Preservatives(food)
Flavor Enhancers
Acidulants
Sweeteners
Antioxidants
Colorants(food)
Nutraceutical Ingredients (food)
Nutrient Supplements
Emulsifiers
Collectors
Dust Suppressants
Explosives and Blasting Agents
Flocculants and Coagulants
Frothers
Leaching Agents
pH Modifiers
Precious Metal Extraction Agents
Antioxidants(plastic)
Colorants (Pigments, Dyes)
Fillers and Reinforcements
Flame Retardants
Monomers
Plasticizers
Polymerization Initiators
Stabilizers (UV, Heat)
Antifoaming Agents
Chelating Agents
Coagulants and Flocculants
Corrosion Inhibitors
Disinfectants and Biocides
Oxidizing Agents
pH Adjusters
Scale Inhibitors( water)
Antioxidants(cosmetic)
Emollients
Fragrances and Essential Oils
Humectants
Preservatives
Surfactants(cosmetic)
Thickeners
UV Filters
Fertilizers
Soil Conditioners
Plant Growth Regulators
Animal Feed Additives
Biostimulants
Pesticides (Herbicides, Insecticides, Fungicides)
Active Pharmaceutical Ingredients (APIs)
Excipients
Solvents(pharmaceutical)
Antibiotics
Antiseptics and Disinfectants
Vaccine Adjuvants
Nutraceutical Ingredients (pharmaceutical)
Analgesics & Antipyretics
Analytical Reagents
Solvents(lab)
Chromatography Chemicals
Spectroscopy Reagents
microbiology-and-cell-culture-reagents
Molecular Biology Reagents
Biochemical Reagents
Inorganic and Organic Standards
Laboratory Safety Chemicals
Specialty Laboratory Chemicals(Special Laboratory Equipment)
Demulsifiers
Hydraulic Fracturing Fluids
Scale Inhibitors(oil)
Surfactants(oil)
Drilling Fluids
Dyes and Pigments
Bleaching Agents
Softening Agents
Finishing Agents
Antistatic Agents
Admixtures
Waterproofing Agents
Sealants and Adhesives
Curing Compounds
Concrete Repair Chemicals
Anti-Corrosion Coatings
Surfactants(cleaning)
Builders
Enzymes
Solvents (Cleaning)
Fragrances
Electronic Chemicals
Catalysts
Lubricants
Photographic Chemicals
Refrigerants
Automotive chemicals
Pyrotechnic Chemicals
Biodegradable Surfactants
Bio-based Solvents
Renewable Polymers
Carbon Capture Chemicals
Wastewater Treatment Chemicals
Pigments
Solvents(paint)
Specialty Coatings
Binders/Resins
Additives
Driers
Anti-Corrosion Agents
Functional Coatings
Application-Specific Coatings
Leavening Agents
Dough Conditioners
Flour Treatments
Fat Replacers
Decoratives
Preservatives(baking)
Plasticizers & Softeners
Reinforcing Agents
Adhesion Promoters
Vulcanizing Agents
Antidegradants
Blowing Agents
Fillers & Extenders
Accelerators & Retarders
Formaldehyde (Formalin)
Original price was: $ 1.55.$ 1.44Current price is: $ 1.44.
Formaldehyde (Formalin) is an aqueous solution containing approximately 37% formaldehyde by weight, stabilized typically with 10-15% methanol to prevent polymerization. It is a clear, colorless liquid with a pungent, penetrating odor. Formaldehyde is a simple aldehyde widely used as a disinfectant, preservative, and chemical intermediate. Formalin’s powerful antimicrobial and tissue-fixation properties make it essential in medical, laboratory, industrial, and manufacturing applications. It is one of the most commonly used chemicals worldwide for sterilization, embalming, and resin production.
Formaldehyde (Formalin)
Primary Uses
- Medical and Laboratory
- Used extensively as a tissue fixative in histology, pathology, and anatomical studies to preserve biological specimens by cross-linking proteins and halting decay.
- Employed in embalming fluids to preserve human and animal remains.
- Used for sterilizing surgical instruments and disinfecting medical equipment and laboratories.
- Industrial Applications
- Key raw material in the manufacture of resins such as urea-formaldehyde, phenol-formaldehyde, and melamine-formaldehyde resins used in adhesives, laminates, plywood, and particleboard.
- Used as a fumigant and disinfectant in industrial sanitation and preservation.
- Utilized in the production of plastics, coatings, textiles, and paper treatments.
- Agriculture
- Used as a fungicide, bactericide, and pesticide in controlled applications.
- Applied to disinfect soil and farming equipment to control pathogens.
- Water Treatment
- Employed as a biocide in cooling towers, wastewater treatment, and industrial water systems to control microbial growth.
- Cosmetics and Consumer Products
- Used in very low concentrations as a preservative in cosmetic formulations (regulated due to toxicity concerns).
Secondary Uses
- Research and Analytical Chemistry
- Used as a standard reagent in chemical synthesis and analytical tests.
- Involved in polymerization reactions and cross-linking in biochemical applications.
- Textile Industry
- Applied in wrinkle-resistant and crease-proof finishing agents for fabrics.
- Waste Management
- Utilized in stabilization of sewage sludge and waste products to reduce pathogens and odors.
| PACK SIZE | 35kg |
|---|
1. Basic Identification Attributes
- Chemical Name (IUPAC): Methanal
- Common/Trade Name: Formalin, Formaldehyde Solution
- CAS Number: 50-00-0
- HS Code: 2912.11
- Molecular Formula: CH2O
- Synonyms: Formaldehyde solution, Methylene glycol (in solution), Methanal
2. Physical & Chemical Properties
- Physical State: Clear liquid
- Color & Odor: Colorless; strong pungent, irritating odor
- Boiling Point: ~100 °C (aqueous solution)
- Density: ~1.08 g/cm³
- Solubility: Completely miscible with water; soluble in alcohol and ether
- pH: Slightly acidic to neutral (4-7) depending on concentration
- Stability: Stable under cool, dark conditions; polymerizes upon prolonged storage or exposure to heat and light without stabilizer
3. Safety & Hazard Attributes
- Hazard Class (GHS): Flammable liquid (Category 3), Acute toxicity, Skin corrosion/irritation, Serious eye damage/irritation, Carcinogenicity (Category 1B)
- Toxicity: Highly toxic by inhalation, ingestion, and skin absorption
- Exposure Limits: OSHA PEL: 0.75 ppm (8-hr TWA), NIOSH REL: 0.016 ppm (ceiling)
4. Storage & Handling Attributes
- Storage Conditions: Store in tightly closed containers in a cool, well-ventilated area away from heat and ignition sources
- Container Type: Corrosion-resistant steel or plastic containers with vapor-tight seals
- Shelf Life: Typically 1-2 years if stored properly
- Handling Precautions: Use explosion-proof equipment; avoid vapor inhalation and direct contact; use personal protective equipment
5. Regulatory & Compliance Attributes
- Subject to strict regulations worldwide due to toxicity and carcinogenicity
- Listed as a hazardous substance by OSHA, EPA, REACH, and other authorities
- Usage limits and occupational exposure strictly controlled
6. Environmental & Health Impact
- Biodegradability: Readily biodegrades in the environment under aerobic conditions
- Ecotoxicity: Toxic to aquatic life with long-lasting effects
- Bioaccumulation: Not expected to bioaccumulate significantly
- Carcinogenicity/Mutagenicity: Classified as a human carcinogen (IARC Group 1) with mutagenic potential
Safety Handling Precautions
- PPE Required: Full protective clothing, chemical-resistant gloves, safety goggles, face shield, and respiratory protection with formaldehyde cartridges or supplied air
- Handling Guidelines: Work in well-ventilated or exhaust-controlled areas; avoid inhalation and skin contact; no open flames or sparks nearby
- Storage Measures: Store away from oxidizing agents, strong acids, and alkalis; keep containers sealed and upright
- Hygiene Practices: Wash hands and exposed skin thoroughly after handling; no eating, drinking, or smoking in work areas
First Aid Measures
- Inhalation: Move affected person to fresh air immediately; provide oxygen or artificial respiration if necessary; seek urgent medical care
- Skin Contact: Remove contaminated clothing; wash affected skin with plenty of water and soap; seek medical attention if irritation or burns occur
- Eye Contact: Rinse eyes with plenty of water for at least 15 minutes; obtain immediate medical attention
- Ingestion: Do NOT induce vomiting; rinse mouth; seek immediate medical help
Firefighting Measures
- Fire Hazards: Flammable liquid; vapors can form explosive mixtures with air; emits toxic gases (formaldehyde, carbon monoxide) on burning
- Extinguishing Media: Use alcohol-resistant foam, dry chemical, carbon dioxide (CO₂), or water spray
- Special Precautions: Firefighters must wear self-contained breathing apparatus and full protective gear
- Decomposition Products: Formaldehyde, carbon monoxide, carbon dioxide, and other toxic gases
Related products
Ammonium Cupric Chloride
Ammonium Cupric Chloride is a blue-green crystalline inorganic compound composed of copper, ammonium, and chloride ions. It is widely used as a source of copper in agricultural fungicides and bactericides, as well as in electroplating, chemical synthesis, and textile dyeing. Its antimicrobial properties make it valuable for controlling fungal and bacterial infections in plants. Additionally, it serves as a precursor in various industrial and laboratory applications.
Busan
Busan is a brand name associated with a comprehensive range of specialty chemicals, primarily including surfactants, dispersants, and performance additives. These products are engineered to optimize the properties of coatings, paints, inks, adhesives, and other industrial formulations. Busan specialty chemicals enhance formulation stability, improve pigment dispersion, control rheology, and boost wetting and flow characteristics, leading to superior application and end-use performance. Designed for versatility and efficiency, Busan products are widely used across the coatings, printing, plastics, and chemical manufacturing industries.
Distilled Water
Distilled Water is purified water that has been processed through distillation, a method involving evaporation and subsequent condensation to remove impurities, salts, minerals, and organic matter. This results in ultra-pure, clear, odorless, and tasteless water free of dissolved solids and contaminants. Distilled water is non-conductive, neutral in pH under ideal storage, and chemically stable. It is widely used across pharmaceutical, laboratory, medical, industrial, and consumer applications where high water purity is critical.
Ferrous Sulphate Heptahydrate
Ferrous Sulphate Heptahydrate, also known as iron(II) sulfate heptahydrate, is a pale green crystalline solid containing seven molecules of water of crystallization (FeSO₄·7H₂O). It is a widely used inorganic iron compound characterized by its high iron content (approximately 20% Fe) and good solubility in water. This hydrated salt is commonly used in agriculture, pharmaceuticals, water treatment, and various industrial processes. The heptahydrate form is preferred for many applications due to its stability, ease of handling, and cost-effectiveness.
Ferrous Sulphide
Ferrous Sulphide (FeS) is an inorganic iron-sulfur compound appearing as a dark gray to black crystalline powder or solid. It has low solubility in water but reacts with acids to release hydrogen sulfide gas. It is used in numerous industrial and chemical processes due to its sulfide content and reactive properties. Ferrous Sulphide serves as a key intermediate in metallurgy, chemical synthesis, wastewater treatment, pigment production, and more.
Glacial Acetic Acid Tech grade
Glacial Acetic Acid Tech grade is a clear, colorless liquid with a pungent vinegar-like odor. It is a less refined form of acetic acid primarily used for industrial and technical applications rather than food or pharmaceutical uses. Typically available in concentrations ranging from 80% to glacial (99-100%), it serves as a crucial chemical reagent, solvent, and intermediate in various industrial processes.
Hydrogen Peroxide Food Grade
Hydrogen Peroxide Food Grade is a highly concentrated aqueous solution of hydrogen peroxide (H₂O₂), formulated specifically for use in food processing and related applications. It appears as a clear, colorless liquid with a slightly sharp, acrid odor. Renowned for its powerful oxidizing and bleaching properties, hydrogen peroxide is a strong antimicrobial agent and environmentally friendly disinfectant that decomposes into water and oxygen, leaving no harmful residues. The food-grade designation ensures compliance with strict purity standards, making it suitable for direct and indirect food contact uses, including sterilization, sanitation, and preservation.
Iodine Crystals
Iodine Crystals are high-purity elemental iodine in solid crystalline form. These dark violet-black crystals have a characteristic pungent odor and sublime easily at room temperature, releasing violet iodine vapors. Iodine is a halogen element widely used for its antiseptic, oxidizing, and chemical reagent properties in pharmaceutical, industrial, and laboratory applications.
