
Lanolin Anhydrous is a purified, waxy substance derived from the sebaceous glands of sheep’s wool. It appears as a yellow to amber, semi-solid wax with a characteristic mild odor. Lanolin is highly valued for its excellent emollient, moisturizing, and protective properties, making it widely used in cosmetic, pharmaceutical, and personal care formulations. The anhydrous form is free from water, which enhances its stability and shelf life, and allows it to act as a natural barrier to lock moisture into the skin.
Latex
Latex is a natural or synthetic colloidal dispersion of polymer microparticles in an aqueous medium. Natural latex is harvested from rubber trees (Hevea brasiliensis) and appears as a milky fluid rich in rubber particles suspended in water. Synthetic latexes are produced from various monomers such as styrene-butadiene or acrylics. Latex exhibits excellent elasticity, flexibility, and adhesive properties. It is widely used in manufacturing gloves, balloons, coatings, adhesives, paints, and various molded products. Its film-forming ability, water resistance, and durability make it a versatile material across industries.
