Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Fresh Herbs
Ground Spices
Whole Spices
Spice Blends
Dried Herbs
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders-28%
Hydrogen Peroxide Tech Grade
Original price was: $ 2.00.$ 1.44Current price is: $ 1.44.
Whatsapp Order
Hydrogen Peroxide Tech Grade is a highly concentrated aqueous solution of hydrogen peroxide (H₂O₂) designed primarily for industrial and technical applications. It is a clear, colorless liquid with a sharp, acrid odor. Known for its strong oxidizing, bleaching, and disinfecting properties, this tech-grade formulation is typically used where high reactivity is required, often in non-food processes. It decomposes into environmentally benign by-products—water and oxygen—making it a preferred agent for sustainable industrial processes.
Description
Hydrogen Peroxide Tech Grade
Primary Uses
- Industrial and Manufacturing
- Pulp and Paper Industry: Used extensively for bleaching wood pulp and paper fibers to achieve bright, white products without chlorine-based chemicals.
- Textile Industry: Employed as a bleaching and disinfecting agent for cotton, wool, and synthetic fibers to improve whiteness and fabric quality.
- Chemical Synthesis: Acts as a key oxidizing agent in the production of organic chemicals, epoxides, and peroxides; also used in the synthesis of various pharmaceuticals and intermediates.
- Water and Wastewater Treatment: Applied in industrial wastewater and process water treatment for oxidation of organic pollutants, disinfection, and odor control.
- Environmental Remediation: Used for in-situ chemical oxidation to break down soil and groundwater contaminants such as hydrocarbons and chlorinated solvents.
- Cleaning and Sanitizing
- Industrial Equipment Cleaning: Utilized in cleaning-in-place (CIP) systems to sanitize and remove organic residues in food processing, pharmaceutical, and beverage manufacturing plants.
- Surface Treatment: Used for sterilization and disinfection of surfaces, pipelines, and tanks in industrial facilities.
- Mining and Metallurgy
- Applied in ore processing and extraction to oxidize impurities and enhance metal recovery; also used in gold leaching processes.
Secondary Uses
- Electronics Industry
- Used for etching and cleaning silicon wafers and electronic components to remove organic and inorganic contaminants.
- Agriculture
- Occasionally used as a soil disinfectant and to control pathogens in hydroponic and greenhouse farming.
- Cosmetic and Pharmaceutical Raw Material
- Serves as a raw material or intermediate in the manufacture of cosmetic actives and disinfectants, though it must be purified and diluted for such uses.
- Research and Laboratory
- Employed in laboratories as a reagent for oxidation, sterilization, and analytical chemistry.
KEY ATTRIBUTES
- Basic Identification Attributes
- Chemical Name (IUPAC): Hydrogen peroxide (aqueous solution)
- Common/Trade Name: Hydrogen Peroxide 50% Tech Grade
- CAS Number: 7722-84-1
- HS Code: 2847.00.00
- Molecular Formula: H₂O₂
- Synonyms: Peroxide, Hydrogen peroxide solution 50%, HP 50% Tech
- Physical & Chemical Properties
- Physical State: Clear, colorless liquid
- Odor: Sharp, acrid
- Boiling Point: Approximately 118 °C (decomposes before boiling)
- Density: ~1.20 g/cm³ (50% concentration)
- Solubility: Completely miscible with water
- pH: Typically 3.5 or lower
- Stability: Unstable, decomposes releasing oxygen; stabilized with inhibitors
- Safety & Hazard Attributes
- GHS Classification:
- Oxidizing liquid: Category 1
- Skin corrosion/irritation: Category 1B
- Serious eye damage/irritation: Category 1
- Toxicity: Corrosive; harmful if inhaled, ingested, or on skin contact
- Exposure Limits: OSHA PEL 1 ppm ceiling for vapor (varies by region)
- Storage & Handling Attributes
- Container Type: HDPE drums, stainless steel containers specially designed for peroxide handling
- Storage Conditions: Store in a cool, dry, ventilated area, away from sunlight, heat sources, metals, organic materials, and reducing agents
- Shelf Life: Generally 6-12 months under optimal storage
- Handling Notes: Use appropriate PPE; avoid contamination and rapid decomposition
- Regulatory & Compliance Attributes
- Compliant with industrial chemical regulations; not for food or pharmaceutical use without further purification
- Subject to hazardous material transport and handling regulations (DOT, ADR, IMDG)
- Environmental & Health Impact
- Biodegradability: Breaks down readily into oxygen and water, environmentally benign at typical exposure
- Ecotoxicity: Low environmental toxicity at diluted concentrations; avoid direct release in high concentration
- Bioaccumulation: Not expected to bioaccumulate
- Carcinogenicity/Mutagenicity: Not classified
SAFETY HANDLING PRECAUTIONS
- Safety Handling Precautions
- PPE Required: Acid-resistant gloves, goggles, face shield, protective apron, and respirator with acid gas filters
- Handling Guidelines: Use in well-ventilated areas; avoid inhalation and skin contact; prevent contamination and rapid decomposition
- Hygiene Practices: Wash hands after handling; prohibit eating, drinking, or smoking in work areas
- First Aid Measures
- Inhalation: Move to fresh air; administer oxygen if needed; seek immediate medical attention if breathing difficulties occur
- Skin Contact: Rinse thoroughly with water for at least 15 minutes; remove contaminated clothing; seek medical care for burns or irritation
- Eye Contact: Flush with water for at least 15 minutes; urgent medical care required for burns or irritation
- Ingestion: Do NOT induce vomiting; rinse mouth and seek immediate medical attention
- Firefighting Measures
- Fire Hazards: Supports combustion; can intensify fires; reacts violently with organic materials and metals
- Extinguishing Media: Use water spray or fog; avoid dry chemical extinguishers unless water unavailable
- Special Precautions: Firefighters must wear full protective clothing and self-contained breathing apparatus (SCBA)
- Decomposition Products: Oxygen and steam; may produce toxic gases under fire conditions
Related products
Absorption Tower
An Absorption Tower is a vertical vessel used in industrial processes to remove specific components from gas streams by contact with a liquid solvent. This equipment facilitates mass transfer between the gas and liquid phases, allowing targeted pollutants or valuable compounds to be absorbed efficiently. Absorption Towers are commonly employed in chemical plants, refineries, and environmental control systems for gas scrubbing, purification, and recovery applications. They are designed for optimal gas-liquid contact, often using packing materials or trays to enhance surface area and improve absorption efficiency.
Bentonite Powder
Bentonite powder is a naturally occurring absorbent clay primarily composed of montmorillonite, a type of smectite clay mineral. It exhibits excellent swelling and water absorption properties, making it highly versatile in industrial and commercial applications. Bentonite forms a gel-like substance when mixed with water, which imparts viscosity and plasticity. It is used extensively for its binding, sealing, and adsorptive characteristics. Its fine powder form allows for easy incorporation in various processes including drilling, foundry, cosmetics, pharmaceuticals, and agriculture.
Calcium Nitrate
Calcium Nitrate is a highly soluble, white crystalline salt composed of calcium and nitrate ions. It is commonly available as a tetrahydrate (Ca(NO₃)₂·4H₂O). Known for its excellent solubility in water, calcium nitrate is widely used as a fertilizer providing both calcium and nitrogen to plants. It improves soil structure, enhances nutrient uptake, and prevents disorders such as blossom-end rot in fruits. Beyond agriculture, calcium nitrate serves in wastewater treatment, concrete acceleration, and industrial chemical processes.
Indion Cation Resin
Indion Cation Resin is a synthetic ion exchange resin designed primarily for the removal of positively charged ions (cations) from water and various liquid streams. Typically composed of a sulfonated polystyrene-divinylbenzene (PS-DVB) copolymer, this resin features a highly porous bead structure with functional groups that exchange hydrogen or sodium ions for calcium, magnesium, iron, and other metallic cations. Available in different forms (strong acid cation, weak acid cation), Indion Cation Resin is widely used in water treatment, industrial processes, and purification systems.
Liquid Chlorine
Liquid Chlorine is a pale yellow-green, highly reactive chemical primarily composed of chlorine dissolved in water or as liquefied chlorine gas under pressure. It is widely used as a powerful disinfectant, bleaching agent, and oxidizer in water treatment, sanitation, and various industrial applications. Due to its strong antimicrobial properties, liquid chlorine effectively controls bacteria, viruses, algae, and other microorganisms, ensuring safe potable water and hygienic conditions.
Nitric Acid
Nitric Acid is a concentrated aqueous solution of nitric acid (HNO₃) commonly used as a strong oxidizing acid in numerous industrial, laboratory, and manufacturing processes. It is a highly corrosive, colorless to yellowish liquid with a pungent odor. Nitric Acid 68% is fundamental in the production of fertilizers, explosives, dyes, and pharmaceuticals. It is also widely used in metal treatment, etching, and cleaning applications due to its powerful oxidizing and nitrating properties.
Sodium Metasilicate Pentahydrate
Sodium Metasilicate Pentahydrate is a white crystalline solid containing five molecules of water of crystallization. It is widely used for its alkaline and detergent properties, making it effective in cleaning, water treatment, and as a corrosion inhibitor. The pentahydrate form is commonly preferred in detergent and industrial applications where controlled moisture content is beneficial. It dissolves readily in water, forming strongly alkaline solutions useful in various industries.
Sodium Persulfate
Sodium Persulfate is a white crystalline powder with the chemical formula Na₂S₂O₈. It is a powerful oxidizing agent widely used in industrial and chemical applications. This 25kg packaged product is highly soluble in water and decomposes to release oxygen, making it effective for polymerization, etching, and cleaning processes. Its strong oxidation properties and stability under storage conditions make it a preferred choice for various demanding applications.
