Acidulants
Antioxidants
Nutraceutical Ingredients (food)
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Chromatography Chemicals
Spectroscopy Reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Back to products
Hydrochloric Acid HCL 270 kg Drum
Original price was: $ 1.00.$ 0.86Current price is: $ 0.86.
Hydrocarbon Resins C5 And C9 Petroleum Resins
Whatsapp Order
Hydrocarbon Resins C5 And C9 Petroleum Resins are synthetic petroleum-derived resins produced through the polymerization of C5 (pentene) and C9 (nonene) fraction monomers. These resins appear as pale yellow to amber solid materials, usually in pellet or flake form, characterized by tackifying and adhesive properties. C5 resins are derived from aliphatic hydrocarbons, while C9 resins originate from aromatic hydrocarbons. Often blended, these resins provide a balance of hardness, tackiness, and compatibility with various polymers. Widely used as tackifiers, binders, and modifiers, C5 & C9 hydrocarbon resins enhance performance in adhesives, coatings, rubber compounding, and more.
Description
Hydrocarbon Resins C5 And C9 Petroleum Resins
Primary Uses
- Adhesives Industry
- Act as tackifiers and binding agents in pressure-sensitive adhesives (PSAs) such as tapes, labels, and sticky notes.
- Improve adhesion strength and bonding performance in hot melt adhesives (HMAs) used in packaging, bookbinding, woodworking, and footwear.
- Serve as compatibility enhancers between polymers and tackifiers in solvent-based and water-based adhesive formulations.
- Rubber and Tire Industry
- Function as softening and reinforcing agents in rubber compounding to enhance processing, tack, and grip of tires and conveyor belts.
- Improve low-temperature flexibility and abrasion resistance of rubber products.
- Paints and Coatings
- Used as modifiers to enhance gloss, hardness, and adhesion in industrial and automotive coatings.
- Improve flow and leveling characteristics in paints and varnishes.
- Printing Inks
- Serve as resins in printing inks to improve adhesion, gloss, and drying properties.
- Sealants and Caulks
- Provide tack and binding properties in sealants and caulks used in construction and automotive sealing applications.
- Plastic and Polymer Industry
- Employed as modifiers in plastic compounding to enhance impact strength and processability of polymers such as polystyrene and polyethylene.
Secondary UsesÂ
- Rubberized Asphalt
- Added to asphalt formulations to improve flexibility, adhesion, and durability of roofing and road materials.
- Hot Melt Road Marking Paints
- Used as film formers and tackifiers in road marking paints for improved durability and weather resistance.
- Cosmetics and Personal Care
- Occasionally used in specialty cosmetic adhesives (e.g., eyelash glue) for tack and durability.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Base: Petroleum-derived hydrocarbon polymers (C5 and C9 fractions)
- Common/Trade Name: Hydrocarbon Resins C5 & C9
- CAS Number: Mixtures (varies by resin type, typically proprietary blends)
- HS Code: 3905.90.00
- Molecular Formula: Complex mixture of C5 and C9 hydrocarbons polymerized
- Synonyms: C5 Resin, C9 Resin, Petroleum Hydrocarbon Resin, Tackifying Resin
- Physical & Chemical Properties
- Physical State: Solid (pellets, flakes, or powder)
- Color & Odor: Pale yellow to amber; mild petroleum odor
- Softening Point: Typically 90–120°C (Ring & Ball method)
- Density: Approx. 1.0–1.1 g/cm³
- Solubility: Soluble in aromatic and aliphatic solvents; insoluble in water
- Compatibility: Compatible with various polymers like natural rubber, styrene-butadiene rubber, ethylene-vinyl acetate, and others
- Safety & Hazard Attributes
- GHS Classification: Not classified as hazardous; combustible solid
- Toxicity: Low toxicity; no significant acute toxicity reported
- Exposure Limits: No specific occupational exposure limits established; avoid dust inhalation
- Storage & Handling Attributes
- Container Type: Sealed polyethylene bags or drums
- Storage Conditions: Store in cool, dry, well-ventilated area away from heat and ignition sources
- Shelf Life: 12–24 months under recommended conditions
- Handling Notes: Avoid dust generation; use proper PPE to prevent inhalation
- Regulatory & Compliance Attributes
- Complies with regulatory standards for industrial and commercial use
- Not intended for food contact unless specified by manufacturer
- REACH registered in applicable jurisdictions
- Environmental & Health Impact
- Biodegradability: Poorly biodegradable due to synthetic hydrocarbon nature
- Ecotoxicity: Low aquatic toxicity but avoid environmental release
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: No evidence of carcinogenic or mutagenic effects
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Dust mask or respirator, gloves, safety goggles
- Handling Guidelines: Use in well-ventilated areas; minimize dust exposure
- Hygiene Practices: Wash hands after handling; avoid ingestion and inhalation
- First Aid Measures
- Inhalation: Move to fresh air; seek medical attention if symptoms persist
- Skin Contact: Wash with soap and water; seek medical advice if irritation occurs
- Eye Contact: Rinse with plenty of water for 15 minutes; consult physician if irritation persists
- Ingestion: Rinse mouth; seek medical advice if large amounts ingested
- Firefighting Measures
- Fire Hazards: Combustible solid; dust may form explosive mixtures with air
- Extinguishing Media: Use foam, dry chemical, or COâ‚‚; avoid water jets on burning material
- Special Precautions: Wear protective equipment; prevent dust dispersion
- Combustion Products: Carbon monoxide, carbon dioxide, and hydrocarbons
Related products
Anhydrous Aluminum Chloride
Anhydrous Aluminum Chloride (AlCl₃) is a white to pale yellow crystalline solid known for its strong Lewis acid properties. It is a key catalyst widely used in organic synthesis, especially in Friedel-Crafts alkylation and acylation reactions. Due to its high reactivity with moisture, it must be stored and handled under strictly anhydrous conditions. Anhydrous Aluminum Chloride also finds applications in polymerization, pharmaceuticals, and the production of dyes, pharmaceuticals, and petrochemicals.
Benzoic Acid
 Benzoic Acid is a white crystalline solid with a faint, pleasant odor, classified as a simple aromatic carboxylic acid. It is widely used as a food preservative, antimicrobial agent, and chemical intermediate. Naturally occurring in many plants, it is commercially produced through oxidation of toluene or extraction from natural sources. Benzoic acid is valued for its ability to inhibit the growth of mold, yeast, and certain bacteria, making it essential in food preservation and cosmetic formulations. It also serves as a precursor in the manufacture of various pharmaceuticals, dyes, and plasticizers.
Cobalt Carbonate
Cobalt Carbonate is a rose-red to purplish powder with a metal content of approximately 46% cobalt by weight. It is an inorganic compound primarily used as a source of cobalt, either as a raw material in chemical synthesis or as a micronutrient in various formulations. It is slightly soluble in water and decomposes upon heating, releasing carbon dioxide and leaving cobalt oxide (CoO). Cobalt Carbonate is used in ceramics, catalysts, animal nutrition, batteries, and metal surface treatments. Its controlled release of cobalt makes it useful in both industrial and biological applications.
Hydrochloric Acid HCL
Hydrochloric Acid HCL is a highly corrosive, strong mineral acid consisting of hydrogen chloride gas dissolved in water to a concentration of approximately 33% by weight. It appears as a clear, colorless to slightly yellow liquid with a sharp, pungent odor. HCl 33% is widely used in industrial, chemical, and laboratory applications due to its strong acidic properties, high reactivity, and versatility. It plays a crucial role in pH control, metal processing, chemical synthesis, and cleaning processes across numerous sectors.
Liquid Chlorine
 Liquid Chlorine is a pale yellow-green, highly reactive chemical primarily composed of chlorine dissolved in water or as liquefied chlorine gas under pressure. It is widely used as a powerful disinfectant, bleaching agent, and oxidizer in water treatment, sanitation, and various industrial applications. Due to its strong antimicrobial properties, liquid chlorine effectively controls bacteria, viruses, algae, and other microorganisms, ensuring safe potable water and hygienic conditions.
Rubber Accelerator MBTS
Rubber Accelerator MBTS (Mercaptobenzothiazole Disulfide) is a crucial chemical used in the vulcanization process of rubber. It accelerates the cross-linking of rubber molecules, enhancing the elasticity, strength, and durability of the final rubber products. MBTS is favored for its effective acceleration properties and is widely used in the production of tires, footwear, hoses, and various rubber goods.
Sasol Phenol
Sasol Phenol is a high-purity, industrial-grade phenol produced by Sasol, widely used as a key raw material in the manufacture of plastics, resins, and chemicals. Phenol is an aromatic organic compound characterized by a hydroxyl group (-OH) attached to a benzene ring. It serves as a precursor in producing bisphenol A, caprolactam, and phenolic resins. Sasol Phenol is known for its consistent quality, purity, and suitability for diverse industrial applications including chemical synthesis, pharmaceuticals, and adhesives.
Worm Wood Oil
Worm Wood Oil is an essential oil derived from the leaves and flowering tops of the Artemisia absinthium plant, native to Europe, Asia, and North Africa. Obtained through steam distillation, Wormwood Oil is characterized by its sharp, herbaceous, bitter, and slightly woody aroma. It contains bioactive compounds such as thujone, camphor, and cineole, which contribute to its potent antimicrobial, insecticidal, and digestive-stimulating properties. Traditionally used in herbal medicine and digestive tonics, Wormwood Oil finds applications in aromatherapy, natural pest control, perfumery, and pharmaceuticals.
