Preservatives(food)
Flavors
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Oils
Carrier Oills
Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances (Cleaning)
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Dicalcium Phosphate Dihydrate
Dicalcium Phosphate Dihydrate (DCP Dihydrate) is an odorless, white crystalline powder or granule composed of calcium and phosphate in a hydrated form. It is widely used in the pharmaceutical, food, animal feed, and industrial sectors. It serves as a calcium and phosphorus supplement, excipient, and abrasive agent, valued for its stability, bioavailability, and neutral taste. DCP Dihydrate complies with various pharmacopeial standards (e.g., USP, BP, FCC) depending on the grade.
Dicalcium Phosphate Dihydrate
Primary Uses
- Pharmaceuticals
- Used as an excipient in tablets and capsules as a diluent, binder, and buffering agent.
- Offers excellent compressibility and flowability in direct compression formulations.
- Used in toothpaste as a gentle abrasive and polishing agent.
- Animal Feed & Veterinary
- Supplement in livestock and poultry feed as a bioavailable source of calcium and phosphorus, essential for bone and eggshell development.
- Used in pet supplements for nutritional fortification.
- Food & Nutraceuticals
- Used in mineral supplements, tablets, and powders as a source of calcium and phosphorus.
- Added to flour, cereals, and dairy products as a nutrient fortifier.
- Acts as a leavening agent in baking powders when combined with sodium bicarbonate.
Secondary Uses
- Dental Care Products
- Acts as a gentle abrasive and remineralization agent in oral care products like tooth powders and pastes.
- Fertilizers
- Occasionally used in specialized formulations as a soil conditioner or slow-release phosphorus source.
- Industrial Applications
- Used in ceramics and polishing compounds.
- Employed as a filler in non-toxic applications like plastics, paints, and sealants.
- Laboratory & Research Use
- Used as a reference compound or reagent in analytical chemistry and biology for phosphate and calcium studies.
1. Basic Identification Attributes
- Chemical Name (IUPAC): Calcium hydrogen phosphate dihydrate
- Common/Trade Name: Dicalcium Phosphate Dihydrate (DCP Dihydrate)
- CAS Number: 7789-77-7
- HS Code: 2835.25.00
- Molecular Formula: CaHPO₄·2H₂O
- Synonyms:
- Calcium phosphate dibasic dihydrate
- DCP Dihydrate
- Calcium monohydrogen phosphate dihydrate
2. Physical & Chemical Properties
- Physical State: Crystalline powder or granules
- Color & Odor: White; odorless and tasteless
- Melting Point: Decomposes before melting
- Boiling Point: Not applicable
- Density: ~2.31 g/cm³
- Solubility:
- Slightly soluble in water (~0.02 g/100 mL at 25°C)
- Insoluble in alcohol
- pH (suspension): 6.5–8.0
- Stability: Stable under normal conditions; loses water when heated
3. Safety & Hazard Attributes
- Hazard Class (GHS): Not classified as hazardous
- NFPA Ratings:
- Health: 0
- Flammability: 0
- Reactivity: 0
- Exposure Limits: None established; considered safe under normal use
- Toxicity: Non-toxic; high doses may cause constipation or hypercalcemia if consumed excessively
- Reactivity: Stable and non-reactive under normal handling
4. Storage & Handling Attributes
- Storage Conditions: Store in a cool, dry place away from moisture and strong acids
- Container Type: Fiber drums, HDPE bags, or food/pharma-grade containers
- Shelf Life: Up to 3 years if stored properly
- Special Handling: Use dry, clean scoops; avoid contamination and moisture exposure
5. Regulatory & Compliance Attributes
- FDA Status: GRAS (Generally Recognized as Safe) for food use
- USP/NF Status: Complies with United States Pharmacopeia (USP) and BP standards for pharmaceutical grade
- Food Additive Code (EU): E341(ii)
- REACH Status: Registered and compliant
- Transportation: Not regulated as hazardous material
- Waste Disposal: Dispose according to local, state, and national regulations
6. Environmental & Health Impact
- Ecotoxicity: Not harmful to aquatic or terrestrial environments
- Persistence: Non-persistent; breaks down naturally
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified as carcinogenic or mutagenic
- Biodegradability: Environmentally benign and safe
Safety Handling Precautions
Personal Protective Equipment (PPE):
- Gloves
- Dust mask or respirator (in dusty environments)
- Safety goggles
- Lab coat or apron
Handling Measures:
- Avoid creating or inhaling dust
- Use local exhaust ventilation when handling bulk material
- Wash hands after handling
Storage Measures:
- Keep containers tightly closed and in a dry area
- Avoid moisture to prevent caking or degradation
Hygiene Practices:
- Maintain general industrial hygiene
- Avoid food contact if using technical or feed-grade material
First Aid Measures
- Inhalation: Move to fresh air; rinse throat with water if irritation occurs
- Skin Contact: Wash with soap and water; no special treatment usually needed
- Eye Contact: Rinse thoroughly with water for several minutes; seek attention if irritation persists
- Ingestion: Non-toxic; rinse mouth with water; seek advice if large amounts are ingested
Firefighting Measures
- Fire Hazards: Non-flammable and non-combustible
- Extinguishing Media: Use media suitable for surrounding fire
- Special Precautions: No specific risks; wear standard protective gear
- Decomposition Products: None known under normal conditions
Related products
Cellulose Acetate Phthalate (CAP)
Cellulose Acetate Phthalate (CAP) is a cellulose derivative obtained by esterification of cellulose with acetic acid and phthalic anhydride. It appears as a white to off-white, free-flowing powder that is insoluble in water but soluble in alkaline solutions and certain organic solvents. CAP is primarily used as an enteric coating agent in pharmaceutical formulations, providing resistance to acidic gastric fluids and enabling targeted release of drugs in the intestines. Due to its film-forming, pH-sensitive solubility, and protective properties, CAP is also applied in food, cosmetics, and specialty industrial uses.
Cross Carmellose Sodium BP
Cross Carmellose Sodium BP (also known as Croscarmellose Sodium or CCS) is a cross-linked sodium carboxymethyl cellulose polymer. It is a highly efficient, super-disintegrant commonly used in pharmaceutical tablet and capsule formulations. This white to off-white, odorless, and tasteless powder exhibits excellent swelling properties and rapid water uptake, which facilitates fast tablet disintegration and improves drug bioavailability. It is chemically stable, non-toxic, and compatible with a wide range of active pharmaceutical ingredients (APIs).
Dill Seed Oil Terpeneless
Dill Seed Oil Terpeneless is a refined essential oil obtained by steam distillation of the seeds of Anethum graveolens, with terpenes removed to reduce its sharpness and volatility. It has a mild, sweet, herbaceous aroma with faint spicy undertones. This oil is prized for its improved stability, softer fragrance profile, and enhanced suitability in cosmetic, pharmaceutical, and cleaning applications. Traditionally used for digestive support and antimicrobial properties, dill seed oil terpeneless is incorporated in natural personal care products, aromatherapy, and household formulations.
Hydroxypropyl Methylcellulose
Hydroxypropyl Methylcellulose HPMC, also known as hypromellose, is a semi-synthetic, non-ionic cellulose ether derived by chemically modifying cellulose through methylation and hydroxypropylation. It is a white to off-white, odorless, tasteless powder that dissolves in cold water to form clear, viscous solutions. HPMC is renowned for its thickening, film-forming, emulsifying, and controlled-release properties. It is widely used in pharmaceuticals, food, cosmetics, construction, and industrial applications due to its safety profile, versatility, and compatibility with various ingredients.
Polyethyl Glycol( PEG 6000)
Polyethyl Glycol( PEG 6000) is a high-molecular-weight polymer derived from ethylene oxide. It appears as a white, waxy solid or flake and is non-toxic, water-soluble, and chemically stable. PEG 6000 is widely used in pharmaceuticals, cosmetics, food processing, industrial formulations, and biotechnology, valued for its lubricating, solubilizing, binding, and moisturizing properties. It is odorless and tasteless, making it suitable for sensitive formulations.
Povidone PVP25 USP
Povidone PVP25 USP is a synthetic polymer of vinylpyrrolidone with an average molecular weight of approximately 25,000. It is a water-soluble, non-toxic, and biodegradable polymer widely used as a binder, film former, stabilizer, and solubilizing agent in pharmaceutical, cosmetic, and industrial applications. Its excellent adhesive properties and compatibility with a wide range of substances make it essential in tablet formulations, topical products, and adhesives.
Pullulan
Pullulan is a natural polysaccharide polymer produced by the fermentation of starch by the fungus Aureobasidium pullulans. It is a water-soluble, tasteless, and odorless biopolymer widely used in the food, pharmaceutical, and cosmetic industries due to its excellent film-forming, adhesive, and oxygen barrier properties. Pullulan is biodegradable, non-toxic, and approved for use in various applications requiring edible and biodegradable films.
Sodium Chloride (Industrial Salt)
Sodium Chloride (Industrial Salt) is a highly purified, sterile, and non-pyrogenic salt intended for intravenous, intramuscular, and subcutaneous administration. It is commonly used in medical and pharmaceutical settings as a key component of intravenous fluids, for rehydration therapy, electrolyte replenishment, and as a diluent for injectable drugs. This grade meets stringent pharmacopoeial standards (British Pharmacopoeia) ensuring safety and compatibility with parenteral use.
